Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF FRONT END CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
ACDS - Activité Composants Distribution Service
Bristol Electronics
Connector Distribution Corp
Right Parts Inc.
Dan-Mar Components
Native Components
$0.168
$0.161
Northwest PG Solutions
$0.185
$0.163
Andel Nordic
$1.090
$1.046
AZTECH Wire
$13.420
Decca Corp
$19.000
$18.620
$18.434
Supply Digital
Authorized Procurement Solutions
Corphita
Cellphone ICs ACFM-7103-BLK attributes and parameters. Explore more Cellphone ICs devices from Broadcom
JESD-30 Code:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Surface Mount:
Telecom IC Type:
Terminal Form:
Terminal Position:
ACFM-7103-BLK Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 19/Jan/2016
PCN Assembly/Origin - Multiple Devices 31/May/2013
PCN Packaging - Alternate ESD Lock Reel Supplier 24/Jul/2014
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
Kec
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Littelfuse
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
MAX19997AETX+T
MAX19997AETX+T by Analog Devices is a Cellphone IC with 36 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85 °C, suitable for industrial use. It features BICMOS technology and serves as an RF front end circuit for telecom applications.
ADL5812ACPZ-R7
ADL5812ACPZ-R7 by Analog Devices is a 40-terminal cellphone IC with BICMOS technology. It operates b/w -40 to 85°C, has a package style of CHIP CARRIER, and requires a nominal voltage of 5V. This RF and baseband circuit is ideal for telecom applications due to its compact square shape and low profile design.
TLV320AC56CDW
TLV320AC56CDW by Texas Instruments is a 20-terminal cellphone IC with 3V supply voltage. It features a 13-bit linear coding, mu-law companding law, and filter for baseband circuits. This CMOS technology IC operates b/w 0 to 70°C, making it ideal for commercial telecom applications.
LMH2121TME
RF AND BASEBAND CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
HMC687LP4
Analog Devices' HMC687LP4 is a BICMOS technology Cellphone IC with 24 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
TCM320AC56IN
TCM320AC56IN by Texas Instruments is a 20-terminal IC for cellphones. It operates at temperatures from -40 to 85°C, with a supply voltage of 5V. Featuring companding law MU-LAW and a filter, it is ideal for baseband circuit applications in the telecom industry.
AD8341ACP
AD8341ACP by Analog Devices is a cellphone IC with 24 terminals in a square package. It operates at -40 to 85 °C, with a supply voltage of 5V. This RF and baseband circuit technology is ideal for telecom applications.
TLV321AC37CPT
TLV321AC37CPT by Texas Instruments is a 48-terminal cellphone IC with CMOS technology. It operates b/w 0-70°C, has a nominal voltage of 3V, and features a low-profile flatpack package style. Ideal for baseband circuits in telecom applications due to its fine pitch and gull wing terminal form.
MAX2674EWT+T
MAX2674EWT+T by Analog Devices is a Cellphone IC with BICMOS tech, 3.3V supply voltage, and RF/Baseband circuit type. It has a temp range of -40 to 85°C, package style GRID ARRAY, and terminal finish of TIN SILVER COPPER NICKEL. Ideal for telecom applications requiring high performance in a compact form factor.
MAX2550ETN+
Analog Devices' MAX2550ETN+ is a cellphone IC with 56 terminals in a square chip carrier package. Operating b/w -40 °C to 85°C, it has a supply voltage of 3.3V and max current of 390mA. Ideal for RF and baseband circuits, this IC features a terminal pitch of 0.4mm and is suitable for industrial temperature grade applications.
AD6635XBC
AD6635XBC by Analog Devices is a Cellphone IC with 324 terminals in a GRID ARRAY package. Operating temperature ranges from -40 to 70 °C, with power supplies of 2.5V and 3.3V. This CMOS technology BASEBAND CIRCUIT is ideal for cellphone applications due to its compact SQUARE shape and BALL terminal form.
LMV228URX
LMV228URX by Texas Instruments is a cellphone IC with a package style of grid array, very thin profile, and fine pitch. It operates in industrial temperature grades from -40 to 85°C and has a nominal voltage of 2.7V. This RF and baseband circuit IC is designed for telecom applications requiring precise performance in compact spaces.
AD6636BBC
AD6636BBC by Analog Devices is a Cellphone IC with 256 terminals in a GRID ARRAY package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 1.8V, making it ideal for cellphone applications.
AD6655ABCPZRL7-150
AD6655ABCPZRL7-150 by Analog Devices is a cellphone IC with 64 terminals, operating at -40 to 85 °C. It has a supply voltage of 1.8V and consumes 0.805mA current. This BASEBAND CIRCUIT IC comes in a SQUARE package style, suitable for telecom applications.
SARA-R410M-02B-03
U-blox Ag
SARA-R410M-02B-03 by U-blox Ag is a surface mount Cellphone IC with 96 terminals. Telecom IC type includes RF and baseband circuit, operating at -20 to 65°C. Nominal voltage of 3.8V makes it ideal for commercial applications requiring compact design and high performance.
TRF37T05IRGET
TRF37T05IRGET by Texas Instruments is a cellphone IC with 24 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Telecom IC type for RF and baseband circuits, with nominal voltage of 3.3V.
ME310G1WW04T050400
Telit Communications Plc
Telit ME310G1WW04T050400 is a compact CELL IC with 94 terminals, ideal for RF & baseband circuits. Operates b/w -40°C to 85°C, with a nominal voltage of 3.8V. Its MICROELECTRONIC ASSEMBLY package makes it suitable for various cellphone applications.
AT86RF233-ZF
Microchip Technology
AT86RF233-ZF by Microchip is a cellphone IC with 32 terminals in a square chip carrier package. Operating temperature ranges from -40 to 125°C, suitable for automotive applications. It features RF and baseband circuitry, CMOS technology, and a nominal voltage of 3V.
MC13142D
MC13142D by NXP Semiconductors is a cellphone IC with 16 terminals, operating temperature range of -40 to 85°C. It features RF and baseband circuit for telecom applications. The small outline package style with gull wing terminals makes it suitable for industrial-grade usage.
LMH6522SQ
Texas Instruments LMH6522SQ is a 54-terminal cellphone IC with RF and baseband circuit. Operating b/w -40 to 85°C, it has a nominal voltage of 5V. This surface-mount chip carrier is ideal for telecom applications due to its compact size and industrial temperature grade.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACFM-7101-BLKG
Broadcom
BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: UNSPECIFIED; No. of Terminals: 6; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
ACFM-7101-TR1G
ACFM-7102-BLK
BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: UNSPECIFIED; No. of Terminals: 6; Package Shape: RECTANGULAR; Qualification: Not Qualified;
ACFM-7102-TR1
ACFM-7103-TR1
RF FRONT END CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 7; Package Shape: RECTANGULAR; Terminal Position: DUAL; JESD-30 Code: R-XDMA-N7;
ACFM-7104-BLK
RF AND BASEBAND CIRCUIT; Temperature Grade: OTHER; Terminal Form: UNSPECIFIED; No. of Terminals: 7; Package Shape: RECTANGULAR; Terminal Position: UNSPECIFIED;
ACFM-7104-TR1
RF AND BASEBAND CIRCUIT; Temperature Grade: OTHER; Terminal Form: UNSPECIFIED; No. of Terminals: 7; Package Shape: RECTANGULAR; Length: 7 mm;
ACFM-7107-BLK
RF FRONT END CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 5; Package Shape: RECTANGULAR; Width: 4 mm;
ACFM-7107-TR1
ACFM-7109-BLK
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 5; Package Code: QCCN; Package Shape: RECTANGULAR;
ACFM-7109-TR1
ACFM-7110-BLK
ACFM-7110-TR1
ACFM-7325-BLK
ACFM-7325-TR1
ACFM-9025-BLK
BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 5; Package Shape: RECTANGULAR; Length: 7 mm;
ACFM-9025-TR1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved