Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns MF-MSMF030-2 is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 30V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
Median Price
$0.202
Lifecycle Status
Suppliers In-Stock
47
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.180
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$0.316
$0.305
$0.283
RS Americas
$0.329
$0.280
Mouser Electronics
$0.390
$0.222
$0.166
$0.150
Bürklin Elektronik
$0.400
$0.330
$0.310
$0.290
TTI Europe
$0.139
Arrow
$0.129
Verical
DigiKey
$0.134
Future Electronics
$0.088
Newark
$0.718
$0.306
$0.294
Master Electronics
$0.131
Element14
$0.430
$0.419
$0.408
TTI
$0.138
Farnell
$0.325
$0.258
Chip1Stop
$0.223
TME
$0.240
$0.171
Nova Conductors
$0.254
Maritex
$0.328
$0.185
$0.158
$0.157
Mobius Materials
$0.270
Cyclops Electronics Ltd
Chip Stock
NAC Semi
$0.206
Vyrian
IBS Electronics
$0.303
$0.276
Electro Sonic
BCID Electronics Ltd.
ComSIT Distribution GmbH
Bristol Electronics
Diverse Electronics
Sensible Micro Corp
LIBRA Elektronik GmbH
Atlantic Semiconductor
ACDS - Activité Composants Distribution Service
ComSIT USA
Prism Electronics
Mil-Aero Solutions, Inc.
Next Level Components, LLC
Connector Distribution Corp
Right Parts Inc.
Sunrise Surplus Inc.
Semi Source
Elcom Components
Flex Direct, LLC
Martec Srl
A2Z Electronics, Inc.
Semtec, LLC
Corohmni
$0.030
Aztec Data Supply Inc.
$0.035
Decca Corp
$0.094
$0.092
$0.091
Semicontronic
Continental Prestige Electronics
$0.244
$0.120
$0.103
Argo Parts USA
$0.247
Netroflash
$0.242
$0.237
Advanced Electronics
$0.381
$0.362
Perfect Parts
GreenTree Electronics
Eastek
$0.020
Abacus Technologies
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
S.R.D Solutions
Kepictronics
EMSNET (Excess)
Standard Data Resources (Excess)
Futuretech Components
Robosynatics
Lucentia Tech
Allen Electronics Distributors
Provides protection against overcurrent situations, making the product reliable and safe to use.
Dual ended terminals allow for easy installation and connection, enhancing the usability of the product.
TR packing method ensures efficient storage and handling of the product, making it convenient for bulk orders.
Low resistance value helps in efficient current limiting and protection, making it suitable for overcurrent protection applications.
High maximum operating temperature ensures the product can perform reliably in various environments without overheating.
Gold over nickel terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term performance of the product.
PTC resettable fuse resistor type offers self-recovering protection, reducing maintenance and replacement costs.
Operating voltage of 30 V is suitable for a wide range of applications, providing flexibility and versatility.
Surface mounting type allows for easy and secure installation on PCBs, saving space and facilitating assembly.
Compliance with reputable standards ensures the product meets quality and safety requirements, giving peace of mind to users.
Non-linear Resistors MF-MSMF030-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
MF-MSMF030-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Design/Specification - MF Cert Mark Aug/2015
PCN Assembly/Origin - MF-yyyF, MF-xSMF Series May/2014
PCN Packaging - MF-MSMF Series Reel Color Jan/2011 MF-MSMF,SMDF Series TR Dec/2009
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Components
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Micro Commercial Components
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
1554216004
Molex
WIRE AND CABLE;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bytesonic Electronics
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
SPC TECHNOLOGY/ MULTICOMP
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
B57232V5103F360
TDK
B57232V5103F360 by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3455 K thermal sensitivity index. It is used for temperature compensation in various applications due to its dual-ended terminal placement and surface mounting type. The thermistor operates b/w -40°C to 150°C, making it suitable for diverse environments.
PRG18BB101MB1RB
Murata Manufacturing
Murata Manufacturing's PRG18BB101MB1RB is a PTC resettable fuse with 100 ohm resistance, rated for 24V AC. It features dual-ended terminals in a rectangular SMT package, ideal for overcurrent protection applications. With operating temperatures from -20°C to 75°C, it meets CUL and UL standards for reliability.
B72220S0421K101
The TDK B72220S0421K101 is a VARISTOR with 175J energy capacity, 420V RMS voltage, and 560V operating voltage. Ideal for surge protection in applications requiring high energy absorption like power supplies and industrial equipment. With radial terminal placement and metal oxide technology, it ensures reliable performance in a compact disk package.
PFRA.110
Schurter Ag
Schurter Ag's PFRA.110 is a PTC resettable fuse with resistance of 0.1 ohm and rated AC voltage of 40V. Its cylindrical package, radial terminal placement, and through hole mounting make it ideal for overcurrent protection in various electronic applications.
RUEF110-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .17 ohm; Rated Power Dissipation (P): .7 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin/Copper (Sn/Cu);
RXEF185-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Rated AC Voltage (URac): 72 V; Terminal Placement: RADIAL;
SG200
Ketema Rodan Division
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 65 Cel; Rated AC Voltage (URac): 265 V; Thermal Sensitivity Index: 3000 K;
V82ZA20PX10
Littelfuse V82ZA20PX10 varistor has a rated temp of 85°C, max operating temp of 125°C, and min operating temp of -55°C. It is a metal oxide film technology varistor with radial terminal placement for surge protection applications.
MF-FSMF050X-2
Bourns
Bourns MF-FSMF050X-2 is a PTC resettable fuse with resistance of 0.1 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold finish.
MICROSMD005F-2
TE Connectivity
TE Connectivity's MICROSMD005F-2 is a PTC resettable fuse with dual-ended terminals, suitable for temperature sensing applications. With a max operating temperature of 85°C and operating voltage of 30V, this surface mount device comes in a compact rectangular package measuring 3.2mm x 2.5mm x 0.85mm. It meets reference standards such as CSA, TUV, and UL for reliable performance in various electronic circuits.
RXEF185K-AP
TE Connectivity's RXEF185K-AP is a PTC resettable fuse with resistance of 0.19 ohm and rated power dissipation of 2.1W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating voltage is 72V with dimensions of 16.76mm x 3mm x 23mm, suitable for through hole mounting in various industries.
B59980-C80-A70
Siemens
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25 ohm; Rated AC Voltage (URac): 80 V; Thermistor Application: OVERLOAD PROTECTION; Shape (Package): DISK PACKAGE;
RF1351-000
TE Connectivity's RF1351-000 is a PTC resettable fuse with dual-ended terminals and matte tin over nickel finish. With a rated AC voltage of 30V and max operating temperature of 85°C, it is ideal for surface mount applications requiring protection against overcurrent events.
MF-MSMF014-2
The Bourns MF-MSMF014-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style. With AEC-Q200, CUL, TUV, and UL certifications, it ensures reliable performance from -40 to 85°C.
V100ZA15P
V100ZA15P by Littelfuse is a VARISTOR with 60V max circuit RMS voltage and 20J max energy absorption. Operating at -55 to 125°C, it's ideal for surge protection in various applications like power supplies and industrial equipment. With radial terminal placement and metal oxide film technology, it offers reliable performance in bulk packaging.
NANOSMDC010F-2
NANOSMDC010F-2 by Littelfuse is a PTC resettable fuse with 1.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type. The device has a compact SMT package style, making it suitable for space-constrained designs.
RXEF185K-2
TE Connectivity's RXEF185K-2 is a PTC resettable fuse with resistance of 0.19 ohm and rated power dissipation of 2.1W. Ideal for temperature sensing applications, it operates at temperatures ranging from -40 to 85°C with a max AC voltage of 72V. Its radial terminal placement and disk package shape make it suitable for through-hole mounting in various electronic devices.
E46226-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 100 V; No. of Terminals: 2;
B72650-M271-K72
The TDK B72650-M271-K72 is a VARISTOR with 8.6J energy capacity, 275V RMS voltage, and -40 to 85°C operating range. It has dual terminals in a rectangular package for surface mount applications in electronics protection circuits.
NTCS0402E3103FLT
Vishay Intertechnology
Vishay Intertechnology's NTCS0402E3103FLT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3490 K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package for surface mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-MSMF075/24-2
The Bourns MF-MSMF075/24-2 is a PTC resettable fuse with resistance of 0.11 ohm, operating voltage of 24V, and max temp of 85°C. It is used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style.
MF-MSMF050-2
The Bourns MF-MSMF050-2 is a PTC resettable fuse with resistance of 0.15 ohm and operating voltage of 15V. It is used for overcurrent protection in automotive applications, featuring dual-ended terminals and surface mounting type. AEC-Q200, CUL, TUV, and UL standards are met by this SMT package with gold over nickel terminal finish.
MF-MSMF110/24X-2
The Bourns MF-MSMF110/24X-2 is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
MF-MSMF020/60-2
The Bourns MF-MSMF020/60-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminals, SMT package style, and gold over nickel terminal finish. Operating temperature ranges from -40°C to 85°C.
MF-MSMF010-2
Bourns MF-MSMF010-2 is a PTC resettable fuse with 0.7 ohm resistance, 60V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in automotive applications due to AEC-Q200 compliance and -40 to 85°C operating temperature range. SMT package style with gold over nickel terminal finish ensures reliable surface mount installation.
MF-MSMF020-2
The Bourns MF-MSMF020-2 is a PTC resettable fuse with a resistance of 0.4 ohm and an operating voltage of 30V. It is commonly used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mount mounting type.
MF-MSMF150/24X-2
Bourns MF-MSMF150/24X-2 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 24V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
MF-MSMF110/16-2
The Bourns MF-MSMF110/16-2 is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 16V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style for surface mounting. The device has a temperature range from -40°C to 85°C and meets standards like AEC-Q200, CUL, TUV, and UL.
MF-MSMF250/16X-2
Bourns MF-MSMF250/16X-2 is a PTC resettable fuse with resistance of 0.015 ohm, operating voltage of 16V, and dual-ended terminals. Ideal for overcurrent protection in SMT applications, it has a temperature range from -40 to 85 °C and meets AEC-Q200, CUL, TUV, and UL standards.
MF-MSHT110KX-2
Bourns MF-MSHT110KX-2 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 16V, and max temperature of 125°C. It is used for overcurrent protection in various applications such as automotive electronics and power supplies.
MF-MSMF110-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Reference Standard: CUL; TUV; UL;
MF-MSMF050/40X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Width (Package): 3.41 mm;
MF-MSHT150KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .022 ohm; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: RMIN AT 23 DEG CEL;
MF-MSMF110/24X
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERLOAD PROTECTION; Manufacturer Series: MF-MSMF; Additional Features: RESISTANCE MIN IS 0.06 OHMS AT 23 DEG CEL;
MF-MSMF200-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Reference Standard: CUL; TUV; UL;
MF-MSMF050/30X-2
Bourns MF-MSMF050/30X-2 is a PTC resettable fuse with 0.15 ohm resistance, 30V operating voltage, and dual-ended terminals. It is used for overcurrent protection in SMT applications with AEC-Q200, CUL, TUV, and UL certifications.
MF-MSMF260-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 4.73 mm;
MF-MSMF075-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Length (Package): 4.73 mm;
MF-MSMF075/33X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: AEC-Q200; CUL; UL; Width (Package): 3.41 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved