Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's NCP18XH103F03RB is a 10000 ohm NTC thermistor with dual-ended terminals, SMT package style, and 1% tolerance. It is used for temperature sensing applications with an operating voltage of 5V and a thermal sensitivity index of 3380K. The thermistor has a max operating temperature of 125°C and min of -40°C, making it suitable for various temperature monitoring systems.
Median Price
$0.080
Lifecycle Status
Suppliers In-Stock
58
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.100
100+ parts
$0.095
1k+ parts
10k+ parts
-
Distrelec
$0.152
$0.130
$0.108
$0.098
Mouser Electronics
$0.160
$0.119
$0.082
$0.073
Master Electronics
$0.172
$0.091
$0.067
DigiKey
$0.180
$0.118
Arrow
$0.029
Verical
TTI Europe
$0.045
Avnet
$0.061
Future Electronics
$0.065
TTI
$0.072
Element14
$0.136
$0.122
$0.115
Farnell
$0.068
Chip1Stop
$0.075
$0.064
$0.048
RS (Exports)
$0.094
$0.089
Ozdisan Elektronik
$0.043
Greenchips
$0.050
$0.047
$0.041
TME
$0.090
$0.070
$0.036
$0.027
DF Sales Co.
Nova Conductors
$0.129
Component Electronics Inc.
$0.230
$0.170
$0.150
IBS Electronics
$0.449
Rutronik
$0.028
Chip Stock
NAC Semi
$0.154
Vyrian
Diverse Electronics
ComSIT USA
Bristol Electronics
Netsource Technology, Inc.
Cyclops Electronics Ltd
Semtec, LLC
Semi Source
Rapid Electronics
Rebound Electronics
PC Components Company LLC
Prism Electronics
Component Sense
Elcom Components
Micros sp.j. W. Kędra i J. Lic
$0.096
$0.044
HZD GmbH
EMSNET
BCID Electronics Ltd.
Classic Components Corporation
Pegasus Components GmbH
A2Z Electronics, Inc.
Contempo Components LLC
SIE Connect GmbH - GreenChips
Flex Direct, LLC
Micros
$0.059
Partservice
$0.093
Martec Srl
Connect4Technologies Inc.
ComSIT Distribution GmbH
Electronics Depot
Atlantic Semiconductor
Bas Electronics GmbH & Co. KG
Semicontronic
$0.038
$0.037
Argo Parts USA
$0.086
Modulus Dynamics
$0.097
Corohmni
Advanced Electronics
Aranea Global
$0.126
$0.121
CoreStaff
$0.166
$0.081
$0.035
Aztec Data Supply Inc.
$0.373
Abacus Technologies
GreenTree Electronics
$0.042
A-Z Elektronik GmbH
iodParts Technologies Inc.
S.R.D Solutions
Infinite Electronics LLP (Excess)
Robosynatics
Lucentia Tech
Cyclops Electronics Ltd (Excess)
Assy Fe
Eastek
Kepictronics
Continental Prestige Electronics
$0.052
Component Connect
This thermistor is specifically designed for temperature sensing applications, making it a reliable choice for monitoring and controlling temperature in various systems.
With a resistance of 10000 ohms, this thermistor offers a stable and accurate resistance value for temperature measurement, ensuring precise readings.
The low operating voltage of 5V makes this thermistor suitable for use in a wide range of electronic circuits and systems without requiring high power consumption.
With a maximum operating temperature of 125°C, this thermistor can withstand higher temperature environments, making it versatile and durable.
The SMT package style allows for easy surface mounting on PCBs, saving space and simplifying the assembly process.
The high thermal sensitivity index of 3380 K indicates that this thermistor can quickly and accurately respond to temperature changes, providing precise temperature measurements.
Non-linear Resistors NCP18XH103F03RB attributes and parameters. Explore more Non-linear Resistors devices from Murata Manufacturing
Maximum Circuit DC Voltage:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
Operating Voltage:
NCP18XH103F03RB Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
Semicoa
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NTCG103JF103FT1
TDK
NTCG103JF103FT1 by TDK is a 10000 ohm NTC thermistor with 1% tolerance, operating at -40 to 125 °C. It has a rated power dissipation of 0.1 W and is used in temperature sensing applications due to its thermal sensitivity index of 3435 K.
B59850-C120-A70
Siemens
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; No. of Terminals: 2; Rated AC Voltage (URac): 265 V; Thermistor Application: OVERLOAD PROTECTION;
NTCS0805E3472FMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MF-R050-AP-17
Bourns
Bourns MF-R050-AP-17 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and max temp of 85°C. Ideal for overcurrent protection in various applications due to radial terminal placement and matte tin finish. CUL, TUV, UL certified for quality assurance.
SMD050F-2
TE Connectivity
TE Connectivity's SMD050F-2 is a surface mount PTC thermistor with a rectangular package and dual terminal placement. It offers overload protection, operates b/w -40°C to 85°C, and has a rated power dissipation of 1.5W.
0603ESDA-MLP7
Eaton Corporation
0603ESDA-MLP7 by Eaton Corp is a VARISTOR with 30V operating voltage. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and SMT package style. Ideal for AEC-Q200 compliant applications requiring surge protection in automotive electronics.
TMOV14RP320E
Littelfuse
TMOV14RP320E by Littelfuse is a VARISTOR with 320V RMS voltage and 136J energy capacity. It operates b/w -55°C to 125°C, ideal for SURGE PROTECTION in various applications. With radial terminal placement and metal oxide film technology, it offers reliable protection against electrical surges.
NTC0805J10K
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
MINIASMDC050F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 24 V; Package Style (Meter): SMT;
MICROASMD050F-2
MICROASMD050F-2 by Littelfuse is a PTC resettable fuse with a resistance of 0.25 ohm and operating voltage of 13.2V. It is used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mounting type.
NTCS0603E3103JLT
Vishay Intertechnology's NTCS0603E3103JLT is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3435 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its dual-ended terminal placement and surface mount package style. The thermistor has a rated temperature range from -40°C to 150°C, making it suitable for various environmental conditions.
MINISMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; No. of Terminals: 2;
MF-MSMF010-2
Bourns MF-MSMF010-2 is a PTC resettable fuse with 0.7 ohm resistance, 60V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in automotive applications due to AEC-Q200 compliance and -40 to 85°C operating temperature range. SMT package style with gold over nickel terminal finish ensures reliable surface mount installation.
B72207-S251-K101
The TDK B72207-S251-K101 is a VARISTOR with 250V RMS and 320V DC max circuit voltage. It has a 19J energy absorbing capacity, suitable for surge protection applications. With radial terminal placement and through hole mounting, it operates b/w -40°C to 85°C effectively.
B72650M0271K072
TDK's B72650M0271K072 is a METAL OXIDE FILM VARISTOR with 8.6J energy capacity, 275V RMS voltage, and 350V operating voltage. Ideal for surge protection in electronics, it has DUAL terminals and operates b/w -40°C to 85°C in surface mount applications.
RXEF005-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Shape (Package): DISK PACKAGE; Rated AC Voltage (URac): 60 V;
1210L020WR
1210L020WR by Littelfuse is a PTC resettable fuse with resistance of 0.8 ohm, operating voltage of 30V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and matte tin finish.
MF-USMF150-2
MF-USMF150-2 by Bourns is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
250S130DR
250S130DR by Littelfuse is a PTC resettable fuse with resistance of 4 ohm and rated AC voltage of 250V. It features dual-ended terminal placement in a rectangular SMT package, suitable for surface mount applications. With operating voltage of 60V and temperature range from -40 to 85 °C, it meets CUL, TUV, and UL standards.
GMOV-14D271K
Bourns GMOV-14D271K is a metal oxide varistor with max energy absorption of 155 J. It is used for overload protection in applications with max circuit RMS voltage of 275 V and operating voltage of 350 V. Its radial terminal placement and through hole mounting make it easy to install.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP15XH103F03RC
Murata Manufacturing
Murata Manufacturing's NCP15XH103F03RC is a Non-linear Resistor with 10000 ohm resistance, -40 to 125 °C operating temperature range, and 1% tolerance. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in RECTANGULAR PACKAGE.
NCP18XH103J03RB
Murata Manufacturing's NCP18XH103J03RB is a Non-linear Resistor with 10000 ohm resistance, 5% tolerance, and -40 to 125 °C operating temperature range. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE.
NCP15XH103J03RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; JESD-609 Code: e3;
NCP15WF104F03RC
Murata Manufacturing's NCP15WF104F03RC is a Non-linear Resistor with 100000 ohm resistance, 1% tolerance, and 5V operating voltage. It is used for TEMPERATURE SENSING applications due to its high thermal sensitivity index of 4250 K and wide temperature range from -40°C to 125°C. The thermistor features dual-ended terminals in a surface mount package style for easy installation.
NCP18WF104J03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Terminal Shape: WRAPAROUND;
NCP18XH103F0SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
NCP18XQ102J03RB
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
NCP18WF104F12RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Shape (Package): RECTANGULAR PACKAGE;
NCP18XW472J03RB
NCP18XW472J03RB by Murata Manufacturing is a non-linear resistor used for temperature compensation. It has a resistance of 4700 ohm, operating voltage of 5V, and max operating temperature of 125°C. Its dual-ended terminal placement and rectangular package make it suitable for surface mount applications.
NCP18WM154J03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Width (Package): .8 mm;
NCP18WM474J03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Operating Voltage: 5 V;
NCP18XH103D03RB
Murata Manufacturing's NCP18XH103D03RB is a Non-linear Resistor with 10000 ohm resistance, -40 to 125 °C operating temp range, and 5 V operating voltage. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE.
NCP18XV103J03RB
Murata Manufacturing's NCP18XV103J03RB is a Non-linear Resistor with 10000 ohm resistance, operating voltage of 5 V, and thermal sensitivity index of 3900 K. It is used for temperature sensing applications with a max operating temperature of 125 °C and min of -40 °C. The thermistor has dual-ended terminals in a rectangular SMT package.
NCP18WM154E03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %; Operating Voltage: 5 V;
NCP15XH103E03RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %; Length (Package): 1 mm;
NCP18XH103J0SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
NCP18XW223J03RB
NCP18XW223J03RB by Murata is a Non-linear Resistor with 22000 ohm resistance, -40 to 125 °C operating temperature range, and 5% tolerance. It is used for TEMPERATURE SENSING applications, featuring DUAL ENDED terminals in a RECTANGULAR PACKAGE suitable for SURFACE mounting.
NCP18WB473F10RB
Murata Manufacturing's NCP18WB473F10RB is a Non-linear Resistor with 47000 ohm resistance, 1% tolerance, and operating voltage of 5V. It is used for TEMPERATURE SENSING applications due to its NTC THERMISTOR type and thermal sensitivity index of 4050 K. The thermistor has DUAL ENDED terminals in a RECTANGULAR PACKAGE suitable for SURFACE mounting.
NCP18WB473K03RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved