Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's NANOSMDC110F-2 is a PTC resettable fuse with a rated power dissipation of 0.8W. It features dual-ended terminals, rectangular packaging, and operates b/w -40°C to 85°C. Ideal for temperature sensing applications in surface mount installations.
Median Price
$0.269
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.500
100+ parts
$0.342
1k+ parts
$0.254
10k+ parts
$0.185
Newark
$0.576
$0.360
$0.288
-
DigiKey
$0.600
$0.348
$0.266
Arrow
$0.171
Verical
$0.172
TTI
$0.186
Element14
$0.496
$0.318
$0.305
Chip1Stop
$0.177
Farnell
$0.213
$0.184
$0.169
Nova Conductors
$0.201
Maritex
$0.428
$0.256
$0.208
$0.168
Component Electronics Inc.
$0.460
$0.350
$0.300
Cyclops Electronics Ltd
IBS Electronics
$0.241
NAC Semi
$0.210
Semi Source
Lakeland Logistics Inc
Sunrise Surplus Inc.
Ashlea Components Ltd
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Inventory MP
Component Sense
PC Components Company LLC
Bristol Electronics
Euro-Tech
American Connector Supply Corp
SPM Sales
Elcom Components
ComSIT Distribution GmbH
Prism Electronics
Semtec, LLC
Advanced Electronics
$0.042
$0.038
$0.034
Corohmni
$0.090
Semicontronic
$0.126
$0.123
$0.122
Argo Parts USA
$0.191
Netroflash
Component Stockers USA
$0.270
$0.250
$0.190
$0.130
Aztec Data Supply Inc.
$0.330
Continental Prestige Electronics
$0.335
$0.212
$0.195
$0.178
Perfect Parts
Kepictronics
Assy Fe
Cyclops Electronics Ltd (Excess)
Futuretech Components
This thermistor is specifically designed for temperature sensing applications, providing accurate and reliable temperature measurements.
The dual ended terminal placement allows for easy installation and connection, making it convenient to use in various electronic circuits.
The rectangular package shape provides a compact and space-saving design, ideal for applications where limited space is a concern.
The embossed 7 inch packing method ensures the safe storage and transportation of the thermistors, minimizing the risk of damage during handling.
With two terminals, this thermistor is easy to install and connect in circuit applications, offering a simple and straightforward setup process.
The wraparound terminal shape provides a secure and stable connection, ensuring reliable performance and signal transmission in the circuit.
With a high maximum operating temperature of 85°C, this thermistor can withstand elevated temperature environments, expanding its range of applications.
The low minimum operating temperature of -40°C allows this thermistor to function effectively even in cold environments, increasing its versatility.
This thermistor functions as a PTC resettable fuse, providing overcurrent protection and enhancing the safety and reliability of the electronic circuit.
The surface mounting type enables easy and secure attachment of the thermistor to a circuit board, simplifying the installation process.
With a high rated power dissipation of 0.8 Watts, this thermistor can handle power loads effectively, ensuring stable and consistent performance in demanding applications.
Non-linear Resistors NANOSMDC110F-2 attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Additional Features:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Packing Method:
Rated Power Dissipation (P):
Resistor Type:
Sub-Category:
Terminal Placement:
Terminal Shape:
Thermistor Application:
NANOSMDC110F-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Central Semiconductor
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Hitachi
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Multicomp Pro
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
B72205-S271-K101
TDK
The TDK B72205-S271-K101 is a VARISTOR with 8.6J energy capacity, 275V RMS voltage, and 350V operating voltage. It has RADIAL terminals and DISK PACKAGE shape for THROUGH HOLE MOUNT applications in protecting circuits from overvoltage spikes.
MF-R090
Bourns
The Bourns MF-R090 is a PTC resettable fuse with resistance of 0.14 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It features radial terminal placement and wire-shaped terminals in a disk package style. Ideal for overcurrent protection in various electronic applications.
RF1350-000
TE Connectivity's RF1350-000 is a PTC resettable fuse with dual-ended terminals for temperature sensing applications. With an operating voltage of 30V, it has a max temperature of 85°C and min of -40°C. This surface mount thermistor has SMT package style, TR packing method, and wraparound terminal shape.
B72214-S321-K101
The TDK B72214-S321-K101 varistor has a max energy absorption of 84J, operating voltage of 420V, and rated power dissipation of 0.6W. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
RUEF250-AP
RUEF250-AP by TE Connectivity is a PTC resettable fuse with resistance of 0.07 ohm, rated power dissipation of 1.2W, and URac of 30V. It is used for temperature sensing applications with radial terminal placement in a rectangular package. Operating temperatures range from -40 to 85°C making it suitable for various electronic devices.
NTCS0603E3103GMT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3103GMT is a NTC thermistor with 10000 ohm resistance, 2% tolerance, and 150°C max operating temp. Ideal for temperature sensing applications due to its thermal sensitivity index of 3610 K and surface mount package style.
NANOSMDC020F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.4 mm;
MF-FSMF050X-2
Bourns MF-FSMF050X-2 is a PTC resettable fuse with resistance of 0.1 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold finish.
MF-SM075/60-2-99
Bourns MF-SM075/60-2-99 is a PTC resettable fuse with 60V URac, 1.7W power dissipation, and -40 to 85°C operating range. It's used for overload protection in various applications due to its dual-ended terminals and surface mounting type.
MF-MSMF150/24X-2
Bourns MF-MSMF150/24X-2 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 24V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
RUEF250U-2
The Littelfuse RUEF250U-2 is a PTC resettable fuse with resistance of 0.02 ohm, suitable for overcurrent protection applications. It has a max operating temperature of 85°C and operates at 30V DC/RMS voltage. With radial terminal placement and rectangular package shape, it is designed for through-hole mounting in various electronic circuits.
B72214P2271K101
The TDK B72214P2271K101 is a varistor with 130J energy capacity, 275V RMS voltage, and 350V operating voltage. It is used for surge protection in applications requiring high reliability and durability. The varistor has dual-ended terminals, metal oxide technology, and radial package style suitable for through-hole mounting.
MPTS2920L150R
Meritek Electronics
MPTS2920L150R by Meritek Electronics is a PTC thermistor resistor with a rated power dissipation of 1.5W and an operating voltage of 33V. It is designed for surface mount applications and has a rectangular package shape with dual-ended terminal placement.
MF-MSMF030-2
The Bourns MF-MSMF030-2 is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 30V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
60R185XF
60R185XF by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. Featuring radial terminal placement, disk package shape, and matte tin finish, it operates b/w -40 to 85°C.
RXEF010
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 4.5 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 3 mm; No. of Terminals: 2;
V275LA20A
V275LA20A by Littelfuse is a VARISTOR with a rated AC voltage of 275V and max energy absorption of 75J. It operates b/w -55°C to 125°C, suitable for surge protection in various applications like power supplies and industrial equipment. With a radial package style and through-hole mounting, it offers reliable protection against voltage spikes.
S20K275
Herrmann Kg
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial; Maximum Circuit RMS Voltage: 275 V; Terminal Finish: Tin/Lead (Sn/Pb); Operating Voltage: 350 V;
USP12837
Littelfuse USP12837 is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3892 K. Ideal for temperature sensing applications, it has radial terminal placement and operates b/w -55°C to 125°C. Package style is chassis mount with flexible wire terminals.
MF-NSMF050-2
The Bourns MF-NSMF050-2 is a PTC resettable fuse with resistance of 0.15 ohm, operating voltage of 13.2V, and max temp of 85°C. It features dual-ended terminals in a rectangular SMT package suitable for automotive applications meeting AEC-Q200 standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NANOSMDC016F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 85 Cel; Manufacturer Series: NANOSMD;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; JESD-609 Code: e3;
NANOSMDC012F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Terminal Placement: DUAL ENDED; Thermistor Application: OVERLOAD PROTECTION; Terminal Shape: ONE SURFACE; Additional Features: RESISTANCE MIN IS 1.4 OHMS AT 25 DEG CEL;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.4 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 3.4 mm;
TE Connectivity's NANOSMDC020F-2 is a PTC resettable fuse with a rated power dissipation of 0.6W and max operating temperature of 85°C. It features dual-ended terminal placement in a rectangular package, suitable for temperature sensing applications at up to 24V AC voltage.
NANOSMDC050F/13.2-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Thermistor Application: OVERCURRENT PROTECTION;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Additional Features: RESISTANCE VARIES FROM 0.2 TO 0.75 OHMS;
NANOSMDC150F-2
NANOSMDC150F-2 by TE Connectivity is a PTC thermistor used for overload protection. It has dual-ended terminal placement and a rectangular package shape. The surface mount resistor has matte tin finish with nickel barrier.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Package Style (Meter): SMT;
NANOSMDC010F-2
NANOSMDC010F-2 by Littelfuse is a PTC resettable fuse with 1.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type. The device has a compact SMT package style, making it suitable for space-constrained designs.
NANOSMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .09 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Package Style (Meter): SMT;
TE Connectivity's NANOSMDC075F-2 is a PTC resettable fuse with 6V URac, 0.8W power dissipation, and 85°C max operating temp. It features dual-ended terminals in a rectangular package for temperature sensing applications. Suitable for surface mounting method.
NANOSMDC110F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .07 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Operating Voltage: 6 V;
NANOSMDC016F
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Shape (Package): RECTANGULAR PACKAGE; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Thermistor Application: OVERLOAD PROTECTION;
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Terminal Shape: ONE SURFACE; No. of Terminals: 2; Terminal Finish: TIN;
NANOSMDC050F/13.2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Terminal Finish: TIN; Additional Features: RESISTANCE VARIES FROM 0.20 TO 0.800 OHMS; No. of Terminals: 2;
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; JESD-609 Code: e3; Width (Package): 1.8 mm; Shape (Package): RECTANGULAR PACKAGE;
NANOSMDC035F-2
NANOSMDC035F-2 by TE Connectivity is a non-linear resistor used for temperature sensing. It has dual-ended terminal placement and a rectangular package shape. With a rated AC voltage of 16V and max operating temperature of 85°C, it is suitable for surface mount applications requiring PTC resettable fuse resistors.
NANOSMDC110F
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Terminal Finish: MATTE TIN OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved