Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns MF-MSMF110-2 is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style. Ideal for surface mounting with gold over nickel finish, it meets CUL, TUV, and UL standards.
Median Price
$0.257
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.160
100+ parts
-
1k+ parts
10k+ parts
$0.144
Bürklin Elektronik
$0.360
$0.300
$0.280
$0.260
Master Electronics
$0.221
$0.207
Verical
$0.284
$0.253
TTI Europe
$0.123
Arrow
$0.140
Chip1Stop
Element14
$0.254
$0.251
Farnell
$0.283
$0.278
$0.272
Newark
$0.473
$0.275
$0.264
PEI Genesis
TME
$0.210
Nova Conductors
Bristol Electronics
$0.337
$0.168
$0.067
$0.042
Dan-Mar Components
ComSIT Distribution GmbH
Electro Sonic
$0.132
IBS Electronics
$0.311
$0.291
ACDS - Activité Composants Distribution Service
Vyrian
NAC Semi
$0.182
DF Sales Co.
Rapid Electronics
$0.277
Rebound Electronics
QIE Inc.
Avant Electronics Limited
LIBRA Elektronik GmbH
Classic Components Corporation
Speed Components Ltd
Corohmni
$0.058
Semicontronic
$0.098
$0.096
$0.095
Aztec Data Supply Inc.
$0.130
Argo Parts USA
Perfect Parts
Eastek
$0.170
Authorized Procurement Solutions
GreenTree Electronics
Assy Fe
Futuretech Components
Glotronic Ltd.
Abacus Technologies
Continental Prestige Electronics
$0.218
$0.216
$0.212
S.R.D Solutions
EMSNET (Excess)
Infinite Electronics LLP (Excess)
Computer Components Inc. - USA
Kepictronics
Cyclops Electronics Ltd (Excess)
Provides protection against overcurrent situations, ensuring the safety and longevity of the device.
Low resistance allows for efficient flow of current through the device.
Can withstand high temperatures, making it suitable for a variety of environments and applications.
Withstands low temperatures, ensuring functionality even in extreme conditions.
Provides a durable and reliable terminal finish for secure connections.
Utilizes PTC technology for automatically resetting the fuse after it has tripped, allowing for continued protection.
Optimal operating voltage for various electronic systems and devices.
Easy and convenient mounting option for efficient installation.
Non-linear Resistors MF-MSMF110-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
MF-MSMF110-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Design/Specification - MF Cert Mark Aug/2015
PCN Assembly/Origin - MF-yyyF, MF-xSMF Series May/2014
PCN Packaging - MF-MSMF Series Reel Color Jan/2011 MF-MSMF,SMDF Series TR Dec/2009
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2920L030DR
Littelfuse
2920L030DR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. This thermistor has dimensions of 7.98mm x 5.44mm x 1.25mm and operates b/w -40°C to 85°C.
PFMF.020.2
Schurter Ag
Schurter Ag's PFMF.020.2 is a PTC resettable fuse with resistance of 0.4 ohm, rated AC voltage of 30V, and operating temperature range from -40 to 85 °C. It is used for temperature sensing applications in surface mount installations with dual-ended terminals and wraparound shape.
NTC0805J5K0
TE Connectivity
TE Connectivity's NTC0805J5K0 is a 5000 ohm NTC thermistor with 5% tolerance. It operates b/w -55°C to 125°C, offering high thermal sensitivity index of 3450 K. Ideal for temperature sensing applications, this surface mount device comes in a rectangular package with dual-ended terminals.
TFPT1206L6201JV
Vishay Intertechnology
Vishay Intertechnology's TFPT1206L6201JV is a PTC thermistor with 6200 ohm resistance, 5% tolerance, and 0.125 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and rectangular package shape. Operating temperature ranges from -55°C to 150°C making it suitable for diverse environments.
MF-R050-2-17
Bourns
The Bourns MF-R050-2-17 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and max temp of 85°C. It's used for overcurrent protection in applications requiring radial terminal placement and matte tin finish. Ideal for CUL, TUV, UL reference standards.
MF-PSMF035X-2
The Bourns MF-PSMF035X-2 is a PTC resettable fuse with resistance of 0.25 ohm, suitable for overcurrent protection. It features dual-ended terminals in a rectangular SMT package, with gold (Au) finish and nickel (Ni) barrier. Operating temperature ranges from -40 to 85 °C, making it ideal for various electronic applications.
EZJZ0V220HA
The Panasonic EZJZ0V220HA is a VARISTOR resistor with dual-ended terminals, suitable for surface mount applications. It has a max operating temperature of 85°C and can handle an operating voltage of 13V. With a rectangular package style and wraparound terminals, it is ideal for circuit protection in various electronic devices.
B57471V2103J062
TDK
B57471V2103J062 by TDK is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 0.21 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 4455 K and operating temperature range from -55 °C to 125 °C. The thermistor comes in a rectangular SMT package with dual-ended terminals for surface mounting.
0805L010YR
0805L010YR by Littelfuse is a PTC resettable fuse with 1 ohm resistance, dual-ended terminals, and SMT package style. It is used for overcurrent protection in various applications. With dimensions of 2.2mm x 1.5mm x 1mm and operating voltage up to 15V, it ensures reliable performance in a compact form factor.
PTCCL05H390HBE
Vishay Intertechnology's PTCCL05H390HBE is a PTC thermistor with 260 ohm resistance, rated for 265V AC voltage. Ideal for overload protection applications, it has radial terminal placement and disk package shape. Operating temperature ranges from -25°C to 125°C, with matte tin over nickel terminal finish.
PS103J2
Us Sensor
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .03 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %;
PESD0402-240
PESD0402-240 by Littelfuse is a VARISTOR with 24V operating voltage, METAL GLAZE/THICK FILM tech, and DUAL ENDED terminal placement. Ideal for surge protection in automotive electronics due to AEC-Q200 compliance and compact SMT package (0.6mm x 1.1mm x 0.43mm).
GA10K3A1IA
TE Connectivity's GA10K3A1IA is a non-linear resistor with 2 terminals, operating from -40 to 125°C. With a length of 76mm, it is ideal for temperature sensing applications.
PESD0402-140
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Packing Method: BULK; TR, 7 INCH; Width (Package): .6 mm; Operating Voltage: 14 V;
MINISMDC075F/24
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; No. of Terminals: 2;
NB20N50104JBA
KYOCERA AVX
NB20N50104JBA by KYOCERA AVX is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.24 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 4160 K and operating temperature range from -55 to 150 °C. The dual-ended terminal placement and SMT package style make it suitable for surface mount installations.
RXEF110-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: TR; Rated AC Voltage (URac): 72 V; Thermistor Application: TEMPERATURE SENSING;
TO103J2F
TO103J2F by Littelfuse is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3892 K. It is used for temperature sensing applications with a rated temperature range from -55°C to 150°C. The thermistor has radial terminal placement and through-hole mounting type.
B57237-S109-M
B57237-S109-M by TDK is a NTC thermistor with 1 ohm resistance, rated for 265V AC voltage. It has a thermal sensitivity index of 2700 K and can operate b/w -55°C to 170°C. This radial terminal thermistor is ideal for soft start applications due to its high power dissipation of 3.1W in disk package.
B59701-A90-A62
TDK's B59701-A90-A62 is a PTC thermistor with 1000 ohm resistance, 5% tolerance, and rated AC voltage of 25V. It is used for temperature sensing applications with a max operating temperature of 125°C and min of -40°C. The dual-ended rectangular package has wraparound terminals and surface mounting type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-MSMF075/24-2
The Bourns MF-MSMF075/24-2 is a PTC resettable fuse with resistance of 0.11 ohm, operating voltage of 24V, and max temp of 85°C. It is used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style.
MF-MSMF050-2
The Bourns MF-MSMF050-2 is a PTC resettable fuse with resistance of 0.15 ohm and operating voltage of 15V. It is used for overcurrent protection in automotive applications, featuring dual-ended terminals and surface mounting type. AEC-Q200, CUL, TUV, and UL standards are met by this SMT package with gold over nickel terminal finish.
MF-MSMF110/24X-2
The Bourns MF-MSMF110/24X-2 is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
MF-MSMF030-2
The Bourns MF-MSMF030-2 is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 30V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
MF-MSMF020/60-2
The Bourns MF-MSMF020/60-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminals, SMT package style, and gold over nickel terminal finish. Operating temperature ranges from -40°C to 85°C.
MF-MSMF010-2
Bourns MF-MSMF010-2 is a PTC resettable fuse with 0.7 ohm resistance, 60V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in automotive applications due to AEC-Q200 compliance and -40 to 85°C operating temperature range. SMT package style with gold over nickel terminal finish ensures reliable surface mount installation.
MF-MSMF020-2
The Bourns MF-MSMF020-2 is a PTC resettable fuse with a resistance of 0.4 ohm and an operating voltage of 30V. It is commonly used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mount mounting type.
MF-MSMF014-2
The Bourns MF-MSMF014-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style. With AEC-Q200, CUL, TUV, and UL certifications, it ensures reliable performance from -40 to 85°C.
MF-MSMF150/24X-2
Bourns MF-MSMF150/24X-2 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 24V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
MF-MSMF110/16-2
The Bourns MF-MSMF110/16-2 is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 16V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style for surface mounting. The device has a temperature range from -40°C to 85°C and meets standards like AEC-Q200, CUL, TUV, and UL.
MF-MSMF250/16X-2
Bourns MF-MSMF250/16X-2 is a PTC resettable fuse with resistance of 0.015 ohm, operating voltage of 16V, and dual-ended terminals. Ideal for overcurrent protection in SMT applications, it has a temperature range from -40 to 85 °C and meets AEC-Q200, CUL, TUV, and UL standards.
MF-MSHT110KX-2
Bourns MF-MSHT110KX-2 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 16V, and max temperature of 125°C. It is used for overcurrent protection in various applications such as automotive electronics and power supplies.
MF-MSMF050/40X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Width (Package): 3.41 mm;
MF-MSHT150KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .022 ohm; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: RMIN AT 23 DEG CEL;
MF-MSMF110/24X
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERLOAD PROTECTION; Manufacturer Series: MF-MSMF; Additional Features: RESISTANCE MIN IS 0.06 OHMS AT 23 DEG CEL;
MF-MSMF200-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Reference Standard: CUL; TUV; UL;
MF-MSMF050/30X-2
Bourns MF-MSMF050/30X-2 is a PTC resettable fuse with 0.15 ohm resistance, 30V operating voltage, and dual-ended terminals. It is used for overcurrent protection in SMT applications with AEC-Q200, CUL, TUV, and UL certifications.
MF-MSMF260-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 4.73 mm;
MF-MSMF075-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Length (Package): 4.73 mm;
MF-MSMF160-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .035 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Additional Features: RMIN AT 23 DEG CEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved