Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
V5.5MLA0805LNH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is ideal for surge protection in SMT applications at temperatures ranging from -40 to 125°C.
Median Price
$0.216
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.090
100+ parts
-
1k+ parts
10k+ parts
Arrow
Mouser Electronics
$0.470
$0.255
$0.191
DigiKey
$0.215
RS Americas
$0.495
$0.386
$0.307
Newark
$0.635
$0.422
$0.268
TTI
$0.171
Future Electronics
$0.166
TTI Europe
$0.153
Verical
$0.196
Farnell
$0.235
$0.158
$0.139
Element14
$0.394
$0.209
$0.160
Chip1Stop
Nova Conductors
$0.490
Bristol Electronics
$0.637
$0.319
$0.128
Component Electronics Inc.
$1.540
$1.150
$1.000
Vyrian
Rutronik
$0.131
NAC Semi
$0.309
IBS Electronics
$0.192
Inventory MP
Semicontronic
$0.111
$0.108
iBuyXS LLC
Aztec Data Supply Inc.
$0.270
Continental Prestige Electronics
$0.327
$0.243
$0.159
$0.126
Argo Parts USA
$0.475
Netroflash
Allen Electronics Distributors
$0.520
$0.450
$0.440
Perfect Parts
Infinite Electronics LLP (Excess)
BidChips
GreenTree Electronics
Authorized Procurement Solutions
Glotronic Ltd.
Corohmni
Allows for easy and flexible connection to the circuit, making installation simple and efficient.
Capable of absorbing high levels of energy, offering reliable protection against voltage surges and spikes.
Surface mount technology allows for compact and space-saving design, ideal for modern electronic devices.
Designed to work safely with AC voltages up to 4V, ensuring consistent performance and protection.
Can operate at high temperatures without compromising performance, suitable for a wide range of applications.
Capable of functioning in extreme cold temperatures, making it versatile and reliable in various environments.
Easy to mount on PCBs using surface mount technology, reducing assembly time and cost.
Non-linear Resistors V5.5MLA0805LNH attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated AC Voltage (URac):
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V5.5MLA0805LNH Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Design/Specification - MLV Change To Lead Free 19/Feb/2016
PCN Part Number - MLV Suffix Chgs 15/May/2020
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Central Semiconductor
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
EU2B-YS3203F
Idec
ROTARY SWITCH;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Rectron
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
International Semiconductor
B57237-S509-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 170 Cel; Thermistor Application: SOFT START; Shape (Package): DISK PACKAGE;
MF-MSMF075/24-2
Bourns
The Bourns MF-MSMF075/24-2 is a PTC resettable fuse with resistance of 0.11 ohm, operating voltage of 24V, and max temp of 85°C. It is used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style.
1206L005/60WR
Littelfuse
Littelfuse 1206L005/60WR is a PTC resettable fuse with 3.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style. With a temperature range of -40 to 85°C, it meets CUL, TUV, and UL standards.
RF1344-000
TE Connectivity
PTC RESETTABLE FUSE;
NTC0805J6K8
TE Connectivity's NTC0805J6K8 is a 6800 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 3850 K and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, this surface mount device comes in a rectangular package with dual-ended terminals.
RF2487-000
TE Connectivity's RF2487-000 is a PTC resettable fuse with 0.11 ohm resistance, suitable for overcurrent protection applications. Featuring dual-ended terminals and SMT package style, it operates at -40 to 85°C with a max voltage of 33V. Compliant with CSA, TUV, and UL standards, this surface-mount device measures 4.83mm x 3.41mm x 1.46mm.
B59955C0120A070
TDK
The TDK B59955C0120A070 is a PTC thermistor with resistance of 0.8 ohm, rated for 30V AC/DC. It is used for overcurrent protection in radial disk package, operating b/w -40°C to 125°C. Ideal for through-hole mounting applications requiring high temperature tolerance and strip pack packaging.
NCU18XH103F60RB
Murata Manufacturing
Murata Manufacturing's NCU18XH103F60RB is a 10000 ohm NTC thermistor with 1% tolerance. It operates at -40 to 125 °C, suitable for temperature sensing applications. With dual-ended terminals and SMT package style, it offers high thermal sensitivity index of 3380 K.
RXEF250-AP
TE Connectivity's RXEF250-AP is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 2.5W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C, featuring radial terminal placement in disk package shape.
ERTJ1VT472J
Panasonic
Panasonic ERTJ1VT472J is a 4700 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 4450 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications, this SMT resistor features dual-ended terminals in a rectangular package.
RUEF250U
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Package Style (Meter): Radial;
TO103J2K
Us Sensor
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %; No. of Terminals: 2;
MINISMDC075F/24-02
TE Connectivity's MINISMDC075F/24-02 is a PTC resettable fuse with resistance of 0.29 ohm and operating voltage of 24V. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. With dimensions of 4.83mm x 3.41mm x 1.3mm, it operates b/w -40°C to 85°C and meets CSA, TUV, and UL standards.
EZJZ0V220HA
The Panasonic EZJZ0V220HA is a VARISTOR resistor with dual-ended terminals, suitable for surface mount applications. It has a max operating temperature of 85°C and can handle an operating voltage of 13V. With a rectangular package style and wraparound terminals, it is ideal for circuit protection in various electronic devices.
B57236S0259M000
B57236S0259M000 by TDK is a NTC resistor with 2.5 ohm resistance and 20% tolerance. It is used for soft start applications, with a rated temperature of 25°C and max operating temperature of 170°C. The thermistor has radial terminal placement, disk package shape, and can handle up to 265V AC voltage.
MF-R050-AP-17
Bourns MF-R050-AP-17 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and max temp of 85°C. Ideal for overcurrent protection in various applications due to radial terminal placement and matte tin finish. CUL, TUV, UL certified for quality assurance.
CL-60
Amphenol
The Amphenol CL-60 is a NTC thermistor with 10 ohm resistance and 25% tolerance. It is designed for overload protection applications, featuring radial terminal placement and disk package shape. With a thermal sensitivity index of 888 K, it operates b/w -50 to 175 °C effectively.
60R185XMR
60R185XMR by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm and operating voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. The thermistor has a max operating temperature of 85°C and min of -40°C, meeting CUL, TUV, and UL standards.
MF-PSMF010X-2
The Bourns MF-PSMF010X-2 is a PTC resettable fuse with a resistance of 1 ohm. It is used for overcurrent protection in various applications. With its dual-ended terminal placement and rectangular package shape, it offers easy surface mounting and operates within a temperature range of -40 to 85 °C.
B57703-M103-G40
B57703-M103-G40 by TDK is a NTC thermistor with 10000 ohm resistance, 2% tolerance, and 3988 K thermal sensitivity index. It is used for temperature sensing applications with a rated temperature range of -55 to 125 °C. The thermistor has a chassis mount design with radial terminal placement and flexible wire terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V5.5MLA0603NH
V5.5MLA0603NH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy absorption capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is ideal for surge protection in SMT applications at temperatures ranging from -40°C to 125°C.
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Operating Voltage: 5.5 V; Terminal Placement: DUAL ENDED;
V5.5MLA0603H
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 150 Cel; JESD-609 Code: e3;
V5.5MLA0603H by Littelfuse is a chip varistor with a max operating temperature of 125°C and rated power dissipation of 0.05W. It is used for surge protection in electronic circuits with an operating voltage of 5.5V and max circuit RMS voltage of 6.5V, making it suitable for surface mount applications.
V5.5MLA0603NHAUTO
V5.5MLA0603NHAUTO by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy absorption capacity. It has DUAL ENDED terminals, METAL OXIDE technology, and is designed for automotive applications meeting AEC-Q200 standards.
V5.5MLA0805NH
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Rated AC Voltage (URac): 4 V; Package Style (Meter): SMT; JESD-609 Code: e3;
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.05 mm; JESD-609 Code: e3;
V5.5MLA0603H23
VARISTOR;
V5.5MLA0805LNH
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Maximum Circuit RMS Voltage: 4 V; Minimum Operating Temperature: -40 Cel;
V5.5MLA0805NHAUTO
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -40 Cel;
V5.5MLA0805LNHAUTO
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Packing Method: TR, EMBOSSED PLASTIC, 7 INCH; Package Style (Meter): SMT; Length (Package): 2.01 mm;
V5.5MLA0603NHX2888
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 150 Cel; No. of Terminals: 2; Shape (Package): RECTANGULAR PACKAGE;
V5.5MLA1206H
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Technology: METAL OXIDE FILM;
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit RMS Voltage: 4 V; JESD-609 Code: e3;
V5.5MLA0805H
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Shape (Package): RECTANGULAR PACKAGE;
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Technology: METAL OXIDE FILM; Package Style (Meter): Chip / Die;
V5.5MLA1206H23
V5.5MLA1206H23 by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.4J energy absorption capacity. It has DUAL ENDED terminals, SMT package style, and is suitable for surge protection in electronics with max circuit RMS voltage of 4V.
Intersil
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Terminal Shape: WRAPAROUND; Operating Voltage: 5.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved