Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's NTCALUG02A103FLA is a non-linear resistor with a resistance of 10000 ohm and a thermal sensitivity index of 3435 K. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -55 °C.
Median Price
$1.545
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Newark
1+ parts
$0.701
100+ parts
1k+ parts
10k+ parts
Farnell
$1.460
$1.050
$0.952
-
Mouser Electronics
$1.630
$1.340
$1.140
$1.080
DigiKey
$1.830
$1.335
$1.177
$1.090
Element14
$2.571
$1.468
$1.282
$1.066
Verical
$1.145
$1.099
Nova Conductors
$1.095
Rutronik
$0.616
$0.610
Vyrian
Aztec Data Supply Inc.
$0.250
Semicontronic
$0.269
$0.262
$0.261
Corohmni
$0.302
Advanced Electronics
$1.008
Argo Parts USA
Continental Prestige Electronics
$2.280
$0.885
Microchip USA
$11.050
$10.980
$10.950
$10.910
Perfect Parts
Netroflash
$1.073
$1.040
$1.018
This spec indicates that the thermistor is specifically designed for accurately sensing temperature, making it a reliable choice for temperature-sensitive applications.
The specified resistance value of 10000 ohm ensures precise and consistent performance in controlling electric current, making it suitable for various electronic circuits.
The high thermal sensitivity index of 3435 K indicates that this thermistor can detect small temperature changes effectively, making it ideal for applications requiring quick and accurate temperature measurements.
With a high maximum operating temperature of 125 °C, this thermistor can withstand elevated temperatures without compromising its performance, ensuring reliable operation in challenging environments.
The terminal finish of TIN ensures good conductivity and corrosion resistance, enhancing the longevity and reliability of the connections in the thermistor.
Non-linear Resistors NTCALUG02A103FLA attributes and parameters. Explore more Non-linear Resistors devices from Vishay Intertechnology
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
NTCALUG02A103FLA Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Assembly/Origin - NTCALUG Series Supplier 09/Nov/2022
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
Lite-on Semiconductor
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Formosa Microsemi
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RUEF400
TE Connectivity
TE Connectivity's RUEF400 is a PTC resettable fuse with resistance of 0.05 ohm and rated power dissipation of 2.5W. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape for through-hole mounting.
B72214-S271-K101
TDK
TDK's B72214-S271-K101 varistor has a max energy capacity of 71J, operating voltage of 350V, and max circuit RMS voltage of 275V. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
MF-R010-0-17
Bourns
The Bourns MF-R010-0-17 is a PTC resettable fuse with 2.5 ohm resistance and 60V operating voltage, suitable for overcurrent protection applications. It features radial terminal placement, disk package shape, and operates b/w -40°C to 85°C. This non-linear resistor has CUL, TUV, and UL certifications for quality assurance.
MF-R030-2
Bourns MF-R030-2 is a PTC resettable fuse with resistance of 0.76 ohm, operating voltage of 60V, and max temp of 85°C. It is used in applications requiring radial terminal placement, such as overcurrent protection in electronic circuits.
EZJPZV270RA
The Panasonic EZJPZV270RA is a varistor with 16V operating voltage and -40 to 85°C temperature range. It features dual-ended terminals in a rectangular SMT package for surface mounting applications. With matte tin finish, it offers protection against overvoltage in electronic circuits.
B72210S2301K101
The TDK B72210S2301K101 is a VARISTOR with 60J energy capacity, 300V RMS voltage, and 385V operating voltage. It is used for surge protection in various applications due to its METAL OXIDE FILM technology and radial package shape.
MF-R110-0
The Bourns MF-R110-0 is a PTC resettable fuse with resistance of 0.1 ohm, operating voltage of 30V, and dimensions of 24.2mm x 3mm x 32.9mm. It is used in applications requiring overcurrent protection in electronic circuits due to its non-linear resistor properties and radial terminal placement for through-hole mounting.
RF1180-000
TE Connectivity's RF1180-000 is a PTC resettable fuse with 0.04 ohm resistance and 24V operating voltage. It features dual-ended terminals, SMT package style, and WRAPAROUND shape. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and rated power dissipation of 1W.
V33ZA1P
Littelfuse
V33ZA1P by Littelfuse is a varistor with 20V max circuit RMS voltage and 1.2J energy capacity. It operates b/w -55°C to 125°C, suitable for surge protection in electronic circuits. With radial terminal placement and metal oxide film technology, it offers reliable performance in through-hole mounting applications.
RXEF075-AP
TE Connectivity's RXEF075-AP is a PTC resettable fuse with resistance of 0.25 ohm and rated power dissipation of 0.92 W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape for through hole mounting.
MPTS2920L150
MPTS2920L150 by Meritek Electronics is a PTC thermistor with 1.5W power dissipation, operating b/w -40°C to 85°C. It features dual-ended terminals in a rectangular package for temperature sensing applications. The thermistor has pure tin terminal finish and is surface mountable for easy installation.
MINISMDC030F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .89 mm; Operating Voltage: 30 V;
B72220P3301K101
The TDK B72220P3301K101 is a VARISTOR with 305J energy capacity, 385V operating voltage, and 1W power dissipation. It is used for surge protection in circuits with up to 300V RMS voltage. Ideal for applications requiring high transient voltage suppression in radial through-hole mounting setups.
V20E25P
V20E25P by Littelfuse is a 1W VARISTOR with 77J energy capacity, suitable for surge protection in various applications. With a max operating temp of 85°C and -40°C min, it offers protection against voltage spikes up to 31V RMS and DC. Its radial package style makes it ideal for through-hole mounting.
TMP6131DECR
TMP6131DECR by Texas Instruments is a PTC thermistor with 10000 ohm resistance and 1% tolerance. It is used for temperature sensing applications, featuring dual-ended terminals in X1SON package style. Operating from -40 to 125 °C, it's ideal for surface mounting with TR packing method.
B57235-S100-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Maximum Operating Temperature: 170 Cel; No. of Terminals: 2; Thermistor Application: SOFT START;
V275LA20A
Non-linear Resistors; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -55 Cel; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 75 J;
MOV-10D561KTR
MOV-10D561KTR by Bourns is a VARISTOR with 70J energy capacity, 350V RMS voltage, and 460V operating voltage. Ideal for surge protection in circuits with -40 to 105°C temp range, it comes in radial package style for through-hole mounting.
NCP18XQ102J03RB
Murata Manufacturing
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
RF2564-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 4.4 ohm; Rated Power Dissipation (P): .41 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTCALUG02A103F
Vishay Intertechnology
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; No. of Terminals: 2;
NTCALUG01A103F161A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Thermal Sensitivity Index: 3984 K;
NTCALUG01T103G501A
Vishay Intertechnology's NTCALUG01T103G501A is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and 2% tolerance. Ideal for temperature sensing applications, it has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Packaged in chassis mount style, it meets AEC-Q200, CUL, and UL standards.
NTCALUG02A103G
Vishay Intertechnology's NTCALUG02A103G is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and disk package shape. It has a thermal sensitivity index of 3984 K and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, it features tin terminal finish and chassis mount packaging.
NTCALUG01A103F
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Height (Package): 15.7 mm;
NTCALUG01A103F161
Vishay Intertechnology's NTCALUG01A103F161 is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, it features radial terminal placement and tin finish, suitable for chassis mount installations.
NTCALUG01T103G501
Vishay Intertechnology's NTCALUG01T103G501 is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and chassis mount package. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, meeting AEC-Q200, CUL, and UL standards.
NTCALUG02A103FL
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Length (Package): 8.5 mm;
NTCALUG01T103GA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %; Reference Standard: AEC-Q200; CUL, UL;
NTCALUG01T103FLA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; No. of Terminals: 2;
NTCALUG02A103FA
Vishay Intertechnology's NTCALUG02A103FA is a non-linear resistor with a resistance of 10000 ohm and a tolerance of 1%. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -55 °C.
NTCALUG01A103F161L
Vishay Intertechnology NTCALUG01A103F161L is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3435 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, featuring radial terminal placement and chassis mount package style.
NTCALUG01T103G201A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %; Thermal Sensitivity Index: 3984 K;
NTCALUG01A103FA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Terminal Placement: RADIAL;
NTCALUG01A103FLA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Package Style (Meter): Chassis Mount;
NTCALUG03A103GC
Vishay Intertechnology's NTCALUG03A103GC is a non-linear resistor with a resistance of 10000 ohm and a tolerance of 2%. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -40 °C.
NTCALUG01A103F800A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Width (Package): 5.6 mm;
NTCALUG02A103F161
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Width (Package): 4.3 mm;
NTCALUG02A103F161L
NTCALUG02A103F165A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Reference Standard: AEC-Q200; CUL; UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved