Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's SML-D15MWT86 is a 1.2mm SINGLE COLOR LED with 0.035A max forward current and 71.0mcd nominal luminous intensity. Ideal for surface mount applications, it emits YELLOWISH GREEN light at -40 to 100°C, making it suitable for various visible LED lighting projects.
Median Price
$0.128
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.300
100+ parts
$0.145
1k+ parts
$0.108
10k+ parts
$0.078
Chip1Stop
-
$0.127
Element14
$9.960
$8.180
Newark
$0.121
$0.089
$0.085
Verical
$0.129
$0.072
Farnell
$0.116
$0.087
Nova Conductors
$0.120
Vyrian
Resion
Semicontronic
$0.059
$0.058
$0.057
Ampacity Inc.
Argo Parts USA
Netroflash
Corohmni
$0.173
Continental Prestige Electronics
$0.282
$0.124
$0.071
$0.053
CoreStaff
$0.335
$0.213
$0.134
Aztec Data Supply Inc.
$0.440
Kepictronics
iodParts Technologies Inc.
Perfect Parts
This single configuration allows for easy installation and operation of the LED.
Compact size making it suitable for applications with limited space.
Efficient power consumption for extended use.
Provides a soft and diffused light output.
Consistent and uniform color output.
Simple and straightforward connectivity.
Can withstand high temperature environments.
Low profile design for versatility in mounting options.
Sleek and modern design for a variety of applications.
Suitable for use in cold environments.
Provides a minimum level of brightness for visibility.
Unique color option for distinctive lighting effects.
Convenient and organized packaging for handling and storage.
Protection against reverse current to prolong LED lifespan.
Standard terminal pitch for compatibility with various boards.
High luminous intensity output for visibility in different lighting conditions.
Easy and secure mounting on circuit boards or other surfaces.
Visible LEDs SML-D15MWT86 attributes and parameters. Explore more Visible LEDs devices from ROHM
Additional Features:
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Size:
Terminal Pitch:
SML-D15MWT86 Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LTST-C170GKT
Lite-on Technology
LTST-C170GKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 130° and nominal luminous intensity of 6.0mcd, making it suitable for various lighting solutions.
150060YS73220
Wuerth Elektronik & Kg
SINGLE COLOR LED;
3036
Wilbrecht Electronics
XHP50B-00-0000-0D0BJ40E3
Cree Led
BR1111C-TR
Stanley Electric
Stanley Electric's BR1111C-TR is a 1.2mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.025A. Ideal for surface mount applications, it offers a viewing angle of 141° and nominal luminous intensity of 11.7mcd, making it suitable for various visible LED lighting projects.
VLMG1500-GS08
Vishay Intertechnology
Vishay Intertechnology's VLMG1500-GS08 is a 0.5mm SINGLE COLOR LED with peak wavelength of 611nm. It has max forward current of 0.03A and viewing angle of 130°. Ideal for surface mount applications, it emits YELLOW GREEN light at 90.0mcd luminous intensity.
UHD1110-FKA-CL1A13R3Q1BBQFMF3
Wolfspeed
UHD1110-FKA-CL1A13R3Q1BBQFMF3 by Wolfspeed is a COMMON ANODE TRIPLE COLOR LED with 4 terminals. It has a Max Forward Current of 0.01 A and Max Operating Temperature of 85°C. Ideal for applications requiring RGB color output in compact spaces.
HLMP-3301-D0000
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMA-C265
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 150 deg; Maximum Reverse Voltage: 5 V; Maximum Operating Temperature: 85 Cel;
HLMP-6300-F0011
Broadcom
HLMP-6300-F0011 by Broadcom is a single color LED with a peak wavelength of 635nm and a max forward current of 0.03A. It is commonly used in applications such as indicator lights, displays, and signage due to its high efficiency red color and axial mount configuration.
598-8170-107F
Dialight
Dialight's 598-8170-107F is a single color LED with a water-clear lens, emitting green light. With a size of 1.2mm and max forward current of 0.025A, it's ideal for surface mount applications requiring a viewing angle of 140° and luminous intensity of 20.0mcd.
LSGT676-P7Q7-1+N7P7-24-ZB
Osram Opto Semiconductors
Osram Opto Semiconductors' LSGT676-P7Q7-1+N7P7-24-ZB is a dual color LED with separate configuration and 2.4mm size. It has a max forward current of 0.03A and peak wavelengths of 645nm (hyper bright super red) and 572nm (hyper bright green). This LED is suitable for surface mount applications requiring a viewing angle of 120°.
HLMP-1700
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: CMOS COMPATIBLE; No. of Functions: 1; Configuration: SINGLE;
XHP35B-00-0000-0D0UB227G
HSME-C170
HSME-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm, emitting GREEN light. With a viewing angle of 170° and luminous intensity of 50.0mcd, it's ideal for surface mount applications in electronics for visual indicators or displays.
SML-D12P8WT86C
ROHM
ROHM's SML-D12P8WT86C is a 1.2mm GREEN LED with max forward current of 0.02A and forward voltage of 2.2V. Ideal for surface mount applications, it has a min operating temp of -40°C and max operating temp of 85°C, making it suitable for various lighting solutions.
KP-1608SYCK
Kingbright Electronic
Kingbright Electronic's KP-1608SYCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 590nm and luminous intensity of 120.0mcd. Ideal for applications requiring SUPER BRIGHT YELLOW illumination, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
598-8110-107F
Dialight's 598-8110-107F is a single color LED with water clear lens, 1.2mm size, and red color. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications requiring a compact rectangular shape and nominal luminous intensity of 40mcd at an operating temperature range from -30°C to 85°C.
KP-2012SURC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
OVLLG8C7
Tt Electronics Plc
OVLLG8C7 by Tt Electronics Plc is a 5mm SINGLE COLOR LED with peak wavelength of 521nm and max forward current of 0.02A. Ideal for applications requiring GREEN light emission, such as indicator lights in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-D12M8WT86
ROHM SML-D12M8WT86 is a 1.2mm SINGLE COLOR LED with diffused milky white lens. It has a max forward current of 0.02A and nominal luminous intensity of 25.0mcd, suitable for surface mount applications in visible LEDs category.
SML-D12M8WT86C
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-D12U8WT86
ROHM's SML-D12U8WT86 is a 1.2mm SINGLE COLOR LED with 0.02A forward current, emitting RED light at 63.0mcd intensity. Ideal for surface mount applications in electronics, it operates b/w -40 to 85°C temperatures and has a max reverse voltage of 5V.
SML-D12M8WT86Q
ROHM SML-D12M8WT86Q is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOWISH GREEN light. Ideal for surface mount applications, it has a luminous intensity of 25.0mcd and operates b/w -40°C to 85°C temperature range.
SML-D12M8WT86M
ROHM SML-D12M8WT86M is a 1.2mm SINGLE COLOR LED with milky white lens emitting YELLOWISH GREEN light at 25.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
SML-D12M8WT86N
ROHM's SML-D12M8WT86N is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOWISH GREEN light at 25.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its compact size and milky white lens design.
SML-D12M8WT86P
ROHM's SML-D12M8WT86P is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOWISH GREEN light at 25.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and milky white lens.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.3; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-D12P8WT86CJ
Visible LEDs; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
SML-D12P8WT86CK
Visible LEDs; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
SML-D12U1WT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-D12U8WT86C
SML-D12M8WT86CN
SML-D12U8WT86Q
ROHM SML-D12U8WT86Q is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting RED light at 63.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and milky white lens for uniform light dispersion.
SML-D12U8WT86CP
SML-D12U1WT86Q
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 51.5; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-D12U8WT86S
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-D12P8WT86
ROHM SML-D12P8WT86 is a 1.2mm SINGLE COLOR LED with 0.02A forward current, emitting PURE GREEN light at 6.3mcd intensity. Ideal for surface mount applications in electronics, it operates b/w -40 to 85°C temperatures and has a max reverse voltage of 5V.
SML-D12Y8WT86
ROHM SML-D12Y8WT86 is a 1.2mm single color LED with diffused milky white lens emitting yellow light. It has a max forward current of 0.02A and nominal luminous intensity of 63.0mcd, suitable for surface mount applications in electronics requiring compact, low-power yellow lighting solutions.
SML-D15MWT87
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 71.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved