Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's ASMD075F-2 is a PTC resettable fuse with resistance of 0.29 ohm, operating voltage of 30V, and max circuit DC voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
Median Price
$0.515
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.710
100+ parts
$0.500
1k+ parts
$0.382
10k+ parts
$0.321
DigiKey
$0.850
$0.290
Chip1Stop
-
$0.446
$0.385
Master Electronics
$0.455
$0.375
Newark
$0.393
$0.391
Nova Conductors
$0.440
Maritex
$0.869
Vyrian
VNN
Aztec Data Supply Inc.
Semicontronic
$0.335
$0.327
$0.325
Continental Prestige Electronics
$0.431
Argo Parts USA
$0.426
Netroflash
Component Stockers USA
$0.760
$0.460
$0.350
Assy Fe
Perfect Parts
This product is specifically designed for overcurrent protection applications, ensuring the safety and longevity of the circuit it is used in.
Having dual-ended terminal placement allows for flexibility in installation and can accommodate various circuit configurations.
The embossed packing method and 13-inch size make for easy handling and storage, reducing the risk of damage during transportation.
With a low resistance value, this product effectively limits the flow of current under normal conditions while providing protection against overcurrent situations.
Having only two terminals simplifies the installation process and reduces the chances of wiring errors, making it user-friendly.
The surface mount technology (SMT) package style allows for easy integration onto circuit boards, saving space and facilitating automated assembly processes.
With a high maximum operating temperature, this product can withstand harsh environmental conditions and maintain its functionality under stress.
The low minimum operating temperature ensures that this product can be used in a wide range of environments without the risk of performance degradation.
The tin terminal finish provides good conductivity and corrosion resistance, ensuring reliable connections over time.
The compact height of the package allows for component placement in tight spaces and contributes to overall space-saving design.
Being a PTC resettable fuse, this product offers self-recovery capability after tripping in overcurrent conditions, providing long-term protection to the circuit.
With an operating voltage of 30 V, this product is suitable for a wide range of applications where overcurrent protection is required within this voltage limit.
The moderate length of the package ensures compatibility with standard PCB layouts and facilitates easy integration into existing circuit designs.
The surface mounting type simplifies the installation process, reduces manual labor, and allows for efficient mass production.
Compliance with AEC-Q200 and TS 16949 standards ensures that this product meets strict quality and performance requirements for automotive and industrial applications.
The maximum circuit DC voltage of 30 V aligns with the operating voltage, providing a consistent level of protection across the entire circuit.
The moderate width of the package allows for efficient use of space on the PCB and facilitates proper heat dissipation for optimal performance.
Non-linear Resistors ASMD075F-2 attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Additional Features:
Maximum Circuit DC Voltage:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
ASMD075F-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Dc Components
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Laube Technology
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
NTCS0603E3103FLT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3103FLT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3435 K thermal sensitivity index. Ideal for temperature sensing applications, it operates b/w -40 to 150 °C and features dual-ended terminals in a compact SMT package.
TFPT1206L1002FM
Vishay Dale
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
NTC0805J5K0
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
MINISMDC050F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .62 mm; Packing Method: TR, EMBOSSED, 7 INCH;
B72214S0251K101
TDK
B72214S0251K101 by TDK is a VARISTOR with 65J energy capacity, 250V RMS voltage, and 320V operating voltage. It is used for surge protection in applications requiring high reliability and durability. The METAL OXIDE technology and radial package make it suitable for various industrial environments.
NTHS1206N02N1002KE
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .28 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
RUEF250U-0.148
TE Connectivity's RUEF250U-0.148 is a PTC thermistor with 2 radial terminals, rated for 30V AC voltage. It is used for overload protection applications due to its rectangular package shape and tin terminal finish. Ideal for through-hole mounting, it offers reliable non-linear resistance properties.
0ZCJ0010FF2E
Bel Fuse
Bel Fuse's 0ZCJ0010FF2E is a PTC resettable fuse with resistance of 1.6 ohm, operating voltage of 60V, and dual-ended terminal placement. Ideal for automotive applications due to AEC-Q200 compliance and compact SMT package style measuring 3.5mm x 1.8mm x 0.85mm.
B72210S0271K101V87
B72210S0271K101V87 by TDK is a VARISTOR with 43J energy capacity, 275V RMS voltage, and 350V operating voltage. It has RADIAL terminals and DISK PACKAGE shape. Ideal for surge protection in electronics due to its high energy absorption and voltage ratings.
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
B72214P2301K101
B72214P2301K101 by TDK is a VARISTOR with 140J energy capacity, 385V operating voltage, and -40 to 105°C temperature range. Ideal for surge protection in electronic circuits due to its METAL OXIDE technology and DUAL ENDED terminal placement in a DISK PACKAGE.
MF-SM100-2
Bourns
The Bourns MF-SM100-2 is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type. The rectangular package measures 7.98mm x 5.44mm x 3mm, suitable for various electronic devices meeting AEC-Q200, CUL, TUV, and UL standards.
V33ZA1P
V33ZA1P by Littelfuse is a varistor with 20V max circuit RMS voltage and 1.2J energy capacity. It operates b/w -55°C to 125°C, suitable for surge protection in electronic circuits. With radial terminal placement and metal oxide film technology, it offers reliable performance in through-hole mounting applications.
PTCCL09H171HBE
Vishay Intertechnology PTCCL09H171HBE is a 22 ohm PTC thermistor with 20% tolerance. It offers overload protection at rated AC voltage of 265 V, with operating temperatures from -25 to 125 °C. Ideal for through hole mounting in applications requiring radial terminal placement and disk package shape.
B57164K0101J000
B57164K0101J000 by TDK is a NTC thermistor with 100 ohm resistance, 5% tolerance, and 3200 K thermal sensitivity index. It is used for temperature compensation applications with a rated temperature range of -55 to 125 °C. The thermistor has radial terminal placement and matte tin finish, suitable for through hole mounting in various electronic devices.
B57237-S220-M
TDK's B57237-S220-M NTC Thermistor has a resistance of 22 ohm with 20% tolerance. Rated for 265V AC, it operates b/w -55°C to 170°C. Ideal for soft start applications due to its thermal sensitivity index of 3060 K.
B57364S0100M000
TDK B57364S0100M000 is a NTC thermistor with 10 ohm resistance, 20% tolerance, and 5.1 W power dissipation. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -55 to 170 °C.
B72214S1300K102
The TDK B72214S1300K102 is a VARISTOR with 9J energy capacity, 30V RMS voltage, and -40 to 85°C operating range. Ideal for surge protection in circuits with 34V operating voltage. RADIAL package style makes it suitable for THROUGH HOLE MOUNT applications.
16R1400GH
16R1400GH by Littelfuse is a PTC resettable fuse with resistance of 0.0026 ohm and operating voltage of 16V. It is used for overcurrent protection in applications requiring radial terminal placement and rectangular package shape. Operating temperature ranges from -40 to 85°C, meeting standards like CUL, TUV, and UL.
B59607-A120-A62
B59607-A120-A62 by TDK is a PTC thermistor with 55 ohm resistance and 25% tolerance. It is used for overload protection, featuring dual-ended terminals in a rectangular package. With a rated AC voltage of 30V, it operates b/w -20°C to 85°C, suitable for surface mount applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ASMD050F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .29 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: TIN; Additional Features: RMIN AT 25 DEG CEL;
TE Connectivity's ASMD050F-2 is a PTC resettable fuse with 60V URac, 1.7W power dissipation, and max temp of 85°C. It features dual-ended terminals in a rectangular package for temperature sensing applications using surface mounting method.
ASMD100F-2
TE Connectivity's ASMD100F-2 is a PTC resettable fuse with 0.098 ohm resistance, 30V operating voltage, and -40 to 85°C temperature range. It features dual-ended terminals for overcurrent protection in surface mount applications. AEC-Q200 and TS 16949 compliant, it offers reliable circuit protection in compact SMT packages.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .098 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): 3 mm; JESD-609 Code: e3;
ASMD075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .29 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Finish: Tin (Sn);
ASMD030F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .98 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Thermistor Application: OVERCURRENT PROTECTION;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .98 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; No. of Terminals: 2;
ASMD150F/33-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .068 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 13 INCH; Minimum Operating Temperature: -40 Cel;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .068 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Reference Standard: AEC-Q200; TS 16949;
ASMDC185F/33-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .05 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin (Sn); Packing Method: TR, EMBOSSED, 13 INCH;
ASMD185F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .032 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 6.71 mm; Maximum Circuit DC Voltage: 16 V;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .032 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Packing Method: TR, EMBOSSED, 13 INCH;
ASMD050F
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .29 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Terminal Placement: DUAL ENDED;
ASMD150F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .049 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 25 DEG CEL; Width (Package): 6.71 mm;
ASMD150F/33
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .068 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Terminal Placement: DUAL ENDED;
ASMD100F
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .098 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 5.44 mm; Terminal Placement: DUAL ENDED;
ASMD185F
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .032 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Packing Method: BULK;
ASMD125F
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .057 ohm; Maximum Operating Temperature: 85 Cel; Length (Package): 7.98 mm; Height (Package): 3 mm;
ASMD030F
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .98 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): 3.18 mm; Reference Standard: AEC-Q200, TS 16949;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved