Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTST-C170KGKT by Lite-on Technology is a 1.4mm GREEN LED with WATER CLEAR lens. It has a peak wavelength of 574nm, forward current of 0.03A, and luminous intensity of 35.0mcd. Ideal for surface mount applications in electronics due to its compact size and wide viewing angle of 130°.
Median Price
$0.037
Lifecycle Status
Suppliers In-Stock
51
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.120
100+ parts
$0.057
1k+ parts
$0.040
10k+ parts
$0.030
DigiKey
$0.130
$0.060
$0.043
$0.034
Future Electronics
-
Arrow
$0.029
Verical
$0.031
Chip1Stop
$0.020
RS (Exports)
$0.074
$0.058
Freelance Electronics
$0.019
DF Sales Co.
$0.032
Nova Conductors
$0.076
TME
$0.105
$0.051
$0.021
Component Electronics Inc.
$0.090
$0.080
IBS Electronics
Chip Stock
NAC Semi
$0.075
Vyrian
Dan-Mar Components
Schukat
$0.062
$0.036
$0.028
Diverse Electronics
Right Parts Inc.
Rutronik
$0.024
Prism Electronics
Connector Distribution Corp
Lakeland Logistics Inc
Semtec, LLC
ACDS - Activité Composants Distribution Service
Atlantic Semiconductor
Bristol Electronics
Martec Srl
J & M Industries LLC
Pegasus Components GmbH
Sunrise Surplus Inc.
Resion
Connect4Technologies Inc.
Huijzer Components
Semi Source
Sensible Micro Corp
Quantum Digital Technology
LWI Electronics Inc
ComSIT Distribution GmbH
EMSNET
Elcom Components
PC Components Company LLC
Classic Components Corporation
Contempo Components LLC
Lantek
Technoshack Inc.
Electronics Depot
Bas Electronics GmbH & Co. KG
Holdelec - ElecDif-Pro
Semicontronic
$0.017
$0.016
Argo Parts USA
$0.064
Continental Prestige Electronics
Corohmni
Advanced Electronics
$0.066
$0.063
Aranea Global
$0.071
Aztec Data Supply Inc.
$0.550
Perfect Parts
iodParts Technologies Inc.
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Lucentia Tech
Authorized Procurement Solutions
Assy Fe
GreenTree Electronics
Robosynatics
S.R.D Solutions
Having a single configuration simplifies the design and installation process, making it a cost-effective and efficient choice.
The small size of 1.4 mm allows for compact designs and versatile placement in various electronic applications.
With a maximum forward current of 0.03 A, this LED can handle efficient power consumption while providing bright illumination.
The peak wavelength of 574 nm ensures a specific color output, in this case, green, making it ideal for applications that require this precise color.
The water clear lens type provides high light transmission and visibility, enhancing the brightness and clarity of the LED output.
Being a single color LED simplifies the application as it emits only one color, making it suitable for specific color requirements.
Having only 2 terminals simplifies the circuit connection process, reducing complexity and installation time.
With a high maximum operating temperature of 85°C, this LED can withstand elevated temperatures, ensuring reliability in various environments.
The low height of 1.1 mm allows for a slim profile, making it suitable for applications where space is limited.
The rectangular shape provides a larger emitting surface area compared to other shapes, resulting in a more uniform and intense light output.
The low minimum operating temperature of -55°C ensures functionality even in extreme cold conditions.
The tin terminal finish provides good conductivity and solderability, ensuring secure and reliable connections.
The green color output is ideal for applications where green light is required or preferred, offering versatility in design options.
The TR packaging method in a 7-inch reel format allows for easy handling, storage, and automated assembly in manufacturing processes.
The terminal pitch of 2.1 mm provides sufficient space for easy soldering and connection, enhancing the installation efficiency.
With a wide viewing angle of 130°, this LED offers a broad illumination area, making it suitable for applications requiring wide light coverage.
The nominal luminous intensity of 35.0 mcd provides a bright and consistent light output, enhancing visibility and illumination in various applications.
The surface mounting feature allows for easy and secure installation on PCBs, reducing assembly complexity and ensuring a stable connection.
Visible LEDs LTST-C170KGKT attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
LTST-C170KGKT Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
Taitron Components
Nte Electronics
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
Crystalonics
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
MLCAWT-H1-0000-0000E1
Wolfspeed
Wolfspeed's MLCAWT-H1-0000-0000E1 is a single color LED with max forward current of 0.35A and height of 1.2mm. It operates at up to 150°C, emits white light at 3.4V, ideal for applications requiring high luminous intensity like automotive lighting.
HDSP-4850
Broadcom
HDSP-4850 by Broadcom is a 10-element single color LED array with peak wavelength of 566nm. It has a max forward current of 0.03A and operates b/w -20 to 85°C. Ideal for applications requiring green light emission in bulk packaging, this rectangular LED array features separate configuration and radial mounting.
HSMH-C150
HSMH-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 660nm. It has max forward current of 0.03A and viewing angle of 170°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
LGT67K-H2K1-24-Z
Osram Opto Semiconductors
The Osram Opto Semiconductors LGT67K-H2K1-24-Z is a 2.4mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. It is ideal for applications requiring a green light source, with a viewing angle of 120° and surface mounting feature.
HLMP-1700-B00A2
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SSL-LX3052YD
Lumex
SSL-LX3052YD by Lumex is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 70°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
HSMS-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C190
HSMH-C190 by Broadcom is a 1mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications, it offers red light with luminous intensity of 17.0mcd, making it suitable for various lighting and display purposes.
3007
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Configuration: SINGLE; Color: RED;
1304
Wilbrecht Electronics
SINGLE COLOR LED;
LTST-C171KGKT
Lite-on Technology
LTST-C171KGKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 574nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55°C to 85°C temperatures.
597-3111-502F
Dialight
Dialight's 597-3111-502F is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.03A and forward voltage of 2.5V, making it ideal for applications requiring bright red light emission in compact spaces like surface mount PCBs.
LTST-C190TBKT-5A
LTST-C190TBKT-5A by Lite-on Technology is a 1.1mm BLUE LED with 0.02A current, peak wavelength of 468nm, and 130° viewing angle. Ideal for surface mount applications in electronics, it operates b/w -20°C to 80°C temperatures and has a luminous intensity of 28.1mcd.
TLUV5300
Vishay Telefunken
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.5; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Silver (Sn/Ag);
TLMY1100-GS08
Vishay Intertechnology's TLMY1100-GS08 is a 1.6mm SINGLE COLOR LED with peak wavelength of 591nm, forward current of 0.03A, and luminous intensity of 0.05cd. Ideal for applications requiring YELLOW light emission in compact spaces with operating temperatures ranging from -40 to 100°C.
LTL-4231N-022
LTL-4231N-022 by Lite-on Technology is a 3mm green LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for applications requiring a single color LED with diffused lens, such as indicator lights in electronic devices. Operating temperature range from -55 to 100°C makes it versatile for various environments.
HLMP-1301-E00A1
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.95; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-C190TBKT-10A
XHP35B-H0-0000-0D0UB440G
HLMP-1700-B00A1
HLMP-1700-B00A1 by Broadcom is a 3mm SINGLE COLOR LED with peak wavelength of 635nm. It has max forward current of 0.007A and viewing angle of 50°. Ideal for applications requiring high efficiency red light emission in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTST-C190GKT
LTST-C190GKT by Lite-on Technology is a 1.1mm GREEN LED with WATER CLEAR lens, operating at -55 to 85 °C. It has a peak wavelength of 565nm, forward current of 0.03A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with max luminous intensity of 9.9mcd.
LTST-C190KGKT
LTST-C190KGKT by Lite-on Technology is a 1.1mm GREEN LED with peak wavelength of 574nm, suitable for surface mount applications. It has a max forward current of 0.03A and viewing angle of 130°, making it ideal for low-power indicator lights in electronic devices. Operating temperature ranges from -30 to 85 °C.
LTST-C191KGKT
LTST-C191KGKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and ultra bright green color. It has a max forward current of 0.03A, viewing angle of 130°, and nominal luminous intensity of 44.5mcd. Ideal for surface mount applications in electronics requiring high brightness green-yellow illumination.
LTST-C190KRKT
LTST-C190KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm. It has a max forward current of 0.025A and viewing angle of 260°, making it ideal for surface mount applications in various electronic devices. With a water clear lens type and red color, this LED operates b/w -30°C to 85°C temperature range.
LTST-C191KRKT
LTST-C191KRKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 639nm, emitting RED light at 54.0mcd luminous intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55 to 85°C, making it suitable for various electronic devices.
LTST-C150CKT
LTST-C150CKT by Lite-on Technology is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and a viewing angle of 130°. Ideal for surface mount applications, this red LED operates b/w -55 to 85 °C temperatures.
LTST-C191KGKT-5A
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
LTST-C193KGKT-5A
LTST-C193KGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 574nm, viewing angle of 130°, and luminous intensity of 16.25mcd. Ideal for surface mount applications in electronics, it operates b/w -55°C to 85°C temperature range and has a compact size of 1.15mm x 0.35mm.
LTST-C190GKTT
LTST-C190GKTT by Lite-on Technology is a single color LED with peak wavelength of 565nm and viewing angle of 130°. With a size of 1.06mm, it has a max forward current of 0.03A making it suitable for surface mount applications in electronics requiring green light emission.
LTST-C19HE1WT
LTST-C19HE1WT by Lite-on Technology is a single color LED with diffused white lens. It has a max forward current of 0.03A and operates b/w -20°C to 80°C. Ideal for applications requiring blue, blue-green, orange-red light emission with a min luminous intensity of 130cd.
LTST-C191TBKT-5A
Visible LEDs;
LTST-C191TBKT
LTST-C191TBKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with WATER CLEAR lens emitting ULTRA BRIGHT BLUE light at 468nm wavelength. It has a max forward current of 0.02A and viewing angle of 130°, making it ideal for surface mount applications requiring high luminous intensity up to 104.0mcd.
LTST-C170KRKT
LTST-C170KRKT by Lite-on Technology is a 1.4mm single color LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
LTST-C193TBKT-5A
LTST-C193TBKT-5A by Lite-on Technology is a 1.15mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and operates b/w -20°C to 80°C temperature range.
LTST-C191KRKT-5A
LTST-C150KGKT
LTST-C150KGKT by Lite-on Technology is a single color LED with a peak wavelength of 574nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 130° and nominal luminous intensity of 35.0mcd. Ideal for surface mount applications requiring green-yellow light emission in compact spaces.
LTST-C193KRKT-5A
LTST-C193KRKT-5A by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.02A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices. With a viewing angle of 130° and water clear lens type, it offers high luminous intensity at 26.05mcd.
LTST-C195KGJRKT
LTST-C195KGJRKT by Lite-on Technology is a 1.5mm DUAL COLOR LED with WATER CLEAR lens, featuring RED/GREEN colors and peak wavelengths of 639nm/574nm. It has a max forward current of 0.03A and viewing angle of 130°, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity.
LTST-C170KEKTBINL
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved