Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's NTCALUG01T103G501 is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and chassis mount package. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, meeting AEC-Q200, CUL, and UL standards.
Median Price
$4.570
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Arrow
1+ parts
$3.460
100+ parts
$2.870
1k+ parts
$2.664
10k+ parts
-
Farnell
$3.980
$2.630
$2.330
$2.280
DigiKey
$3.568
$3.074
Mouser Electronics
$3.320
$2.990
Newark
$5.160
$3.910
$3.520
Chip1Stop
$5.765
$3.496
Element14
$6.340
$5.340
Verical
Nova Conductors
$2.944
Chip Stock
Vyrian
NAC Semi
$5.110
Bristol Electronics
$1.882
$1.747
IBS Electronics
$3.871
LIBRA Elektronik GmbH
Corohmni
$0.071
Aztec Data Supply Inc.
$0.300
Semicontronic
$2.500
$2.438
$2.425
Argo Parts USA
Netroflash
$2.797
$2.738
Continental Prestige Electronics
$6.050
$3.640
Microchip USA
$16.740
$16.500
$16.390
$16.270
Robosynatics
Lucentia Tech
$0.121
$0.118
Futuretech Components
Perfect Parts
High resistance value allows for accurate temperature sensing capabilities.
Can withstand high temperatures, making it suitable for challenging environments.
High thermal sensitivity index ensures quick and accurate response to temperature changes.
Can operate in very low temperatures, providing versatility in temperature sensing applications.
Chassis mount package style allows for easy installation and secure mounting on a chassis.
Low tolerance ensures high precision in temperature sensing measurements.
Non-linear Resistors NTCALUG01T103G501 attributes and parameters. Explore more Non-linear Resistors devices from Vishay Intertechnology
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
NTCALUG01T103G501 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Assembly/Origin - NTCALUG Series Supplier 09/Nov/2022
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Pulse Electronics
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
175-104LAF-301
175-104LAF-301 by Honeywell is a NTC thermistor with 100000 ohm resistance, ideal for temperature sensing applications. It comes in a rectangular package with wraparound terminals for surface mounting. With a thermal sensitivity index of 3800 K, it operates b/w -40 to 150 °C effectively.
55015
Ysi
NTC THERMISTOR; No. of Terminals: 2;
PESD0402-140
TE Connectivity
TE Connectivity's PESD0402-140 is a VARISTOR with 14V operating voltage. It comes in a RECTANGULAR PACKAGE measuring 1.1mm x 0.6mm x 0.43mm, suitable for SURFACE MOUNT applications where protection against transient overvoltage is needed at temperatures ranging from -40°C to 85°C.
RF2649-000
TE Connectivity's RF2649-000 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 2.5W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape for through hole mounting.
1206L035/16YR
Littelfuse
Littelfuse 1206L035/16YR is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 16V, and max temp of 85°C. It is used for overcurrent protection in surface mount applications with dual-ended terminals and rectangular package shape.
B72520T0300K062
TDK
B72520T0300K062 by TDK is a VARISTOR with 30V max circuit RMS voltage and 1.1J energy absorbing capacity. It has dual-ended terminals, SMT package style, and operates b/w -55°C to 150°C. Ideal for surge protection in electronic circuits requiring high reliability and compact design.
RUEF135-2
The Littelfuse RUEF135-2 is a PTC resettable fuse with a resistance of 0.13 ohm and rated AC voltage of 30V. It is used for temperature sensing applications, with a max operating temperature of 85°C and min operating temperature of -40°C. Its terminal placement is radial and it has a rectangular package shape.
MF-R010-2
Bourns
The Bourns MF-R010-2 is a PTC resettable fuse with 2.5 ohm resistance and 60V operating voltage. It has radial terminal placement, wire-shaped terminals, and operates b/w -40 to 85°C. Ideal for overcurrent protection in various electronic applications due to its compact disk package design.
V33ZA1P
V33ZA1P by Littelfuse is a varistor with 20V max circuit RMS voltage and 1.2J energy capacity. It operates b/w -55°C to 125°C, suitable for surge protection in electronic circuits. With radial terminal placement and metal oxide film technology, it offers reliable performance in through-hole mounting applications.
USP10975
Littelfuse USP10975 NTC Thermistor has 10000 ohm resistance with 1% tolerance. It is a chassis mount device with flexible wire terminals, operating b/w -55 to 125 °C. Ideal for temperature sensing applications due to its high thermal sensitivity index of 3892 K.
ERTJ1VR103J
Panasonic
Panasonic ERTJ1VR103J is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4300 K. The dual-ended rectangular package with SMT style and tin finish is suitable for surface mounting method.
PFMF.020.2
Schurter Ag
Schurter Ag's PFMF.020.2 is a PTC resettable fuse with resistance of 0.4 ohm, rated AC voltage of 30V, and operating temperature range from -40 to 85 °C. It is used for temperature sensing applications in surface mount installations with dual-ended terminals and wraparound shape.
ASMD150F/33-2
TE Connectivity's ASMD150F/33-2 is a PTC resettable fuse with resistance of 0.068 ohm, operating voltage of 33V, and dual-ended terminal placement. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and min of -40°C. This SMT package features flat terminals and meets AEC-Q200 and TS 16949 standards.
ZNI1000TA
ZNI1000TA by Diodes Inc. is a PTC thermistor with 1141 ohm resistance, rated power dissipation of 0.02W, and max operating temp of 150°C. Ideal for temperature compensation applications in surface mount configurations.
B57421V2103J062
The TDK B57421V2103J062 is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 0.21 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 3980 K and operating temperature range from -55 to 125 °C. The dual-ended rectangular package with SMT style makes it suitable for surface mount installations.
1206L016WR
1206L016WR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 30V, ideal for overcurrent protection applications. Featuring dual-ended terminals and surface mounting type, it has a compact package style (SMT) with dimensions of 3.4mm x 1.8mm x 1.45mm (LxWxH). Compliant with CUL, TUV, and UL standards, it operates b/w -40°C to 85°C temperature range.
B72210S0301K101
B72210S0301K101 by TDK is a VARISTOR with 47J energy capacity, 300V RMS voltage, and 385V operating voltage. It is used for surge protection in applications requiring high reliability and durability. With radial terminal placement and metal oxide technology, it offers robust protection against electrical surges.
B72210P2271K101
B72210P2271K101 by TDK is a VARISTOR with 275V RMS and 350V DC max circuit voltage. It has METAL OXIDE FILM tech, RADIAL terminal placement, and 60J energy absorption. Ideal for surge protection in applications requiring high operating temperatures up to 85°C.
NTCS0603E3103GMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %;
V250LA20AP
V250LA20AP by Littelfuse is a VARISTOR with 250V URac and 330V operating voltage. It has a max energy absorption of 72J, ideal for TEMPERATURE COMPENSATION applications. With radial terminal placement and metal oxide film technology, it operates b/w -55°C to 125°C effectively.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTCALUG02A103F
Vishay Intertechnology
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; No. of Terminals: 2;
NTCALUG01A103F161A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Thermal Sensitivity Index: 3984 K;
NTCALUG01T103G501A
Vishay Intertechnology's NTCALUG01T103G501A is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and 2% tolerance. Ideal for temperature sensing applications, it has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Packaged in chassis mount style, it meets AEC-Q200, CUL, and UL standards.
NTCALUG02A103G
Vishay Intertechnology's NTCALUG02A103G is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and disk package shape. It has a thermal sensitivity index of 3984 K and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, it features tin terminal finish and chassis mount packaging.
NTCALUG01A103F
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Height (Package): 15.7 mm;
NTCALUG02A103FLA
Vishay Intertechnology's NTCALUG02A103FLA is a non-linear resistor with a resistance of 10000 ohm and a thermal sensitivity index of 3435 K. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -55 °C.
NTCALUG01A103F161
Vishay Intertechnology's NTCALUG01A103F161 is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, it features radial terminal placement and tin finish, suitable for chassis mount installations.
NTCALUG02A103FL
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Length (Package): 8.5 mm;
NTCALUG01T103GA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %; Reference Standard: AEC-Q200; CUL, UL;
NTCALUG01T103FLA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; No. of Terminals: 2;
NTCALUG02A103FA
Vishay Intertechnology's NTCALUG02A103FA is a non-linear resistor with a resistance of 10000 ohm and a tolerance of 1%. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -55 °C.
NTCALUG01A103F161L
Vishay Intertechnology NTCALUG01A103F161L is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3435 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, featuring radial terminal placement and chassis mount package style.
NTCALUG01T103G201A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %; Thermal Sensitivity Index: 3984 K;
NTCALUG01A103FA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Terminal Placement: RADIAL;
NTCALUG01A103FLA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Package Style (Meter): Chassis Mount;
NTCALUG03A103GC
Vishay Intertechnology's NTCALUG03A103GC is a non-linear resistor with a resistance of 10000 ohm and a tolerance of 2%. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -40 °C.
NTCALUG01A103F800A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Width (Package): 5.6 mm;
NTCALUG02A103F161
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Width (Package): 4.3 mm;
NTCALUG02A103F161L
NTCALUG01T103F
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Reference Standard: AEC-Q200; CUL, UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved