Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
2920L075/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.3 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals, rectangular package shape, and operates b/w -40°C to 85°C.
Median Price
$0.486
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.094
100+ parts
$0.089
1k+ parts
10k+ parts
-
Arrow
$0.239
Mouser Electronics
$0.670
$0.454
$0.311
RS (Exports)
$0.710
$0.570
Farnell
$0.736
$0.514
$0.376
$0.336
RS Americas
$0.790
$0.750
DigiKey
$0.800
$0.471
$0.324
$0.272
Newark
$0.827
$0.504
$0.425
Element14
$0.970
$0.682
$0.509
Verical
$0.275
Future Electronics
$0.285
$0.280
Chip1Stop
$0.256
$0.242
TTI
$0.227
TTI Europe
$0.303
Nova Conductors
$0.326
TME
$0.540
$0.440
$0.353
IBS Electronics
$1.045
$0.400
Maritex
$1.429
$0.350
$0.216
$0.190
Cyclops Electronics Ltd
Rutronik
$0.175
$0.162
NAC Semi
$0.633
Vyrian
VNN
Bristol Electronics
$0.487
$0.210
$0.195
ComSIT Distribution GmbH
Halfin
Sensible Micro Corp
Inventory MP
Connector Distribution Corp
Right Parts Inc.
ACDS - Activité Composants Distribution Service
EMSNET
Prism Electronics
Advanced Electronics
Semicontronic
$0.174
$0.170
$0.169
Bastille Electronics
$0.310
$0.294
$0.290
Argo Parts USA
$0.316
Aztec Data Supply Inc.
$0.369
Continental Prestige Electronics
$0.445
$0.322
$0.281
Corohmni
$0.477
Perfect Parts
Kepictronics
GreenTree Electronics
Glotronic Ltd.
S.R.D Solutions
Allen Electronics Distributors
Authorized Procurement Solutions
The overcurrent protection feature provides added safety and reliability by automatically limiting current flow during abnormal conditions.
Dual ended terminal placement allows for easy and flexible connections in various circuit configurations.
Rectangular package shape offers space-efficient and versatile mounting options in different devices.
Low resistance value helps in accurately limiting current flow and protecting the circuit from damage.
Suitable for applications requiring protection against overcurrent at voltage levels up to 60 volts.
High maximum operating temperature ensures stable performance even under extreme thermal conditions.
Surface mounting type simplifies installation and allows for compact design integration in modern electronic devices.
Non-linear Resistors 2920L075/60MR attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
2920L075/60MR Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Daco Semiconductor
AB26TRB-32.768KHZ--T
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
S14K275
Infineon Technologies
S14K275 by Infineon Technologies is a VARISTOR with METAL OXIDE FILM tech. It has 71J energy capacity, 275V RMS & 350V DC max circuit voltage. Ideal for THROUGH HOLE MOUNT applications requiring surge protection in various electronic circuits.
RXEF010S
TE Connectivity
TE Connectivity's RXEF010S is a PTC resettable fuse with 7.5 ohm resistance and rated power dissipation of 0.38W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and radial terminal placement for through-hole mounting.
RXEF185K-AP
TE Connectivity's RXEF185K-AP is a PTC resettable fuse with resistance of 0.19 ohm and rated power dissipation of 2.1W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating voltage is 72V with dimensions of 16.76mm x 3mm x 23mm, suitable for through hole mounting in various industries.
VC06AG18120YAT3A
KYOCERA AVX
VC06AG18120YAT3A by KYOCERA AVX is a VARISTOR with 2 terminals, operating voltage of 18V, and max circuit DC voltage of 18V. It has a rectangular SMT package with dual-ended terminal placement for surface mount applications. With an operating temperature range from -55 to 125°C, it offers protection against overvoltage in electronic circuits.
B72220S0251K101
TDK
B72220S0251K101 by TDK is a VARISTOR with 250V max RMS voltage and 320V operating voltage. With a 140J energy absorbing capacity, it's ideal for surge protection in applications requiring non-linear resistors. Its METAL OXIDE technology and radial terminal placement make it suitable for through-hole mounting.
RXEF050S
TE Connectivity's RXEF050S is a PTC resettable fuse with rated AC voltage of 72V. Its dimensions are 7.9mm x 3mm x 13.7mm, suitable for temperature sensing applications. With radial terminal placement and through-hole mounting, it meets CSA, TUV, and UL standards.
B57541G1103F005
B57541G1103F005 by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and rated power dissipation of 0.018 W. It is used for temperature sensing applications with a thermal sensitivity index of 3625 K, operating b/w -55 to 250 °C. The thermistor has radial terminal placement in disk package shape for chassis mounting.
PFMF.020.2
Schurter Ag
Schurter Ag's PFMF.020.2 is a PTC resettable fuse with resistance of 0.4 ohm, rated AC voltage of 30V, and operating temperature range from -40 to 85 °C. It is used for temperature sensing applications in surface mount installations with dual-ended terminals and wraparound shape.
SMD185F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .065 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Length (Package): 9.4 mm;
V5.5MLA0805NH
V5.5MLA0805NH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.3J energy absorption capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is used for surge protection in SMT applications at temperatures ranging from -40°C to 125°C.
MICROSMD005F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 3.6 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: CSA; TUV; UL; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
B57153S0479M051
B57153S0479M051 by TDK is a 4.7 ohm NTC thermistor with 20% tolerance and 1.4 W power dissipation. It features a radial disk package, 25mm lead length, and -55 to 170°C operating temperature range. Primarily used for overload protection due to its thermal sensitivity index of 2800 K.
NCP18XH103J03RB
Murata Manufacturing
Murata Manufacturing's NCP18XH103J03RB is a Non-linear Resistor with 10000 ohm resistance, 5% tolerance, and -40 to 125 °C operating temperature range. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE.
RXEF050-1
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE; No. of Terminals: 2; Terminal Placement: RADIAL;
PTCCL07H411DBE
Vishay Intertechnology's PTCCL07H411DBE is a non-linear resistor with a resistance of 3 ohm and tolerance of 20%. It is used for overload protection in various applications, with a rated AC voltage of 30 V and max operating temperature of 175 °C.
RXEF090
TE Connectivity's RXEF090 is a PTC resettable fuse with resistance of 0.47 ohm and rated power dissipation of 0.99 W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating b/w -40 to 85 °C, it has a rated AC voltage of 72 V.
B57330V2103F260
B57330V2103F260 by TDK is a NTC thermistor with 10000 ohm resistance and 1% tolerance. It has a thermal sensitivity index of 3435 K, making it ideal for temperature compensation applications. With a max operating temperature of 125°C and surface mounting type, this thermistor offers precise and reliable performance in various electronic devices.
B57364-S109-M
B57364-S109-M by TDK is a NTC thermistor with 1 ohm resistance, rated for 265V AC voltage. It has a thermal sensitivity index of 2800K and can operate b/w -55°C to 170°C. Ideal for soft start applications due to its radial terminal placement in disk package.
B72214-S251-K101
The TDK B72214-S251-K101 is a VARISTOR with 65J energy capacity, rated for 250V AC and 320V DC. With METAL OXIDE FILM tech, it operates b/w -40°C to 85°C. Ideal for surge protection in circuits requiring high voltage tolerance.
RXEF185-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Rated AC Voltage (URac): 72 V; Terminal Placement: RADIAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0ZCF0075AF2C
Bel Fuse
2920L500/16MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Operating Voltage: 16 V;
2920L300/15DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Dimensions: 7.98mm x 5.44mm x 1.25mm; Packing Method: TR, 7 INCH;
2920L185DR
2920L185DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it ensures reliable performance in a compact form factor.
2920L150DR
2920L150DR by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm, operating voltage of 33V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and surface mounting type.
2920L050DR
2920L050DR by Littelfuse is a PTC resettable fuse with resistance of 0.35 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. The thermistor has dual-ended terminals, SMT package style, and operates b/w -40°C to 85°C.
2920L150DR-A
2920L150DR-A by Littelfuse is a PTC thermistor with resistance of 0.08 ohm, operating voltage of 33V, and max circuit DC voltage of 33V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type.
2920L110/60MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .12 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 7.98 mm;
2920L110/60MR-A
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .12 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 5.44 mm; Height (Package): 2 mm;
2920L100PR
2920L100PR by Littelfuse is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications. This surface mount device has dual-ended terminals and operates b/w -40 to 85°C.
2920L200/24DR
2920L200/24DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 24V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and wraparound terminal shape. The rectangular package measures 7.98mm x 5.44mm x 1.25mm and can operate b/w -40°C to 85°C temperature range.
2920L330/24MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Finish: MATTE TIN;
2920L500/16MR-A
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Length (Package): 7.98 mm;
2920L150
2920L150 by Littelfuse is a PTC thermistor with 0.08 ohm resistance and 33V operating voltage. It offers overcurrent protection, dual-ended terminals, SMT package style, and matte tin finish. Ideal for applications requiring surface mounting type in a temperature range of -40 to 85°C.
2920L075DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .35 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Circuit DC Voltage: 30 V;
2920L200DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .05 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 7.98 mm;
2920L030DR
2920L030DR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. This thermistor has dimensions of 7.98mm x 5.44mm x 1.25mm and operates b/w -40°C to 85°C.
2920L400/15MR
2920L400/15MR by Littelfuse is a PTC resettable fuse with resistance of 0.01 ohm and operating voltage of 15V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and surface mounting type. This non-linear resistor has a max operating temperature of 85°C and min of -40°C, meeting standards like CUL, TUV, and UL.
2920L700/12MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .003 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Packing Method: TR, 7 INCH;
2920L600/24SLER
2920L600/24SLER by Littelfuse is a PTC resettable fuse with resistance of 0.001 ohm and operating voltage of 24V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and surface mounting type. This SMT package has a rated power dissipation of 2.5W and meets standards like CUL, TUV, UL.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved