Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
2920L200DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 15V, and max circuit DC voltage of 15V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and rectangular SMT package style.
Median Price
$0.790
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Farnell
1+ parts
$0.458
100+ parts
$0.350
1k+ parts
$0.291
10k+ parts
$0.280
Arrow
$0.648
$0.450
$0.386
$0.276
Element14
$0.493
$0.412
$0.385
Mouser Electronics
$0.820
$0.560
$0.477
$0.367
Newark
$0.934
$0.575
$0.490
-
DigiKey
$0.980
$0.476
Chip1Stop
Verical
$0.591
$0.362
Nova Conductors
$0.381
Bristol Electronics
$0.750
$0.278
TME
$0.770
$0.527
$0.425
$0.293
Component Electronics Inc.
$0.580
$0.500
Maritex
$1.328
$0.316
$0.210
$0.184
Cyclops Electronics Ltd
VNN
Vyrian
IBS Electronics
$0.295
NAC Semi
$0.272
LIBRA Elektronik GmbH
Resion
Ashlea Components Ltd
Speed Components Ltd
Ack Elektronik San.Tic.Ltd.Sti
Manotoh
Semicontronic
$0.221
$0.215
$0.214
Component Stockers USA
$0.250
$0.230
$0.220
$0.290
Corohmni
$0.296
Aztec Data Supply Inc.
$0.330
Argo Parts USA
$0.369
Continental Prestige Electronics
$0.603
$0.420
$0.310
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Kepictronics
Infinite Electronics LLP (Excess)
Robosynatics
Lucentia Tech
Netroflash
$0.373
$0.354
This thermistor is specifically designed for overcurrent protection, ensuring the safety and reliability of the circuit it is used in.
The rectangular package makes it easy to mount and integrate this thermistor into various electronic devices or circuits.
The low resistance of 0.05 ohm allows for accurate and efficient current sensing and protection against overcurrent conditions.
The matte tin terminal finish provides a reliable connection and ensures long-term performance of the thermistor in a circuit.
With an operating voltage of 15 V, this thermistor can effectively protect the circuit from overcurrent conditions without being overloaded.
Non-linear Resistors 2920L200DR attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
2920L200DR Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Design/Specification - 2016L/2920L Through Hole Change Revision 8/Jul/2015
PCN Packaging - 2920L series MSL chg 25/NOV/2019
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
Formosa Microsemi
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Toshiba
Kec
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Digitron Semiconductors
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Nte Electronics
B72214-S321-K101
TDK
The TDK B72214-S321-K101 varistor has a max energy absorption of 84J, operating voltage of 420V, and rated power dissipation of 0.6W. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
B59807A0090A062
TDK B59807A0090A062 is a PTC thermistor with 200 ohm resistance, rated for 265V AC voltage. It is used for overcurrent protection in various applications. Featuring dual-ended terminals and SMT package style, it operates b/w -40°C to 125°C temperature range.
V275LA40APX10
Littelfuse
V275LA40APX10 by Littelfuse is a 275V varistor with 140J energy capacity. It operates b/w -55°C to 125°C, ideal for temperature compensation applications. With radial terminal placement and metal oxide film technology, it offers reliable protection in bulk packaging.
NTCLE400E3472HA
Vishay Intertechnology
Vishay Intertechnology NTCLE400E3472HA is a 4700 ohm NTC thermistor with -40 to 85°C operating range. Featuring 3% tolerance, it has thermal sensitivity index of 3977 K and 0.25 W power dissipation. Ideal for temperature sensing applications, this radial thermistor is chassis mountable with flexible wire terminals.
NTCS0805E3222JMT
Vishay Intertechnology's NTCS0805E3222JMT is a NTC thermistor with 2200 ohm resistance, -40 to 150°C operating range, and 5% tolerance. Ideal for temperature sensing applications, it features dual-ended terminals in a rectangular SMT package. With a thermal sensitivity index of 3600 K, this thermistor offers reliable performance in various environments.
NTHS1206N02N1002KE
Vishay Intertechnology's NTHS1206N02N1002KE is a Non-linear Resistor with 10,000 ohm resistance and 10% tolerance. It is used for TEMPERATURE COMPENSATION applications, featuring a Thermal Sensitivity Index of 3486 K and operating temperature range from -40 to 125 °C. Ideal for surface mounting with dual-ended terminals in a rectangular package.
ERZVF1M330
Panasonic ERZVF1M330 is a VARISTOR with 20V RMS and 26V DC max circuit voltage, used for SURGE PROTECTION. It has a max energy absorption of 1.2J, operates b/w -40°C to 85°C, and features DUAL ENDED terminals in a RECTANGULAR SMT package.
MPTS2920L150
Meritek Electronics
MPTS2920L150 by Meritek Electronics is a PTC thermistor with 1.5W power dissipation, operating b/w -40°C to 85°C. It features dual-ended terminals in a rectangular package for temperature sensing applications. The thermistor has pure tin terminal finish and is surface mountable for easy installation.
DFP10112
DFP10112 by TDK is a PTC resettable fuse with 10 ohm resistance, 5% tolerance, and 1.6W power dissipation. It is used for temperature sensing applications with radial terminal placement in a rectangular package.
MF-NSMF012-2
Bourns
Bourns MF-NSMF012-2 is a PTC resettable fuse with 1.35 ohm resistance, operating at 30V. Its dual-ended terminals and SMT package make it suitable for automotive applications, meeting AEC-Q200, CUL, TUV, and UL standards. With a temperature range of -40 to 85°C, it offers reliable protection in compact dimensions (3.4mm x 1.8mm x 1.1mm).
2920L110/60MR-A
2920L110/60MR-A by Littelfuse is a PTC thermistor with resistance of 0.12 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type.
MF-R030
Bourns MF-R030 is a PTC resettable fuse with resistance of 0.76 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It has radial terminal placement and wire shape, suitable for through hole mounting applications in various electronic circuits.
RXEF250
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Width (Package): 3 mm; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
ERZE14A391
The Panasonic ERZE14A391 is a VARISTOR with 275J energy capacity, 320V operating voltage, and 1W power dissipation. Ideal for surge protection in circuits with max 250V RMS or 320V DC voltages. RADIAL terminal placement and DISK PACKAGE shape make it suitable for THROUGH HOLE MOUNT applications.
TRF250-145
TE Connectivity
TE Connectivity's TRF250-145 is a PTC resettable fuse with 60V operating voltage and 1W power dissipation. Ideal for temperature sensing applications, it features radial terminal placement in a disk package measuring 6.5mm x 4.6mm x 11mm. With CSA, TUV, and UL certifications, it operates b/w -40°C to 85°C.
B72214P2301K101
B72214P2301K101 by TDK is a VARISTOR with 140J energy capacity, 385V operating voltage, and -40 to 105°C temperature range. Ideal for surge protection in electronic circuits due to its METAL OXIDE technology and DUAL ENDED terminal placement in a DISK PACKAGE.
16R400GPR
16R400GPR by Littelfuse is a PTC resettable fuse with a resistance of 0.021 ohm and an operating voltage of 16V. It is used for overcurrent protection in applications such as through hole mounting.
RXEF005
TE Connectivity's RXEF005 is a PTC resettable fuse with 20 ohm resistance and rated AC voltage of 60V. Ideal for temperature sensing applications, it has a max operating temp of 85°C and min of -40°C. With radial terminal placement and disk package shape, it is mounted through hole for bulk packing.
B72214P2271K101
The TDK B72214P2271K101 is a varistor with 130J energy capacity, 275V RMS voltage, and 350V operating voltage. It is used for surge protection in applications requiring high reliability and durability. The varistor has dual-ended terminals, metal oxide technology, and radial package style suitable for through-hole mounting.
B72210-S301-K101
The TDK B72210-S301-K101 is a VARISTOR with 47J energy capacity, 385V operating voltage, and -40 to 85°C temperature range. It has RADIAL terminals and DISK PACKAGE shape, suitable for surge protection in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2920L500/16MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Operating Voltage: 16 V;
2920L075/60MR
2920L075/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.3 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals, rectangular package shape, and operates b/w -40°C to 85°C.
2920L300/15DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Dimensions: 7.98mm x 5.44mm x 1.25mm; Packing Method: TR, 7 INCH;
2920L185DR
2920L185DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it ensures reliable performance in a compact form factor.
2920L150DR
2920L150DR by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm, operating voltage of 33V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and surface mounting type.
2920L050DR
2920L050DR by Littelfuse is a PTC resettable fuse with resistance of 0.35 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. The thermistor has dual-ended terminals, SMT package style, and operates b/w -40°C to 85°C.
2920L150DR-A
2920L150DR-A by Littelfuse is a PTC thermistor with resistance of 0.08 ohm, operating voltage of 33V, and max circuit DC voltage of 33V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type.
2920L110/60MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .12 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 7.98 mm;
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .12 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 5.44 mm; Height (Package): 2 mm;
2920L100PR
2920L100PR by Littelfuse is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications. This surface mount device has dual-ended terminals and operates b/w -40 to 85°C.
2920L200/24DR
2920L200/24DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 24V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and wraparound terminal shape. The rectangular package measures 7.98mm x 5.44mm x 1.25mm and can operate b/w -40°C to 85°C temperature range.
2920L330/24MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Finish: MATTE TIN;
2920L500/16MR-A
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Length (Package): 7.98 mm;
2920L150
2920L150 by Littelfuse is a PTC thermistor with 0.08 ohm resistance and 33V operating voltage. It offers overcurrent protection, dual-ended terminals, SMT package style, and matte tin finish. Ideal for applications requiring surface mounting type in a temperature range of -40 to 85°C.
2920L075DR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .35 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Circuit DC Voltage: 30 V;
2920L030DR
2920L030DR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. This thermistor has dimensions of 7.98mm x 5.44mm x 1.25mm and operates b/w -40°C to 85°C.
2920L400/15MR
2920L400/15MR by Littelfuse is a PTC resettable fuse with resistance of 0.01 ohm and operating voltage of 15V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and surface mounting type. This non-linear resistor has a max operating temperature of 85°C and min of -40°C, meeting standards like CUL, TUV, and UL.
2920L700/12MR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .003 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Packing Method: TR, 7 INCH;
2920L600/24SLER
2920L600/24SLER by Littelfuse is a PTC resettable fuse with resistance of 0.001 ohm and operating voltage of 24V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and surface mounting type. This SMT package has a rated power dissipation of 2.5W and meets standards like CUL, TUV, UL.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved