Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns MF-MSMF050/30X-2 is a PTC resettable fuse with 0.15 ohm resistance, 30V operating voltage, and dual-ended terminals. It is used for overcurrent protection in SMT applications with AEC-Q200, CUL, TUV, and UL certifications.
Median Price
$0.194
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Newark
1+ parts
$0.511
100+ parts
$0.425
1k+ parts
$0.349
10k+ parts
$0.310
Farnell
$0.517
$0.398
$0.343
-
DigiKey
$0.520
$0.305
$0.233
$0.178
Element14
$0.644
$0.497
$0.447
$0.399
Master Electronics
$0.200
$0.188
Arrow
$0.168
Verical
TTI
TTI Europe
$0.159
Chip1Stop
$0.189
Nova Conductors
$0.400
Chip Stock
Vyrian
Electro Sonic
Aztec Data Supply Inc.
$0.250
Corohmni
$0.366
Continental Prestige Electronics
$0.392
$0.348
Argo Parts USA
$0.388
Advanced Electronics
$0.408
Perfect Parts
Netroflash
$0.380
$0.372
This feature allows the thermistor to protect against overcurrent situations, making it ideal for applications where this is a concern.
Dual ended terminal placement provides flexibility in circuit design and installation, making this thermistor suitable for a variety of applications.
The TR packing method in a 7-inch reel ensures easy handling and storage, making this thermistor convenient for mass production.
With a low resistance of 0.15 ohm, this thermistor offers efficient current limiting and overcurrent protection in circuits.
Having 2 terminals simplifies the connection process, making this thermistor user-friendly for both experienced technicians and beginners.
The Surface Mount Technology (SMT) package style makes this thermistor suitable for automated assembly processes, saving time and cost in production.
The wraparound terminal shape ensures secure connections, reducing the risk of loose connections or intermittent faults in the circuit.
With a high maximum operating temperature of 85°C, this thermistor can withstand elevated temperatures without performance degradation.
The low minimum operating temperature of -40°C allows this thermistor to function effectively in cold environments or during temperature fluctuations.
The gold over nickel terminal finish provides excellent conductivity and corrosion resistance, enhancing the reliability and longevity of the thermistor.
The compact height of 0.85 mm makes this thermistor suitable for space-constrained applications without compromising performance.
As a PTC resettable fuse, this thermistor offers self-recovery capability after tripping, ensuring continuous protection in case of faults.
With a maximum operating voltage of 30 volts, this thermistor is suitable for applications requiring voltage regulation and protection.
The length of 4.83 mm ensures compatibility with standard mounting configurations, making this thermistor easy to integrate into various designs.
The surface mounting type simplifies the installation process and improves space efficiency, making this thermistor ideal for modern electronic devices.
Compliant with industry standards such as AEC-Q200, CUL, TUV, and UL, this thermistor meets quality and safety requirements for reliable performance.
The width of 3.41 mm offers a compact form factor, making this thermistor suitable for densely packed circuit layouts without sacrificing functionality.
Non-linear Resistors MF-MSMF050/30X-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
MF-MSMF050/30X-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Bkc Semiconductors
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
National Semiconductor
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
Eic Semiconductor
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
B72214S1300K102
TDK
The TDK B72214S1300K102 is a VARISTOR with 9J energy capacity, 30V RMS voltage, and -40 to 85°C operating range. Ideal for surge protection in circuits with 34V operating voltage. RADIAL package style makes it suitable for THROUGH HOLE MOUNT applications.
1210L010WR
Littelfuse
1210L010WR by Littelfuse is a PTC resettable fuse with 1.6 ohm resistance, suitable for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with matte tin finish and operating voltage of 30V. This surface-mount device has a temperature range from -40 to 85°C and meets CUL, TUV, and UL standards.
311P18-07S7R6
TE Connectivity
TE Connectivity's 311P18-07S7R6 is a NTC thermistor with a resistance of 10000 ohm. It has a rated temperature range of -55 to 90 °C and is used for temperature sensing applications. Its radial terminal placement and through hole mounting make it easy to install.
ASMD100F-2
TE Connectivity's ASMD100F-2 is a PTC resettable fuse with 0.098 ohm resistance, 30V operating voltage, and -40 to 85°C temperature range. It features dual-ended terminals for overcurrent protection in surface mount applications. AEC-Q200 and TS 16949 compliant, it offers reliable circuit protection in compact SMT packages.
RXEF020-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Terminal Shape: WIRE; Minimum Operating Temperature: -40 Cel;
ERTJ0EV104F
Panasonic
ERTJ0EV104F by Panasonic is a non-linear resistor with a resistance of 100000 ohm and a tolerance of 1%. It is used for temperature compensation, with a rated temperature range of -40 to 125 °C.
B72210-S301-K101
The TDK B72210-S301-K101 is a VARISTOR with 47J energy capacity, 385V operating voltage, and -40 to 85°C temperature range. It has RADIAL terminals and DISK PACKAGE shape, suitable for surge protection in various electronic circuits.
NTCLE100E3104JB0A
Vishay Intertechnology
Vishay Intertechnology's NTCLE100E3104JB0A is a 100000 ohm NTC thermistor with thermal sensitivity index of 4190 K. It has a rated temperature range from -40 to 125 °C and is ideal for temperature sensing applications. The thermistor features radial terminal placement, matte tin finish, and through hole mounting method.
NANOSMDC012F-2
TE Connectivity's NANOSMDC012F-2 is a PTC thermistor with dual-ended terminals and rectangular package. It is designed for overload protection applications, featuring surface mounting type and one surface terminal shape.
RF1180-000
TE Connectivity's RF1180-000 is a PTC resettable fuse with 0.04 ohm resistance and 24V operating voltage. It features dual-ended terminals, SMT package style, and WRAPAROUND shape. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and rated power dissipation of 1W.
B72214-S300-K101
TDK B72214-S300-K101 varistor with 30V URac, 9J energy absorption, and -40 to 85°C temp range. Ideal for surge protection in circuits due to its metal oxide film technology and radial package shape. Suitable for applications requiring high voltage tolerance and through-hole mounting.
PESD0603-240
TE Connectivity's PESD0603-240 is a VARISTOR with 24V operating voltage. It comes in a RECTANGULAR PACKAGE measuring 1.7mm x 0.95mm x 0.55mm, suitable for SURFACE MOUNT applications. With a temperature range of -55°C to 125°C, it offers protection against overvoltage in electronic circuits.
NTCS0603E3103HMT
Vishay Intertechnology's NTCS0603E3103HMT is a NTC thermistor with 10000 ohm resistance, 3% tolerance, and 3610 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its -40 to 150 °C operating range and AEC-Q200, CUL, UL certifications. The SMT package with dual-ended terminals makes it suitable for surface mount installations.
B57227K0333A001
B57227K0333A001 by TDK is a NTC thermistor with 32762 ohm resistance, 10% tolerance, and 0.2 W power dissipation. It is used for temperature sensing applications with a thermal sensitivity index of 4300 K, rated for -55 to 155 °C operating temperatures in radial terminal placement.
NTC0805J470R
TE Connectivity's NTC0805J470R is a 470 ohm NTC thermistor with 5% tolerance and 0.125 W power dissipation. It features dual-ended terminals in a rectangular package (2mm x 1.25mm x 0.5mm) for temperature sensing applications, suitable for surface mounting method.
RXEF005-2
TE Connectivity's RXEF005-2 is a PTC resettable fuse with 20 ohm resistance and rated AC voltage of 60V. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. With a max operating temperature of 85°C and min of -40°C, it offers through-hole mounting and 0.22W power dissipation.
RUEF250
TE Connectivity's RUEF250 is a PTC resettable fuse with resistance of 0.07 ohm and rated power dissipation of 1.2W. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape. Operating temperatures range from -40 to 85°C.
V22ZA1P
V22ZA1P by Littelfuse is a varistor with 18V operating voltage and 0.9J energy absorption capacity. It has a radial package shape, matte tin terminal finish, and operates b/w -55°C to 125°C. Ideal for surge protection in electronic circuits requiring up to 14V RMS voltage protection.
LVR100S-240-2
LVR100S-240-2 by Littelfuse is a PTC resettable fuse used for overcurrent protection. It has a resistance of 0.218 ohm and can operate at temperatures ranging from -40 to 85 °C. Its radial terminal placement and through hole mounting make it easy to install in various applications.
PTCCL05H390HBE
Vishay Intertechnology's PTCCL05H390HBE is a PTC thermistor with 260 ohm resistance, rated for 265V AC voltage. Ideal for overload protection applications, it has radial terminal placement and disk package shape. Operating temperature ranges from -25°C to 125°C, with matte tin over nickel terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-MSMF075/24-2
Bourns
The Bourns MF-MSMF075/24-2 is a PTC resettable fuse with resistance of 0.11 ohm, operating voltage of 24V, and max temp of 85°C. It is used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style.
MF-MSMF050-2
The Bourns MF-MSMF050-2 is a PTC resettable fuse with resistance of 0.15 ohm and operating voltage of 15V. It is used for overcurrent protection in automotive applications, featuring dual-ended terminals and surface mounting type. AEC-Q200, CUL, TUV, and UL standards are met by this SMT package with gold over nickel terminal finish.
MF-MSMF110/24X-2
The Bourns MF-MSMF110/24X-2 is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
MF-MSMF030-2
The Bourns MF-MSMF030-2 is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 30V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
MF-MSMF020/60-2
The Bourns MF-MSMF020/60-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminals, SMT package style, and gold over nickel terminal finish. Operating temperature ranges from -40°C to 85°C.
MF-MSMF010-2
Bourns MF-MSMF010-2 is a PTC resettable fuse with 0.7 ohm resistance, 60V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in automotive applications due to AEC-Q200 compliance and -40 to 85°C operating temperature range. SMT package style with gold over nickel terminal finish ensures reliable surface mount installation.
MF-MSMF020-2
The Bourns MF-MSMF020-2 is a PTC resettable fuse with a resistance of 0.4 ohm and an operating voltage of 30V. It is commonly used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mount mounting type.
MF-MSMF014-2
The Bourns MF-MSMF014-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style. With AEC-Q200, CUL, TUV, and UL certifications, it ensures reliable performance from -40 to 85°C.
MF-MSMF150/24X-2
Bourns MF-MSMF150/24X-2 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 24V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
MF-MSMF110/16-2
The Bourns MF-MSMF110/16-2 is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 16V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style for surface mounting. The device has a temperature range from -40°C to 85°C and meets standards like AEC-Q200, CUL, TUV, and UL.
MF-MSMF250/16X-2
Bourns MF-MSMF250/16X-2 is a PTC resettable fuse with resistance of 0.015 ohm, operating voltage of 16V, and dual-ended terminals. Ideal for overcurrent protection in SMT applications, it has a temperature range from -40 to 85 °C and meets AEC-Q200, CUL, TUV, and UL standards.
MF-MSHT110KX-2
Bourns MF-MSHT110KX-2 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 16V, and max temperature of 125°C. It is used for overcurrent protection in various applications such as automotive electronics and power supplies.
MF-MSMF110-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Reference Standard: CUL; TUV; UL;
MF-MSMF050/40X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Width (Package): 3.41 mm;
MF-MSHT150KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .022 ohm; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: RMIN AT 23 DEG CEL;
MF-MSMF110/24X
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERLOAD PROTECTION; Manufacturer Series: MF-MSMF; Additional Features: RESISTANCE MIN IS 0.06 OHMS AT 23 DEG CEL;
MF-MSMF200-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Reference Standard: CUL; TUV; UL;
MF-MSMF260-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 4.73 mm;
MF-MSMF075-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Length (Package): 4.73 mm;
MF-MSMF075/33X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: AEC-Q200; CUL; UL; Width (Package): 3.41 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved