Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Height (Package): 1.8 mm; Maximum Energy Absorbing Capacity: .8 J; Package Style (Meter): SMT;
Median Price
$0.462
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.307
100+ parts
$0.239
1k+ parts
$0.190
10k+ parts
-
Adafruit Industries
$0.542
Newark
$0.638
$0.540
$0.501
Mouser Electronics
$1.110
$0.641
$0.574
$0.473
DigiKey
$0.640
$0.579
Verical
$0.176
TTI Europe
$0.137
TTI
$0.374
Farnell
$0.569
$0.371
$0.340
Element14
$0.821
$0.712
$0.645
Arrow
RS (Exports)
$0.245
Chip1Stop
$0.421
NEP Electronics
Maritex
$0.455
$0.233
$0.167
$0.154
TME
$0.510
$0.260
$0.187
$0.173
Nova Conductors
$0.531
Vyrian
Bristol Electronics
$0.338
$0.252
$0.234
Dan-Mar Components
IBS Electronics
$0.174
NAC Semi
$0.372
Rutronik
$0.122
ACDS - Activité Composants Distribution Service
Classic Components Corporation
Zilex Electronics Inc.
ComSIT Distribution GmbH
ComSIT USA
Component Sense
Semicontronic
$0.116
$0.113
Corohmni
$0.153
Aztec Data Supply Inc.
$0.394
Argo Parts USA
$0.526
Netroflash
$0.504
$0.494
Advanced Electronics
CoreStaff
$1.258
$0.525
$0.477
Perfect Parts
Metaverse IC Inc.
Continental Prestige Electronics
$0.446
$0.381
Authorized Procurement Solutions
Glotronic Ltd.
GreenTree Electronics
Kepictronics
Non-linear Resistors V33MLA1206NH attributes and parameters. Explore more Non-linear Resistors devices from Harris Semiconductor
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated AC Voltage (URac):
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V33MLA1206NH Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Design/Specification - MLV Change To Lead Free 19/Feb/2016
PCN Part Number - MLV Suffix Chgs 15/May/2020
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zowie Technology
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
Bytesonic Electronics
Taiwan Semiconductor
Z250PA40C
Cke
VARISTOR; Mounting Type: CHASSIS MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 330 V; Minimum Operating Temperature: -40 Cel; Shape (Package): CYLINDRICAL PACKAGE;
RXEF050S
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; Minimum Operating Temperature: -40 Cel; Additional Features: 0.5-0.77 OHMS AT 20 DEG CEL;
NANOSMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.4 mm;
B57332V5103F360
TDK
B57332V5103F360 by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3455 K thermal sensitivity index. It is used for temperature compensation in various applications due to its dual-ended terminal placement and surface mount package style. Operating b/w -40°C to 150°C, it meets AEC-Q200 and UL standards.
NB12K00103JBB
KYOCERA AVX
NB12K00103JBB by KYOCERA AVX is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 0.12 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and rectangular package shape. Operating b/w -55°C to 150°C, it offers high thermal sensitivity index of 3630 K.
B72210S0171K101
B72210S0171K101 by TDK is a VARISTOR with 175V RMS and 225V DC max circuit voltage. It has a 28J energy capacity, -40 to 105°C operating temp range, and radial package style. Ideal for surge protection in various applications like power supplies and industrial equipment.
MF-R110-0
The Bourns MF-R110-0 is a PTC resettable fuse with resistance of 0.1 ohm, operating voltage of 30V, and dimensions of 24.2mm x 3mm x 32.9mm. It is used in applications requiring overcurrent protection in electronic circuits due to its non-linear resistor properties and radial terminal placement for through-hole mounting.
NTCALUG02A103FL
Vishay Intertechnology
Vishay Intertechnology's NTCALUG02A103FL is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3435 K and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, it features radial terminal placement in a disk package suitable for chassis mounting.
RUEF250U-2
The Littelfuse RUEF250U-2 is a PTC resettable fuse with resistance of 0.02 ohm, suitable for overcurrent protection applications. It has a max operating temperature of 85°C and operates at 30V DC/RMS voltage. With radial terminal placement and rectangular package shape, it is designed for through-hole mounting in various electronic circuits.
B57237-S220-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 22 ohm; Maximum Operating Temperature: 170 Cel; Shape (Package): DISK PACKAGE; No. of Terminals: 2;
NTCG163JF103FT1
NTCG163JF103FT1 by TDK is a 10000 ohm NTC thermistor with 1% tolerance, suitable for temperature sensing applications. It operates b/w -40 to 125 °C and has a thermal sensitivity index of 3435 K. This chip resistor features dual-ended terminals in a rectangular SMT package.
ERTJ1VG103FA
Panasonic
Panasonic ERTJ1VG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and SMT package style. With a thermal sensitivity index of 3435 K, it operates b/w -40 to 125 °C.
LVR025K-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.3 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Circuit DC Voltage: 240 V;
MINISMDC075F/24-02
TE Connectivity
TE Connectivity's MINISMDC075F/24-02 is a PTC resettable fuse with resistance of 0.29 ohm and operating voltage of 24V. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. With dimensions of 4.83mm x 3.41mm x 1.3mm, it operates b/w -40°C to 85°C and meets CSA, TUV, and UL standards.
V33MLA1206NHAUTO
Littelfuse V33MLA1206NHAUTO is a varistor with 33V operating voltage and 0.8J energy capacity. Ideal for automotive applications, it has dual-ended terminals, metal oxide technology, and AEC-Q200 standard compliance.
RXEF010-1
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Thermistor Application: TEMPERATURE SENSING; Terminal Shape: WIRE;
ERTJ1VS104JA
Panasonic ERTJ1VS104JA is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K and operating temperatures ranging from -40 to 125 °C.
RF1351-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: MINIMUM RESISTANCE IS 2.10 OHMS; Rated AC Voltage (URac): 30 V; Package Style (Meter): SMT;
B72214-S271-K101
TDK's B72214-S271-K101 varistor has a max energy capacity of 71J, operating voltage of 350V, and max circuit RMS voltage of 275V. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
MOV-10D201KTR
MOV-10D201KTR by Bourns is a VARISTOR with 30J energy capacity, 130V RMS voltage, and 170V operating voltage. It is used for surge protection in applications requiring high transient suppression capabilities. The device has radial terminal placement, metal oxide film technology, and a disk package shape.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V33MLA1206NH
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 1.65 mm; Maximum Circuit RMS Voltage: 26 V; Height (Package): 1.8 mm;
V33MLA1206H
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Packing Method: TR, PLASTIC, 7 INCH;
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Operating Voltage: 33 V; Maximum Energy Absorbing Capacity: .8 J;
V33MLA1206NA
V33MLA1206NA by Littelfuse is a VARISTOR with a max operating voltage of 33V and max energy absorbing capacity of 0.8J. It is used for surge protection in electronic circuits, offering dual-ended terminal placement and surface mount mounting type.
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Height (Package): 1.8 mm; Maximum Circuit DC Voltage: 33 V; Rated AC Voltage (URac): 26 V;
V33MLA1206NT
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Voltage: 33 V; Terminal Finish: MATTE TIN OVER NICKEL; No. of Terminals: 2;
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 33 V; Width (Package): 1.65 mm; JESD-609 Code: e3;
V33MLA1206NHX3080
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -55 Cel; Rated Temperature: 125 Cel;
V33MLA1206NR
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Energy Absorbing Capacity: .8 J; Operating Voltage: 33 V; Technology: METAL OXIDE FILM; JESD-609 Code: e3;
V33MLA1206H23
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Terminal Placement: DUAL ENDED; Maximum Circuit DC Voltage: 33 V;
V33MA1B
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Package Style (Meter): Axial; Diameter (Package): 3 mm; Terminal Finish: TIN;
V33MLA120623
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Height (Package): 1.8 mm; Terminal Shape: WRAPAROUND;
V33MLA1206HX3080
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Maximum Circuit DC Voltage: 33 V; Terminal Shape: WRAPAROUND;
V33MLA1206
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; No. of Terminals: 2; Maximum Energy Absorbing Capacity: .8 J;
V33MLA1206A
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit RMS Voltage: 26 V; Operating Voltage: 33 V;
V33MLA1206N
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Terminal Placement: DUAL ENDED; Minimum Operating Temperature: -55 Cel;
V33MA1A
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 23 V; Terminal Placement: AXIAL; Terminal Finish: TIN;
V33MA1S
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Operating Voltage: 26 V; Technology: METAL OXIDE; No. of Terminals: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved