Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns MF-MSMF110/16-2 is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 16V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style for surface mounting. The device has a temperature range from -40°C to 85°C and meets standards like AEC-Q200, CUL, TUV, and UL.
Median Price
$0.289
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.410
100+ parts
$0.266
1k+ parts
$0.200
10k+ parts
$0.178
Bürklin Elektronik
$0.440
$0.370
$0.350
$0.320
DigiKey
$0.490
$0.288
$0.220
-
Newark
$0.549
Arrow
$0.183
Verical
$0.184
TTI Europe
$0.170
Master Electronics
$0.179
Avnet
Farnell
$0.368
$0.349
$0.329
Element14
$0.407
$0.374
$0.340
TTI
Chip1Stop
$0.257
$0.245
Nova Conductors
$0.259
TME
Chip Stock
NAC Semi
$0.264
Martec Srl
Electro Sonic
$0.167
IBS Electronics
$0.343
$0.336
Vyrian
A2Z Electronics, Inc.
Cyclops Electronics Ltd
ComSIT Distribution GmbH
ComSIT USA
Inventory MP
Bristol Electronics
LIBRA Elektronik GmbH
Global Solutions Electronics Company
ACDS - Activité Composants Distribution Service
Rapid Electronics
$0.313
Prism Electronics
Goldney Electronics S.L.
Florida Circuit
Connector Distribution Corp
Right Parts Inc.
Holdelec - ElecDif-Pro
Sensible Micro Corp
Elcom Components
Advanced Electronics
$0.055
$0.052
Aztec Data Supply Inc.
$0.221
Argo Parts USA
$0.243
$0.236
Netroflash
$0.246
$0.241
Semicontronic
$0.261
$0.254
$0.253
Corohmni
Perfect Parts
Abacus Technologies
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
$0.272
$0.247
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
Kepictronics
XScomponents
This feature ensures that the product can effectively protect against overcurrent situations, making it a reliable choice for applications where overcurrent protection is crucial.
Having dual-ended terminal placement allows for flexibility in installation and connection options, making it easier to integrate into different systems.
The TR packing method in 7-inch reels enables efficient handling and storage of the product, making it convenient for bulk production and assembly processes.
With a low resistance value, this product offers efficient current flow and helps in minimizing power losses, making it energy-efficient.
The high operating voltage of 16 V allows the product to handle higher voltage levels safely, making it suitable for a wide range of applications.
The SMT package style enables surface mounting, which simplifies the assembly process and saves space, making it suitable for compact designs.
The high maximum operating temperature of 85°C ensures the product can withstand elevated temperatures without performance degradation, increasing its reliability in various environments.
Compliance with multiple standards such as AEC-Q200, CUL, TUV, and UL guarantees the quality and safety of the product, making it a trustworthy choice for diverse applications.
Non-linear Resistors MF-MSMF110/16-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
MF-MSMF110/16-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Design/Specification - MF Cert Mark Aug/2015
PCN Assembly/Origin - MF-yyyF, MF-xSMF Series May/2014
PCN Packaging - MF-MSMF Series Reel Color Jan/2011
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
MINISMDC110F/24-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; Height (Package): 1.46 mm;
NTCS0805E3472FMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
SG200
Ketema Rodan Division
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 65 Cel; Rated AC Voltage (URac): 265 V; Thermal Sensitivity Index: 3000 K;
1206L010/60WR
Littelfuse 1206L010/60WR is a PTC resettable fuse with resistance of 1.5 ohm and operating voltage of 60V. It features dual-ended terminals, SMT package style, and matte tin finish. Ideal for overcurrent protection applications with temperature range from -40 to 85°C.
B59451C1130B070
TDK
The TDK B59451C1130B070 is a PTC thermistor with 56 ohm resistance and 440V operating voltage. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With AEC-Q200 reference standard, it offers -40 to 125 °C operating temperature range.
MF-MSMF110-2
Bourns
The Bourns MF-MSMF110-2 is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style. Ideal for surface mounting with gold over nickel finish, it meets CUL, TUV, and UL standards.
RUEF900K-2
PTC RESETTABLE FUSE; Manufacturer Series: RUEF;
RXEF250-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Packing Method: AMMO PACK; Thermistor Application: TEMPERATURE SENSING;
LVR100S-240-2
LVR100S-240-2 by Littelfuse is a PTC resettable fuse used for overcurrent protection. It has a resistance of 0.218 ohm and can operate at temperatures ranging from -40 to 85 °C. Its radial terminal placement and through hole mounting make it easy to install in various applications.
RF1403-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Terminal Finish: MATTE TIN OVER NICKEL;
V42MLA1206H
V42MLA1206H by Littelfuse is a VARISTOR with 30V RMS and 42V DC max circuit voltage. It has 0.8J energy capacity, operates b/w -55°C to 125°C, and uses METAL OXIDE FILM tech. Ideal for surge protection in electronics due to its surface mounting type and dual-ended terminal placement.
NTCS0603E3472FHT
Vishay Intertechnology
NTCS0603E3472FHT by Vishay Intertechnology is a NTC thermistor with 4700 ohm resistance, 1% tolerance, and 3830 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its -40 to 150 °C operating range and AEC-Q200, CUL, UL standards compliance.
MINISMDC050F-2
TE Connectivity
MINISMDC050F-2 by TE Connectivity is a PTC thermistor with 1 ohm resistance, operating voltage of 24V, and dual terminal placement. It is used for overload protection in various applications due to its compact rectangular package design and surface mounting type. Operating temperature ranges from -40°C to 85°C making it suitable for UL, CSA, TUV reference standards.
B72220P3301K101
The TDK B72220P3301K101 is a VARISTOR with 305J energy capacity, 385V operating voltage, and 1W power dissipation. It is used for surge protection in circuits with up to 300V RMS voltage. Ideal for applications requiring high transient voltage suppression in radial through-hole mounting setups.
ERTJ0ES104F
Panasonic
Panasonic ERTJ0ES104F is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in various applications due to its SMT package style and thermal sensitivity index of 4390 K. Dual-ended terminals make it suitable for surface mounting methods.
NTC0805J10K
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
GA10K3MBD1
TE Connectivity's GA10K3MBD1 is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a lead length of 56mm, it is ideal for temperature sensing applications.
B57227K0333A001
B57227K0333A001 by TDK is a NTC thermistor with 32762 ohm resistance, 10% tolerance, and 0.2 W power dissipation. It is used for temperature sensing applications with a thermal sensitivity index of 4300 K, rated for -55 to 155 °C operating temperatures in radial terminal placement.
V5.5MLA0603H23
VARISTOR;
RUEF250U-2
The Littelfuse RUEF250U-2 is a PTC resettable fuse with resistance of 0.02 ohm, suitable for overcurrent protection applications. It has a max operating temperature of 85°C and operates at 30V DC/RMS voltage. With radial terminal placement and rectangular package shape, it is designed for through-hole mounting in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-MSMF075/24-2
The Bourns MF-MSMF075/24-2 is a PTC resettable fuse with resistance of 0.11 ohm, operating voltage of 24V, and max temp of 85°C. It is used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style.
MF-MSMF050-2
The Bourns MF-MSMF050-2 is a PTC resettable fuse with resistance of 0.15 ohm and operating voltage of 15V. It is used for overcurrent protection in automotive applications, featuring dual-ended terminals and surface mounting type. AEC-Q200, CUL, TUV, and UL standards are met by this SMT package with gold over nickel terminal finish.
MF-MSMF110/24X-2
The Bourns MF-MSMF110/24X-2 is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
MF-MSMF030-2
The Bourns MF-MSMF030-2 is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 30V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
MF-MSMF020/60-2
The Bourns MF-MSMF020/60-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminals, SMT package style, and gold over nickel terminal finish. Operating temperature ranges from -40°C to 85°C.
MF-MSMF010-2
Bourns MF-MSMF010-2 is a PTC resettable fuse with 0.7 ohm resistance, 60V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in automotive applications due to AEC-Q200 compliance and -40 to 85°C operating temperature range. SMT package style with gold over nickel terminal finish ensures reliable surface mount installation.
MF-MSMF020-2
The Bourns MF-MSMF020-2 is a PTC resettable fuse with a resistance of 0.4 ohm and an operating voltage of 30V. It is commonly used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mount mounting type.
MF-MSMF014-2
The Bourns MF-MSMF014-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style. With AEC-Q200, CUL, TUV, and UL certifications, it ensures reliable performance from -40 to 85°C.
MF-MSMF150/24X-2
Bourns MF-MSMF150/24X-2 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 24V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
MF-MSMF250/16X-2
Bourns MF-MSMF250/16X-2 is a PTC resettable fuse with resistance of 0.015 ohm, operating voltage of 16V, and dual-ended terminals. Ideal for overcurrent protection in SMT applications, it has a temperature range from -40 to 85 °C and meets AEC-Q200, CUL, TUV, and UL standards.
MF-MSHT110KX-2
Bourns MF-MSHT110KX-2 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 16V, and max temperature of 125°C. It is used for overcurrent protection in various applications such as automotive electronics and power supplies.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Reference Standard: CUL; TUV; UL;
MF-MSMF050/40X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Width (Package): 3.41 mm;
MF-MSHT150KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .022 ohm; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: RMIN AT 23 DEG CEL;
MF-MSMF110/24X
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERLOAD PROTECTION; Manufacturer Series: MF-MSMF; Additional Features: RESISTANCE MIN IS 0.06 OHMS AT 23 DEG CEL;
MF-MSMF200-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Reference Standard: CUL; TUV; UL;
MF-MSMF050/30X-2
Bourns MF-MSMF050/30X-2 is a PTC resettable fuse with 0.15 ohm resistance, 30V operating voltage, and dual-ended terminals. It is used for overcurrent protection in SMT applications with AEC-Q200, CUL, TUV, and UL certifications.
MF-MSMF260-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 4.73 mm;
MF-MSMF075-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Length (Package): 4.73 mm;
MF-MSMF150/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .03 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Length (Package): 4.73 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved