Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE WITH BUILT-IN DIODE; Case Connection: ISOLATED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Modulus Dynamics
$3.520
$3.379
$3.238
Component Stockers USA
$99.990
Corphita
Microchip USA
Silicon Controlled Rectifiers (SCR) TD162N14KOFHPSA1 attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Infineon Technologies
Case Connection:
Configuration:
Maximum DC Gate Trigger Current:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum RMS On-state Current:
Reference Standard:
Repetitive Peak Off-state Voltage:
Repetitive Peak Reverse Voltage:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
TD162N14KOFHPSA1 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Changzhou Starsea Electronics
Renesas Electronics
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
MCC162-16IO1
IXYS Corporation
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
2N686A
2N686A by Texas Instruments is a Silicon Controlled Rectifier with max DC Gate Trigger Current of 40mA, Non Repetitive Peak On-state Current of 250A, and Max On-state Current of 18A. It operates b/w -60°C to 125°C and is ideal for applications requiring high current switching capabilities.
TS420-600B-TR
STMicroelectronics' TS420-600B-TR is a SCR with 600V repetitive peak reverse voltage, 30A non-repetitive peak on-state current, and 0.2mA max DC gate trigger current. It's used in applications requiring high surge current handling capabilities and precise switching control in compact spaces.
SKKH92/16E
Semikron International
SKKH92/16E by Semikron International is a Silicon Controlled Rectifier with max DC Gate Trigger Current of 150mA, Non Repetitive Peak On-state Current of 2000A, and Max On-state Current of 95A. Ideal for applications requiring high current switching such as industrial power control systems.
EC103D1
SCR; Surface Mount: NO; Maximum On-state Current: .5 A; Terminal Finish: Matte Tin (Sn); Maximum On-state Voltage: 1.35 V; Non Repetitive Peak On-state Current: 9 A;
BTW69-800RG
BTW69-800RG by STMicroelectronics is a single SCR with 800V repetitive peak reverse voltage and 610A non-repetitive peak on-state current. It has a max DC gate trigger current of 80mA, making it suitable for applications requiring high power switching capabilities in industrial equipment and motor control systems. The package style is flange mount with isolated case connection, offering reliable performance in harsh environments with an operating temperature range from -40°C to 125°C.
2N1599
Hi-tron Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Terminal Form: WIRE; Minimum Operating Temperature: -60 Cel;
2N1597
Harris Semiconductor
SCR; Surface Mount: NO; Maximum Leakage Current: 6 mA; Minimum Operating Temperature: -60 Cel; JESD-609 Code: e0; Maximum On-state Current: 1.6 A;
STT1900N16P55XPSA1
Infineon Technologies
STT1900N16P55XPSA1 by Infineon Technologies is a Silicon Controlled Rectifier with 1.32V max on-state voltage, 200mA max DC gate trigger current, and 17000A non-repetitive peak on-state current. It is used in applications requiring high power switching capabilities such as industrial motor drives and power supplies.
S6055R
Littelfuse
The Littelfuse S6055R is a single SCR with max DC gate trigger current of 40mA and non-repetitive peak on-state current of 650A. It has a package style of flange mount, suitable for applications requiring high on-state current handling capabilities in industrial settings. Operating temperature ranges from -40 to 125°C, making it versatile for various environments.
MCC312-16IO1
2N5062
SCR; Surface Mount: NO; Non Repetitive Peak On-state Current: 10 A; Maximum DC Gate Trigger Voltage: .8 V; Maximum DC Gate Trigger Current: .2 mA; Maximum Leakage Current: .01 mA;
2N6508G
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
JANTX2N2324S
New England Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Reference Standard: MIL;
C106D1
Loras Industries
BT152-600R,127
Ween Semiconductors
B614FSE-2T
Crydom
The Crydom B614FSE-2T is a 2-element SCR with max. on-state current of 46A, non-repetitive peak on-state current of 650A, and max. DC gate trigger current of 80mA. Ideal for applications requiring high power control in industrial settings due to its common cathode configuration and isolated case connection.
S4008RTP
S4008RTP by Littelfuse is a single SCR with 15mA DC gate trigger current, 100A non-repetitive peak on-state current, and 5.1A max on-state current. Ideal for applications requiring a silicon-controlled rectifier such as power supplies, motor control, and lighting systems.
2N6508TG
2N6508TG by Onsemi is a single SCR with max. on-state current of 16A, non-repetitive peak on-state current of 250A, and max. DC gate trigger current of 30mA. It is used in applications requiring high power control such as motor drives, lighting controls, and industrial equipment due to its robust design and high operating temperature range from -40°C to 125°C.
MMO110-12IO7
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: ANTI-PARALLEL, 2 ELEMENTS; Case Connection: ISOLATED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TD162N16KOFHPSA2
SCR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
TD160N16SOFHPSA1
TD162N16KOF
Infineon Technologies' TD162N16KOF SCR has a max DC Gate Trigger Current of 150mA, Non Repetitive Peak On-state Current of 4400A, and Max On-state Current of 162A. It is used in applications requiring high current switching capabilities such as industrial power control systems.
TD162N12KOC-A
SCR; Maximum Leakage Current: 30 mA; Maximum DC Gate Trigger Voltage: 2 V; Maximum Holding Current: 200 mA; Maximum On-state Voltage: 1.41 V; Screw Terminals Description: 2K-CA;
TD162N14KOC
SCR; Maximum On-state Voltage: 1.41 V; Maximum On-state Current: 162 A; Minimum Operating Temperature: -40 Cel; Non Repetitive Peak On-state Current: 5200 A; Maximum Operating Temperature: 125 Cel;
TD162N16KOC
SCR; Maximum Leakage Current: 30 mA; Maximum Holding Current: 200 mA; Minimum Operating Temperature: -40 Cel; Maximum DC Gate Trigger Voltage: 2 V; Screw Terminals Description: A-K-AK;
TD162N12KOFHPSA1
TD162N16KOF-A
SCR; Maximum On-state Current: 162 A; Minimum Operating Temperature: -40 Cel; Non Repetitive Peak On-state Current: 4400 A; Repetitive Peak Reverse Voltage: 1600 V; Maximum Operating Temperature: 125 Cel;
TD162N12KOC_TIM
SCR;
TD162N14KOC-A
SCR; Maximum DC Gate Trigger Voltage: 2 V; Maximum Leakage Current: 30 mA; Maximum On-state Current: 162 A; Repetitive Peak Reverse Voltage: 1400 V; Non Repetitive Peak On-state Current: 5200 A;
TD162N14KOF
TD162N12KOF-A
SCR; Maximum Operating Temperature: 125 Cel; Maximum On-state Current: 162 A; Non Repetitive Peak On-state Current: 4400 A; Quick Connects Description: G-GR; Minimum Operating Temperature: -40 Cel;
TD162N16KOC-A
SCR; Minimum Operating Temperature: -40 Cel; Maximum On-state Current: 162 A; Maximum Operating Temperature: 125 Cel; Quick Connects Description: G-GR; Maximum Holding Current: 200 mA;
TD162N12KOC
SCR; Repetitive Peak Reverse Voltage: 1200 V; Maximum Operating Temperature: 125 Cel; Screw Terminals Description: A-K-AK; Maximum DC Gate Trigger Voltage: 2 V; Maximum On-state Current: 162 A;
TD162N14KOF-A
SCR; Screw Terminals Description: 2K-CA; Repetitive Peak Reverse Voltage: 1400 V; Quick Connects Description: G-GR; Maximum Operating Temperature: 125 Cel; Non Repetitive Peak On-state Current: 4400 A;
TD162N12KOF_TIM
TD160N16SOF
TD160N18SOFHPSA1
TD162N12KOF
SCR; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Quick Connects Description: G-GR; Non Repetitive Peak On-state Current: 4400 A; Repetitive Peak Reverse Voltage: 1200 V;
Eupec & Kg
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved