Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Package Style (Meter): SMT;
Median Price
$0.373
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.510
100+ parts
$0.353
1k+ parts
$0.268
10k+ parts
$0.189
Newark
$0.586
$0.367
$0.293
-
DigiKey
$0.610
$0.356
$0.272
TTI
Arrow
$0.130
Verical
Farnell
$0.285
$0.227
$0.195
Element14
$0.848
$0.629
$0.541
Future Electronics
$0.177
Master Electronics
Chip1Stop
Ozdisan Elektronik
$0.086
Freelance Electronics
$0.213
$0.224
$0.211
Nova Conductors
Bristol Electronics
$0.517
$0.191
$0.134
Chip Stock
Vyrian
Cyclops Electronics Ltd
Dan-Mar Components
Lakeland Logistics Inc
IBS Electronics
$0.278
NAC Semi
$0.327
Flip Electronics
Rapid Electronics
$0.409
Inventory MP
Masline Electronics Inc.
ACDS - Activité Composants Distribution Service
Electronics Depot
Semi Source
Sunrise Surplus Inc.
Sensible Micro Corp
ComSIT Distribution GmbH
Prism Electronics
Speed Components Ltd
EMSNET
PC Components Company LLC
Aztec Data Supply Inc.
$0.050
Semicontronic
$0.097
$0.095
$0.094
Decca Corp
Argo Parts USA
$0.160
$0.155
Corohmni
$0.212
Advanced Electronics
$0.218
$0.207
Netroflash
$0.267
Component Stockers USA
$0.440
$0.270
$0.150
$0.170
Continental Prestige Electronics
$0.763
$0.553
$0.458
$0.404
Perfect Parts
Kepictronics
Assy Fe
Authorized Procurement Solutions
GreenTree Electronics
Glotronic Ltd.
Futuretech Components
Non-linear Resistors NANOSMDC150F-2 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
NANOSMDC150F-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Panjit International
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
RUEF400-AP
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE;
B57364-S109-M
TDK
B57364-S109-M by TDK is a NTC thermistor with 1 ohm resistance, rated for 265V AC voltage. It has a thermal sensitivity index of 2800K and can operate b/w -55°C to 170°C. Ideal for soft start applications due to its radial terminal placement in disk package.
V33MLA1206NH
V33MLA1206NH by Littelfuse is a VARISTOR with 33V operating voltage and 0.8J energy absorption. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and SMT package style. Ideal for surge protection in electronics due to its high energy capacity and surface mounting type.
ERTJ1VS104FA
Panasonic
Panasonic ERTJ1VS104FA is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K. The dual-ended rectangular package with SMT style and wraparound terminals makes it suitable for surface mounting method.
590-33BN01-103
Honeywell Sensing And Control
Honeywell Sensing And Control's 590-33BN01-103 is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3974 K. It is used for temperature sensing applications with a max operating temperature of 125°C and min of -60°C.
RGEF600
TE Connectivity
TE Connectivity's RGEF600 is a PTC resettable fuse with resistance of 0.028 ohm and rated power dissipation of 2.8W. Ideal for temperature sensing applications, it features radial terminal placement in a rectangular package. With CSA, TUV, and UL certifications, it operates b/w -40°C to 85°C.
TRF250-120UT
TE Connectivity's TRF250-120UT is a PTC resettable fuse with 60V operating voltage and 1W power dissipation. Ideal for temperature sensing applications, it features radial terminal placement in a disk package measuring 6mm x 3.8mm x 10mm. Compliant with CSA, TUV, and UL standards, it operates b/w -40°C to 85°C.
LVR100S-240
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .218 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Terminals: 2;
TFPT1206L1002FM
Vishay Dale
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
V5.5MLA0603NHAUTO
V5.5MLA0603NHAUTO by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy absorption capacity. It has DUAL ENDED terminals, METAL OXIDE technology, and is designed for automotive applications meeting AEC-Q200 standards.
NTCLE100E3103JB0
Vishay Intertechnology NTCLE100E3103JB0 is a 10000 ohm NTC thermistor with thermal sensitivity index of 3977 K. It has a rated temperature range from -40 to 125 °C and is used for temperature sensing applications. The thermistor comes in a radial disk package with through hole mounting, making it suitable for various industrial and electronic devices.
RXEF050-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; Terminal Shape: WIRE; JESD-609 Code: e3;
RF1344-000
PTC RESETTABLE FUSE; Terminal Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3;
RUEF250
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .07 ohm; Rated Power Dissipation (P): 1.2 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
NTC0805J100K
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
1206L050/15YR-A
PTC RESETTABLE FUSE;
B72214P2301K101
B72214P2301K101 by TDK is a VARISTOR with 140J energy capacity, 385V operating voltage, and -40 to 105°C temperature range. Ideal for surge protection in electronic circuits due to its METAL OXIDE technology and DUAL ENDED terminal placement in a DISK PACKAGE.
MOV-10D431KTR
Bourns
The Bourns MOV-10D431KTR is a VARISTOR with 65J energy absorption, 275V RMS voltage, and 350V operating voltage. It is used for surge protection in applications requiring high transient energy handling capabilities. With a radial package style and through-hole mounting, it ensures reliable performance in diverse environments.
B72210S0271K101V87
B72210S0271K101V87 by TDK is a VARISTOR with 43J energy capacity, 275V RMS voltage, and 350V operating voltage. It has RADIAL terminals and DISK PACKAGE shape. Ideal for surge protection in electronics due to its high energy absorption and voltage ratings.
NTHS1206N02N1002KE
Vishay Intertechnology's NTHS1206N02N1002KE is a Non-linear Resistor with 10,000 ohm resistance and 10% tolerance. It is used for TEMPERATURE COMPENSATION applications, featuring a Thermal Sensitivity Index of 3486 K and operating temperature range from -40 to 125 °C. Ideal for surface mounting with dual-ended terminals in a rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NANOSMDC016F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 85 Cel; Manufacturer Series: NANOSMD;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; JESD-609 Code: e3;
NANOSMDC012F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Terminal Placement: DUAL ENDED; Thermistor Application: OVERLOAD PROTECTION; Terminal Shape: ONE SURFACE; Additional Features: RESISTANCE MIN IS 1.4 OHMS AT 25 DEG CEL;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.4 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 3.4 mm;
NANOSMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.4 mm;
TE Connectivity's NANOSMDC020F-2 is a PTC resettable fuse with a rated power dissipation of 0.6W and max operating temperature of 85°C. It features dual-ended terminal placement in a rectangular package, suitable for temperature sensing applications at up to 24V AC voltage.
NANOSMDC050F/13.2-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Thermistor Application: OVERCURRENT PROTECTION;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Additional Features: RESISTANCE VARIES FROM 0.2 TO 0.75 OHMS;
NANOSMDC150F-2
NANOSMDC150F-2 by TE Connectivity is a PTC thermistor used for overload protection. It has dual-ended terminal placement and a rectangular package shape. The surface mount resistor has matte tin finish with nickel barrier.
NANOSMDC010F-2
NANOSMDC010F-2 by Littelfuse is a PTC resettable fuse with 1.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type. The device has a compact SMT package style, making it suitable for space-constrained designs.
NANOSMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .09 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Package Style (Meter): SMT;
TE Connectivity's NANOSMDC075F-2 is a PTC resettable fuse with 6V URac, 0.8W power dissipation, and 85°C max operating temp. It features dual-ended terminals in a rectangular package for temperature sensing applications. Suitable for surface mounting method.
NANOSMDC110F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .07 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Operating Voltage: 6 V;
TE Connectivity's NANOSMDC110F-2 is a PTC resettable fuse with a rated power dissipation of 0.8W. It features dual-ended terminals, rectangular packaging, and operates b/w -40°C to 85°C. Ideal for temperature sensing applications in surface mount installations.
NANOSMDC016F
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Shape (Package): RECTANGULAR PACKAGE; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Thermistor Application: OVERLOAD PROTECTION;
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Terminal Shape: ONE SURFACE; No. of Terminals: 2; Terminal Finish: TIN;
NANOSMDC050F/13.2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Terminal Finish: TIN; Additional Features: RESISTANCE VARIES FROM 0.20 TO 0.800 OHMS; No. of Terminals: 2;
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; JESD-609 Code: e3; Width (Package): 1.8 mm; Shape (Package): RECTANGULAR PACKAGE;
NANOSMDC035F-2
NANOSMDC035F-2 by TE Connectivity is a non-linear resistor used for temperature sensing. It has dual-ended terminal placement and a rectangular package shape. With a rated AC voltage of 16V and max operating temperature of 85°C, it is suitable for surface mount applications requiring PTC resettable fuse resistors.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved