Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's NCP18XH103F0SRB is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3380 K and can operate b/w -40 to 125 °C. Ideal for temperature sensing applications, this surface mount device features dual-ended terminals in a rectangular package.
Median Price
$0.110
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.320
100+ parts
$0.192
1k+ parts
$0.121
10k+ parts
$0.119
TTI Europe
-
$0.066
TTI
$0.109
Arrow
$0.083
Verical
$0.141
$0.111
Future Electronics
$0.112
Greenchips
$0.044
$0.041
Nova Conductors
$0.140
TME
$0.300
$0.184
$0.118
$0.080
Bristol Electronics
$0.150
$0.060
$0.045
Rutronik
$0.040
Cyclops Electronics Ltd
Vyrian
ACDS - Activité Composants Distribution Service
LIBRA Elektronik GmbH
NAC Semi
$0.117
IBS Electronics
$0.144
EMSNET
Velocity Electronics
Prism Electronics
SIE Connect GmbH - GreenChips
LWI Electronics Inc
Sensible Micro Corp
Advanced Electronics
$0.012
$0.011
$0.010
Aztec Data Supply Inc.
Semicontronic
$0.056
$0.055
$0.054
Continental Prestige Electronics
$0.137
Argo Parts USA
$0.136
Corohmni
$0.145
Perfect Parts
GreenTree Electronics
Kepictronics
Infinite Electronics LLP (Excess)
A-Z Elektronik GmbH
RC Electronics
Authorized Procurement Solutions
Component Connect
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
Montclair Electronics, Inc.
Allows the thermistor to operate effectively in a wide range of temperatures, making it suitable for various applications.
Specifically designed for temperature sensing, ensuring accurate and reliable temperature measurements.
Dual ended terminal placement provides convenient connectivity options, enhancing ease of installation.
With a resistance of 10k ohm, this thermistor offers precise and consistent performance in temperature sensing applications.
Having 2 terminals simplifies the connection process and ensures proper circuit configuration.
The wraparound terminal shape offers secure and stable connections, reducing the risk of electrical faults.
With a maximum operating temperature of 125°C, this thermistor can handle high temperature environments with ease.
High thermal sensitivity index allows for accurate and responsive temperature readings.
The ability to operate at a minimum temperature of -40°C ensures reliable operation in cold environments.
Tin terminal finish provides good conductivity and corrosion resistance, extending the lifespan of the thermistor.
NTC thermistors have a negative temperature coefficient, meaning their resistance decreases with increasing temperature, making them ideal for temperature sensing applications.
With a tolerance of 1%, this thermistor offers high precision and accuracy in temperature measurements.
Surface mounting type allows for easy and secure installation on circuit boards, saving space and facilitating mass production.
With a rated power dissipation of 0.1W, this thermistor can handle moderate power loads while maintaining stability and accuracy.
Non-linear Resistors NCP18XH103F0SRB attributes and parameters. Explore more Non-linear Resistors devices from Murata Manufacturing
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
NCP18XH103F0SRB Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LL4148-GS08
Vishay Telefunken
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
V130LA5P
Littelfuse
V130LA5P by Littelfuse is a varistor with rated AC voltage of 130V and max energy absorption of 20J. It is used for temperature compensation applications, featuring metal oxide film technology and radial terminal placement. With a package style of disk shape, it operates b/w -55°C to 125°C temperatures.
V18AUMLA2220H
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -40 Cel; Shape (Package): RECTANGULAR PACKAGE; Operating Voltage: 18 V;
NB12K00103JBB
KYOCERA AVX
NB12K00103JBB by KYOCERA AVX is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 0.12 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and rectangular package shape. Operating b/w -55°C to 150°C, it offers high thermal sensitivity index of 3630 K.
B59754B0120A070
TDK
The TDK B59754B0120A070 is a PTC thermistor with 150 ohm resistance, rated for 440V AC. It is used for overload protection in various applications. Featuring radial terminal placement and disk package shape, it operates b/w -40°C to 125°C temperature range.
0603L100SLYR
0603L100SLYR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 6V, and rated power dissipation of 0.6W. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
B72214-S271-K101
TDK's B72214-S271-K101 varistor has a max energy capacity of 71J, operating voltage of 350V, and max circuit RMS voltage of 275V. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
NTCG103JF103FT1S
NTCG103JF103FT1S by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 5V operating voltage. Ideal for temperature sensing applications due to its high thermal sensitivity index of 3435 K and AEC-Q200 reference standard compliance. Package style is SMT with dual-ended terminals for surface mounting type.
ASMD030F-2
TE Connectivity
TE Connectivity's ASMD030F-2 is a PTC resettable fuse with resistance of 0.98 ohm, operating voltage of 60V, and dual-ended terminal placement. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and min of -40°C. This SMT package features flat terminals and tin finish in a compact size suitable for surface mounting.
NTHS1206N01N1003JE
Vishay Intertechnology
Vishay Intertechnology's NTHS1206N01N1003JE is a NTC thermistor with 100k ohm resistance, 5% tolerance, and 0.28W power dissipation. Ideal for temperature compensation applications, it operates b/w -40°C to 125°C with thermal sensitivity index of 3974K. This surface mount device features dual-ended terminals in a rectangular package.
55002
Measurement Specialties
NTC THERMISTOR; No. of Terminals: 2;
RF2631-000
TE Connectivity's RF2631-000 is a non-linear resistor with a resistance of 4.4 ohm and rated AC voltage of 72 V. It is commonly used for temperature sensing applications, with a max operating temperature of 85 °C and min operating temperature of -40 °C.
2920L030DR
2920L030DR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. This thermistor has dimensions of 7.98mm x 5.44mm x 1.25mm and operates b/w -40°C to 85°C.
EZJZ1V220JA
Panasonic
The Panasonic EZJZ1V220JA is a VARISTOR resistor with DUAL ENDED terminals, suitable for SURFACE MOUNT applications. It has an operating voltage of 13V and can withstand temperatures from -40 to 85°C. The RECTANGULAR PACKAGE measures 1.6mm in length, 0.8mm in width and height, with TIN terminal finish.
0ZCM0001FF2G
Bel Fuse
Bel Fuse's 0ZCM0001FF2G is a PTC resettable fuse with resistance of 15 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used in automotive applications due to AEC-Q200 compliance, with dual-ended terminal placement and surface mounting type for easy installation.
MF-PSMF020X-2
Bourns
The Bourns MF-PSMF020X-2 is a PTC resettable fuse with resistance of 0.65 ohm, suitable for overcurrent protection in circuits up to 9V DC. It features dual-ended terminals, SMT package style, and operates b/w -40°C to 85°C. Ideal for applications requiring compact surface-mount components with gold-nickel finish.
CL-60
Ge Sensing
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Maximum Operating Temperature: 175 Cel; Tolerance: 25 %; Minimum Operating Temperature: -50 Cel;
B59965C0120A070
The TDK B59965C0120A070 is a PTC thermistor with 1.2 ohm resistance and 25% tolerance. It is used for overcurrent protection in applications requiring a rated AC voltage of 30V. With radial terminal placement, it operates b/w -40°C to 125°C, making it suitable for through-hole mounting.
PFMF.020.2
Schurter Ag
Schurter Ag's PFMF.020.2 is a PTC resettable fuse with resistance of 0.4 ohm, rated AC voltage of 30V, and operating temperature range from -40 to 85 °C. It is used for temperature sensing applications in surface mount installations with dual-ended terminals and wraparound shape.
NTCS0603E3103JLT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
ERTJ0EG103JA
Panasonic ERTJ0EG103JA is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 125°C max operating temp. Ideal for temperature compensation applications due to its thermal sensitivity index of 3435 K and SMT package style for surface mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP18XH103F03RB
Murata Manufacturing
Murata Manufacturing's NCP18XH103F03RB is a 10000 ohm NTC thermistor with dual-ended terminals, SMT package style, and 1% tolerance. It is used for temperature sensing applications with an operating voltage of 5V and a thermal sensitivity index of 3380K. The thermistor has a max operating temperature of 125°C and min of -40°C, making it suitable for various temperature monitoring systems.
NCP15XH103F03RC
Murata Manufacturing's NCP15XH103F03RC is a Non-linear Resistor with 10000 ohm resistance, -40 to 125 °C operating temperature range, and 1% tolerance. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in RECTANGULAR PACKAGE.
NCP18XH103J03RB
Murata Manufacturing's NCP18XH103J03RB is a Non-linear Resistor with 10000 ohm resistance, 5% tolerance, and -40 to 125 °C operating temperature range. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE.
NCP15XH103J03RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; JESD-609 Code: e3;
NCP15WF104F03RC
Murata Manufacturing's NCP15WF104F03RC is a Non-linear Resistor with 100000 ohm resistance, 1% tolerance, and 5V operating voltage. It is used for TEMPERATURE SENSING applications due to its high thermal sensitivity index of 4250 K and wide temperature range from -40°C to 125°C. The thermistor features dual-ended terminals in a surface mount package style for easy installation.
NCP18WF104J03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Terminal Shape: WRAPAROUND;
NCP18XQ102J03RB
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
NCP18WF104F12RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Shape (Package): RECTANGULAR PACKAGE;
NCP18XW472J03RB
NCP18XW472J03RB by Murata Manufacturing is a non-linear resistor used for temperature compensation. It has a resistance of 4700 ohm, operating voltage of 5V, and max operating temperature of 125°C. Its dual-ended terminal placement and rectangular package make it suitable for surface mount applications.
NCP18WM154J03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Width (Package): .8 mm;
NCP18WM474J03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Operating Voltage: 5 V;
NCP18XH103D03RB
Murata Manufacturing's NCP18XH103D03RB is a Non-linear Resistor with 10000 ohm resistance, -40 to 125 °C operating temp range, and 5 V operating voltage. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE.
NCP18XV103J03RB
Murata Manufacturing's NCP18XV103J03RB is a Non-linear Resistor with 10000 ohm resistance, operating voltage of 5 V, and thermal sensitivity index of 3900 K. It is used for temperature sensing applications with a max operating temperature of 125 °C and min of -40 °C. The thermistor has dual-ended terminals in a rectangular SMT package.
NCP18WM154E03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %; Operating Voltage: 5 V;
NCP15XH103E03RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %; Length (Package): 1 mm;
NCP18XH103J0SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NCP18XW223J03RB
NCP18XW223J03RB by Murata is a Non-linear Resistor with 22000 ohm resistance, -40 to 125 °C operating temperature range, and 5% tolerance. It is used for TEMPERATURE SENSING applications, featuring DUAL ENDED terminals in a RECTANGULAR PACKAGE suitable for SURFACE mounting.
NCP18WB473F10RB
Murata Manufacturing's NCP18WB473F10RB is a Non-linear Resistor with 47000 ohm resistance, 1% tolerance, and operating voltage of 5V. It is used for TEMPERATURE SENSING applications due to its NTC THERMISTOR type and thermal sensitivity index of 4050 K. The thermistor has DUAL ENDED terminals in a RECTANGULAR PACKAGE suitable for SURFACE mounting.
NCP18WB473K03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
NCP18XH103K0SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved