Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
2920L500/16MR by Littelfuse is a PTC resettable fuse with resistance of 0.005 ohm and operating voltage of 16V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and surface mounting type. With a compact SMT package style, it ensures reliable performance from -40 to 85°C.
Median Price
$1.182
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.770
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.966
$0.888
$0.833
Chip1Stop
$1.370
$0.633
$0.626
RS Americas
$1.840
$1.470
Mouser Electronics
$1.860
$1.320
$0.910
Newark
$2.040
$1.240
Element14
$2.070
$1.540
$1.480
DigiKey
$2.240
$1.314
$1.088
TTI
$0.860
$0.800
Arrow
$0.992
Verical
$0.995
Farnell
$0.828
$0.699
Component Electronics Inc.
$0.580
$0.500
Nova Conductors
$0.838
TME
$1.740
$1.090
$1.040
Component Sense
Chip Stock
Vyrian
IBS Electronics
$1.473
$1.459
Bristol Electronics
VNN
Rutronik
$1.010
$0.937
NAC Semi
$1.420
$1.280
Semtec, LLC
Semi Source
ACDS - Activité Composants Distribution Service
Prism Electronics
Aztec Data Supply Inc.
$0.303
Decca Corp
$0.640
$0.627
$0.621
Semicontronic
$0.624
Argo Parts USA
Corohmni
Netroflash
Modulus Dynamics
$0.930
$0.921
$0.893
Advanced Electronics
Continental Prestige Electronics
$1.120
$0.811
$0.709
$0.690
CoreStaff
$1.640
$0.666
$0.618
Futuretech Components
Kepictronics
GreenTree Electronics
Perfect Parts
Authorized Procurement Solutions
Allen Electronics Distributors
$1.880
Robosynatics
$1.919
Lucentia Tech
This thermistor provides overcurrent protection, making it a reliable choice for safeguarding electronic circuits from excessive current flow.
The dual-ended terminal placement allows for flexibility in circuit design and easy integration into different electronic systems.
The TR packing method in 7-inch size ensures convenient handling and storage of the thermistors, making them suitable for mass production.
With a low resistance of 0.005 ohm, this thermistor offers efficient current limiting and protection capabilities in the circuit.
The SMT package style makes it easy to mount the thermistor on the surface of the circuit board, saving space and simplifying assembly.
The high maximum operating temperature of 85°C ensures the thermistor can withstand harsh environmental conditions without compromising performance.
The low minimum operating temperature of -40°C allows the thermistor to function effectively in cold environments.
The matte tin terminal finish provides good conductivity and solderability, ensuring reliable connections in the circuit.
The surface mounting type simplifies the assembly process and allows for automated production of electronic devices.
With a maximum DC voltage of 16 V, this thermistor can effectively protect the circuit from overvoltage conditions.
Non-linear Resistors 2920L500/16MR attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
2920L500/16MR Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Design/Specification - 2016L/2920L Through Hole Change Revision 8/Jul/2015
PCN Packaging - 2920L series MSL chg 25/NOV/2019
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitano Enterprise
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Wuxi Xuyang Electronic
Diotec Semiconductor Ag
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Surge Components
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
V18MLA0805LNHAUTO
Littelfuse
V18MLA0805LNHAUTO by Littelfuse is a VARISTOR with 18V operating voltage, 0.1J energy capacity, and 14V RMS circuit voltage. It is used in automotive applications due to AEC-Q200 standard compliance and surface mounting type.
V5.5MLA0603NHX2888
V5.5MLA0603NHX2888 by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy absorption capacity. It has dual-ended terminals, matte tin finish, and operates b/w -55°C to 150°C. Ideal for surface mount applications requiring protection against voltage surges in electronic circuits.
ERTJ0EG103FA
Panasonic
Panasonic ERTJ0EG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in SMT applications due to its dual-ended terminals and compact rectangular package design.
B57237-S509-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 170 Cel; Thermistor Application: SOFT START; Shape (Package): DISK PACKAGE;
V5.5MLA0805NH
V5.5MLA0805NH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.3J energy absorption capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is used for surge protection in SMT applications at temperatures ranging from -40°C to 125°C.
MICROSMD050F-2
TE Connectivity's MICROSMD050F-2 is a PTC resettable fuse with 2 terminals, rated for 13.2V AC voltage and 0.8W power dissipation. It is used for temperature sensing applications, featuring dual-ended terminal placement in a rectangular package suitable for surface mounting at up to 85°C operating temperature.
B57164K0101J000
TDK
B57164K0101J000 by TDK is a NTC thermistor with 100 ohm resistance, 5% tolerance, and 3200 K thermal sensitivity index. It is used for temperature compensation applications with a rated temperature range of -55 to 125 °C. The thermistor has radial terminal placement and matte tin finish, suitable for through hole mounting in various electronic devices.
V42MLA1206H
V42MLA1206H by Littelfuse is a VARISTOR with 30V RMS and 42V DC max circuit voltage. It has 0.8J energy capacity, operates b/w -55°C to 125°C, and uses METAL OXIDE FILM tech. Ideal for surge protection in electronics due to its surface mounting type and dual-ended terminal placement.
PTCCL13H921DBE
Vishay Intertechnology PTCCL13H921DBE is a PTC thermistor with resistance of 0.9 ohm, rated AC voltage of 30 V, and tolerance of 20%. It is used for overload protection in applications requiring radial terminal placement and disk package shape. Operating temperatures range from -40°C to 175°C.
B72520T0500K062
The TDK B72520T0500K062 is a VARISTOR with max. operating voltage of 65V and energy absorption capacity of 0.6J. It has dual-ended terminals, SMT package style, and operates b/w -55 to 150°C. Ideal for surge protection in electronics applications.
2016L050MR-A
PTC RESETTABLE FUSE;
SIOV-S20K275
Infineon Technologies
SIOV-S20K275 by Infineon is a METAL OXIDE FILM VARISTOR with 151J energy capacity. It operates at 350V DC/275V RMS, suitable for THROUGH HOLE MOUNT applications. This non-linear resistor in radial package style with Tin/Lead finish is ideal for surge protection in various electronic circuits.
R2920-150
Optifuse
Optifuse R2920-150 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 33V, and temperature range from -40 to 85°C. It is used for temperature sensing applications with dual-ended terminals in surface mount package style.
MINISMDC030F-2
MINISMDC030F-2 by TE Connectivity is a PTC resettable fuse with operating voltage of 30V. It has dual-ended terminals, rectangular SMT package, and operates b/w -40°C to 85°C. Ideal for temperature sensing applications, it meets CSA, TUV, and UL standards.
MINISMDC075F/24
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; No. of Terminals: 2;
B72220-S250-K101
The TDK B72220-S250-K101 is a VARISTOR with 25V RMS and 31V DC max circuit voltage. It has a 22J energy capacity, -40 to 85°C operating temp range, and RADIAL terminals. Ideal for surge protection in THROUGH HOLE MOUNT applications.
0ZCH0050FF2G
Bel Fuse
Bel Fuse's 0ZCH0050FF2G is a PTC thermistor resistor with dual-ended terminal placement and a matte tin finish. It is used for temperature sensing applications, has a max operating temperature of 85°C, and can handle a max circuit DC voltage of 16V.
ERTJ1VT472J
Panasonic ERTJ1VT472J is a 4700 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 4450 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications, this SMT resistor features dual-ended terminals in a rectangular package.
B72220P3461K101
The TDK B72220P3461K101 is a VARISTOR with 445J energy capacity, 615V operating voltage, and 460V max RMS voltage. Ideal for surge protection in circuits exposed to transient overvoltage events. Suitable for applications requiring high reliability in harsh environments due to its metal oxide film technology and radial terminal placement.
NCP18XQ102J03RB
Murata Manufacturing
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2920L075/60MR
2920L075/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.3 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals, rectangular package shape, and operates b/w -40°C to 85°C.
2920L300/15DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Dimensions: 7.98mm x 5.44mm x 1.25mm; Packing Method: TR, 7 INCH;
2920L185DR
2920L185DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it ensures reliable performance in a compact form factor.
2920L150DR
2920L150DR by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm, operating voltage of 33V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and surface mounting type.
2920L050DR
2920L050DR by Littelfuse is a PTC resettable fuse with resistance of 0.35 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. The thermistor has dual-ended terminals, SMT package style, and operates b/w -40°C to 85°C.
2920L150DR-A
2920L150DR-A by Littelfuse is a PTC thermistor with resistance of 0.08 ohm, operating voltage of 33V, and max circuit DC voltage of 33V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type.
2920L110/60MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .12 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 7.98 mm;
2920L110/60MR-A
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .12 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 5.44 mm; Height (Package): 2 mm;
2920L100PR
2920L100PR by Littelfuse is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications. This surface mount device has dual-ended terminals and operates b/w -40 to 85°C.
2920L200/24DR
2920L200/24DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 24V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and wraparound terminal shape. The rectangular package measures 7.98mm x 5.44mm x 1.25mm and can operate b/w -40°C to 85°C temperature range.
2920L330/24MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Finish: MATTE TIN;
2920L500/16MR-A
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Length (Package): 7.98 mm;
2920L150
2920L150 by Littelfuse is a PTC thermistor with 0.08 ohm resistance and 33V operating voltage. It offers overcurrent protection, dual-ended terminals, SMT package style, and matte tin finish. Ideal for applications requiring surface mounting type in a temperature range of -40 to 85°C.
2920L075DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .35 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Circuit DC Voltage: 30 V;
2920L200DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .05 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 7.98 mm;
2920L030DR
2920L030DR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. This thermistor has dimensions of 7.98mm x 5.44mm x 1.25mm and operates b/w -40°C to 85°C.
2920L400/15MR
2920L400/15MR by Littelfuse is a PTC resettable fuse with resistance of 0.01 ohm and operating voltage of 15V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and surface mounting type. This non-linear resistor has a max operating temperature of 85°C and min of -40°C, meeting standards like CUL, TUV, and UL.
2920L700/12MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .003 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Packing Method: TR, 7 INCH;
2920L600/24SLER
2920L600/24SLER by Littelfuse is a PTC resettable fuse with resistance of 0.001 ohm and operating voltage of 24V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and surface mounting type. This SMT package has a rated power dissipation of 2.5W and meets standards like CUL, TUV, UL.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved