Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's NCP18WM474J03RB is a Non-linear Resistor with 470k ohm resistance, 5% tolerance, and -40 to 125°C operating temperature range. It is used for TEMPERATURE SENSING applications due to its NTC THERMISTOR type, DUAL ENDED terminals, and SMT package style.
Median Price
$0.094
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.160
100+ parts
$0.123
1k+ parts
$0.093
10k+ parts
$0.084
DigiKey
$0.180
$0.122
$0.104
-
Arrow
$0.074
Avnet
$0.063
TTI Europe
$0.056
Chip1Stop
$0.034
Verical
$0.116
$0.087
Newark
$0.100
Farnell
$0.089
$0.065
$0.061
Element14
$0.181
$0.127
$0.119
Greenchips
$0.052
$0.050
$0.048
$0.043
Nova Conductors
$0.086
TME
$0.079
$0.057
$0.044
Component Electronics Inc.
$0.120
$0.090
$0.080
LIBRA Elektronik GmbH
IBS Electronics
$0.131
NAC Semi
$0.111
Vyrian
Chip Stock
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Bristol Electronics
Rutronik
$0.028
ComSIT Distribution GmbH
SIE Connect GmbH - GreenChips
EPE Components Inc.
Semtec, LLC
Micros
Partservice
$0.097
Micros sp.j. W. Kędra i J. Lic
$0.047
PC Components Company LLC
Speed Components Ltd
Goldney Electronics S.L.
J2 Sourcing AB
Connector Distribution Corp
Right Parts Inc.
Sea View Technologies
Euro-Tech
Semicontronic
Aranea Global
$0.085
$0.081
Argo Parts USA
Corohmni
Authorized Procurement Solutions
Perfect Parts
Futuretech Components
Kepictronics
Cyclops Electronics Ltd (Excess)
Continental Prestige Electronics
$0.103
$0.069
$0.053
This thermistor is specifically designed for temperature sensing applications, ensuring accurate and reliable temperature measurements.
With a high resistance value of 470000 ohm, this thermistor provides precise and stable resistance characteristics for temperature sensing.
With a maximum operating temperature of 125 °C, this thermistor can withstand high temperatures, making it suitable for a wide range of temperature sensing applications.
The low operating voltage requirement of 5 V makes this thermistor energy-efficient and compatible with various electronic systems.
The 5% tolerance ensures that the thermistor provides consistent and accurate temperature measurements within a specified range.
Non-linear Resistors NCP18WM474J03RB attributes and parameters. Explore more Non-linear Resistors devices from Murata Manufacturing
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Resistance:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
Operating Voltage:
NCP18WM474J03RB Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1554216004
Molex
WIRE AND CABLE;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
BAV99WT1G
Fairchild Semiconductor
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
PESD0603-240
Littelfuse
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Technology: METAL GLAZE/THICK FILM; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; No. of Terminals: 2;
NTCLE400E3472HA
Vishay Intertechnology
Vishay Intertechnology NTCLE400E3472HA is a 4700 ohm NTC thermistor with -40 to 85°C operating range. Featuring 3% tolerance, it has thermal sensitivity index of 3977 K and 0.25 W power dissipation. Ideal for temperature sensing applications, this radial thermistor is chassis mountable with flexible wire terminals.
LVR025K-2
TE Connectivity
TE Connectivity's LVR025K-2 is a PTC resettable fuse with 1.5W power dissipation and 240V rated AC voltage. Ideal for temperature sensing applications, it features radial terminal placement in a disk package for through-hole mounting at up to 85°C operating temperature.
DFP10112
Tdk-lambda
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 1.6 W; Tolerance: 5 %; Terminal Shape: WIRE;
MF-R090-0-9
Bourns MF-R090-0-9 is a PTC resettable fuse with resistance of 0.07 ohm, operating voltage of 30V, and max temp of 85°C. Ideal for overcurrent protection in various applications due to its radial terminal placement and through-hole mounting style.
B57332V5103F360
TDK
B57332V5103F360 by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3455 K thermal sensitivity index. It is used for temperature compensation in various applications due to its dual-ended terminal placement and surface mount package style. Operating b/w -40°C to 150°C, it meets AEC-Q200 and UL standards.
11032562-00
TE Connectivity's 11032562-00 is a non-linear resistor with 10000 ohm resistance, suitable for temperature sensing applications. Featuring radial terminal placement and flexible wire shape, it operates b/w -40 to 150 °C with high thermal sensitivity index of 3978 K. Ideal for chassis mounting, this component has two terminals and a lead length of 76 mm.
RXEF075
TE Connectivity's RXEF075 is a PTC resettable fuse with resistance of 0.6 ohm and rated power dissipation of 0.92 W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating temperature ranges from -40 to 85 °C.
B72220-S251-K101
The TDK B72220-S251-K101 is a VARISTOR with 140J energy capacity, 250V RMS voltage, and 320V operating voltage. Ideal for surge protection in circuits with temperatures ranging from -40 to 85°C. Its radial terminal placement and disk package make it suitable for through-hole mounting applications.
V275LA40APX10
V275LA40APX10 by Littelfuse is a 275V varistor with 140J energy capacity. It operates b/w -55°C to 125°C, ideal for temperature compensation applications. With radial terminal placement and metal oxide film technology, it offers reliable protection in bulk packaging.
VCAT06AG18120YAT3A
KYOCERA AVX
VCAT06AG18120YAT3A by KYOCERA AVX is a VARISTOR with 18V operating voltage and 14V max RMS voltage. It has dual-ended terminals, SMT package style, and can operate b/w -55°C to 150°C. Ideal for automotive applications meeting AEC-Q200 standard.
SIOV-S20K275
SIOV-S20K275 by Infineon is a METAL OXIDE FILM VARISTOR with 151J energy capacity. It operates at 350V DC/275V RMS, suitable for THROUGH HOLE MOUNT applications. This non-linear resistor in radial package style with Tin/Lead finish is ideal for surge protection in various electronic circuits.
MF-R010
The Bourns MF-R010 is a PTC resettable fuse with 2.5 ohm resistance and 60V operating voltage. It features radial terminal placement, matte tin finish, and operates b/w -40 to 85 °C. Ideal for overcurrent protection in various electronic applications due to its compact disk package design.
CG0603MLA-5.5ME
Bourns CG0603MLA-5.5ME is a varistor with 5.5V operating voltage, 0.1J energy capacity, and 4V RMS voltage. It's a surface mount device with dual-ended terminals, metal oxide film technology, and nickel barrier finish. Ideal for surge protection in electronics due to its compact rectangular package design.
1206L150THWR
1206L150THWR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 8V, and max temp of 85°C. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style. The thermistor has a compact size (3.4mm x 1.8mm x 1mm) and meets standards like CUL, TUV, and UL.
ERTJ1VS104FA
Panasonic
Panasonic ERTJ1VS104FA is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K. The dual-ended rectangular package with SMT style and wraparound terminals makes it suitable for surface mounting method.
V33MLA1206H
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Packing Method: TR, PLASTIC, 7 INCH;
SIOV-S14K275
Siemens
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Shape (Package): DISK PACKAGE;
B57321V2103J60
B57321V2103J60 by TDK is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3980 K thermal sensitivity index. It is used for temperature compensation in various applications due to its dual-ended terminal placement and surface mount package style. With an operating temperature range from -55°C to 125°C, it offers precise thermal sensing capabilities.
MF-R030
Bourns MF-R030 is a PTC resettable fuse with resistance of 0.76 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It has radial terminal placement and wire shape, suitable for through hole mounting applications in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP18XH103F03RB
Murata Manufacturing
Murata Manufacturing's NCP18XH103F03RB is a 10000 ohm NTC thermistor with dual-ended terminals, SMT package style, and 1% tolerance. It is used for temperature sensing applications with an operating voltage of 5V and a thermal sensitivity index of 3380K. The thermistor has a max operating temperature of 125°C and min of -40°C, making it suitable for various temperature monitoring systems.
NCP15XH103F03RC
Murata Manufacturing's NCP15XH103F03RC is a Non-linear Resistor with 10000 ohm resistance, -40 to 125 °C operating temperature range, and 1% tolerance. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in RECTANGULAR PACKAGE.
NCP18XH103J03RB
Murata Manufacturing's NCP18XH103J03RB is a Non-linear Resistor with 10000 ohm resistance, 5% tolerance, and -40 to 125 °C operating temperature range. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE.
NCP15XH103J03RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; JESD-609 Code: e3;
NCP15WF104F03RC
Murata Manufacturing's NCP15WF104F03RC is a Non-linear Resistor with 100000 ohm resistance, 1% tolerance, and 5V operating voltage. It is used for TEMPERATURE SENSING applications due to its high thermal sensitivity index of 4250 K and wide temperature range from -40°C to 125°C. The thermistor features dual-ended terminals in a surface mount package style for easy installation.
NCP18WF104J03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Terminal Shape: WRAPAROUND;
NCP18XH103F0SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
NCP18XQ102J03RB
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
NCP18WF104F12RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Shape (Package): RECTANGULAR PACKAGE;
NCP18XW472J03RB
NCP18XW472J03RB by Murata Manufacturing is a non-linear resistor used for temperature compensation. It has a resistance of 4700 ohm, operating voltage of 5V, and max operating temperature of 125°C. Its dual-ended terminal placement and rectangular package make it suitable for surface mount applications.
NCP18WM154J03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Width (Package): .8 mm;
NCP18XH103D03RB
Murata Manufacturing's NCP18XH103D03RB is a Non-linear Resistor with 10000 ohm resistance, -40 to 125 °C operating temp range, and 5 V operating voltage. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE.
NCP18XV103J03RB
Murata Manufacturing's NCP18XV103J03RB is a Non-linear Resistor with 10000 ohm resistance, operating voltage of 5 V, and thermal sensitivity index of 3900 K. It is used for temperature sensing applications with a max operating temperature of 125 °C and min of -40 °C. The thermistor has dual-ended terminals in a rectangular SMT package.
NCP18WM154E03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %; Operating Voltage: 5 V;
NCP15XH103E03RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %; Length (Package): 1 mm;
NCP18XH103J0SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NCP18XW223J03RB
NCP18XW223J03RB by Murata is a Non-linear Resistor with 22000 ohm resistance, -40 to 125 °C operating temperature range, and 5% tolerance. It is used for TEMPERATURE SENSING applications, featuring DUAL ENDED terminals in a RECTANGULAR PACKAGE suitable for SURFACE mounting.
NCP18WB473F10RB
Murata Manufacturing's NCP18WB473F10RB is a Non-linear Resistor with 47000 ohm resistance, 1% tolerance, and operating voltage of 5V. It is used for TEMPERATURE SENSING applications due to its NTC THERMISTOR type and thermal sensitivity index of 4050 K. The thermistor has DUAL ENDED terminals in a RECTANGULAR PACKAGE suitable for SURFACE mounting.
NCP18WB473K03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
NCP18WM474J0SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved