Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NANOSMDC010F-2 by Littelfuse is a PTC resettable fuse with 1.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type. The device has a compact SMT package style, making it suitable for space-constrained designs.
Median Price
$0.274
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$0.265
100+ parts
$0.162
1k+ parts
-
10k+ parts
Mouser Electronics
$0.440
$0.307
$0.234
$0.165
DigiKey
$0.530
$0.311
$0.238
TTI Europe
$0.173
Farnell
$0.141
Element14
$0.284
Verical
$0.330
Chip1Stop
$0.184
$0.179
Nova Conductors
$0.182
Maritex
$0.550
$0.136
$0.097
$0.077
Chip Stock
IBS Electronics
$0.266
Cyclops Electronics Ltd
Vyrian
NAC Semi
Diverse Electronics
Bristol Electronics
Atlantic Semiconductor
Advanced Electronics
$0.021
$0.019
$0.017
Corohmni
$0.120
Semicontronic
$0.147
$0.143
Continental Prestige Electronics
$0.174
$0.171
Argo Parts USA
$0.169
Netroflash
Aztec Data Supply Inc.
$0.420
CoreStaff
$0.557
$0.218
GreenTree Electronics
Authorized Procurement Solutions
iodParts Technologies Inc.
Glotronic Ltd.
Kepictronics
This thermistor is specifically designed for overcurrent protection, making it a reliable choice for preventing damage due to excessive current in electronic circuits.
The dual-ended terminal placement allows for easy installation and connection in a circuit, ensuring efficient operation.
The embossed packing method in a 7-inch reel ensures easy handling and storage, making it convenient for mass production and assembly.
The low resistance value of 1.6 ohms helps in effectively limiting the current flow in the circuit, providing reliable protection against overcurrent situations.
With a high maximum operating temperature of 85°C, this thermistor can withstand elevated temperatures, increasing its durability and reliability in various applications.
The low minimum operating temperature of -40°C ensures that the thermistor can function effectively in cold environments, making it suitable for a wide range of operating conditions.
The surface mount technology (SMT) package style allows for easy and secure mounting on PCBs, saving space and enhancing the overall reliability of the circuit.
The operating voltage of 60 volts provides sufficient protection against high voltage surges, making it suitable for use in applications where voltage fluctuations are common.
Non-linear Resistors NANOSMDC010F-2 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
NANOSMDC010F-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
1N4148WS
Changzhou Starsea Electronics
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Hitano Enterprise
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
B57153S0100M000
TDK
B57153S0100M000 by TDK is a NTC thermistor with 10 ohm resistance, rated for 265V AC voltage. It is used for overload protection in applications requiring radial terminal placement and disk package shape. With a max operating temperature of 170°C, it offers high thermal sensitivity index of 2800K.
MINISMDC075F/24
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; No. of Terminals: 2;
NTCS0805E3103FHT
Vishay Intertechnology's NTCS0805E3103FHT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3940 K. It is used for temperature sensing applications in a surface mount package with dual-ended terminals. Operating temperature ranges from -40 to 150 °C.
60R020XU
60R020XU by Littelfuse is a PTC resettable fuse with resistance of 1.83 ohm and operating voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With reference standards including CUL, TUV, and UL, it operates b/w -40 to 85 °C.
MF-SMDF050-2
Bourns
The Bourns MF-SMDF050-2 is a PTC resettable fuse with resistance of 0.2 ohm and operating voltage of 60V. It features dual-ended terminals, SMT package style, and gold over nickel terminal finish. Ideal for applications requiring protection against overcurrent events in electronic circuits.
B57364-S109-M
B57364-S109-M by TDK is a NTC thermistor with 1 ohm resistance, rated for 265V AC voltage. It has a thermal sensitivity index of 2800K and can operate b/w -55°C to 170°C. Ideal for soft start applications due to its radial terminal placement in disk package.
RF2487-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: CSA; TUV; UL; Length (Package): 4.83 mm;
2920L075DR
2920L075DR by Littelfuse is a PTC resettable fuse with resistance of 0.35 ohm and operating voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
TFPT0603L1001FV
Vishay Intertechnology TFPT0603L1001FV is a PTC thermistor with 1000 ohm resistance, 1% tolerance, and 0.075 W power dissipation. It is used for temperature compensation in applications requiring dual-ended terminals and surface mounting type.
B72210S0271K101V87
B72210S0271K101V87 by TDK is a VARISTOR with 43J energy capacity, 275V RMS voltage, and 350V operating voltage. It has RADIAL terminals and DISK PACKAGE shape. Ideal for surge protection in electronics due to its high energy absorption and voltage ratings.
RF1335-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .6 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 30 V; Thermistor Application: OVERCURRENT PROTECTION;
NTC0805J5K0
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
B59830C0120A070
The TDK B59830C0120A070 is a PTC thermistor with 3.7 ohm resistance and rated for 265V operating voltage. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With a max operating temperature of 125°C, it offers UL-certified reliability for safeguarding circuits at up to 230V AC voltage.
ASMD100F-2
TE Connectivity
TE Connectivity's ASMD100F-2 is a PTC resettable fuse with 0.098 ohm resistance, 30V operating voltage, and -40 to 85°C temperature range. It features dual-ended terminals for overcurrent protection in surface mount applications. AEC-Q200 and TS 16949 compliant, it offers reliable circuit protection in compact SMT packages.
SMD075F/60-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .35 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 13 INCH; Length (Package): 7.98 mm;
V42MLA1206NHAUTO
V42MLA1206NHAUTO by Littelfuse is a metal oxide varistor with a max energy absorbing capacity of 0.8 J. It is designed for surface mount applications and has a max operating temperature of 125°C. This varistor is commonly used in automotive electronics to protect against voltage surges.
RXEF250K
TE Connectivity's RXEF250K is a PTC thermistor with resistance of 0.05 ohm, rated power dissipation of 2.5W, and URac of 72V. It is used for temperature sensing applications due to its radial terminal placement and disk package shape. Operating temperatures range from -40°C to 85°C making it suitable for various environments.
B59980-C80-A70
TDK B59980-C80-A70 is a PTC thermistor with 25 ohm resistance, rated for 63V AC voltage. It is used for overload protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -40°C to 125°C with a tolerance of 25%.
ERZE14A681
Panasonic
Panasonic ERZE14A681 is a VARISTOR with 382J energy capacity, 420V RMS voltage, and 560V operating voltage. Ideal for surge protection in applications requiring high energy absorption like power supplies and industrial equipment due to its radial terminal placement and bulk packing method.
NTCS0805E3103FMT
Vishay Intertechnology's NTCS0805E3103FMT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3570 K thermal sensitivity index. Ideal for temperature sensing applications, it operates b/w -40 to 150 °C and comes in a SMT package with dual-ended terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NANOSMDC016F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 85 Cel; Manufacturer Series: NANOSMD;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; JESD-609 Code: e3;
NANOSMDC012F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Terminal Placement: DUAL ENDED; Thermistor Application: OVERLOAD PROTECTION; Terminal Shape: ONE SURFACE; Additional Features: RESISTANCE MIN IS 1.4 OHMS AT 25 DEG CEL;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.4 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 3.4 mm;
NANOSMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.4 mm;
TE Connectivity's NANOSMDC020F-2 is a PTC resettable fuse with a rated power dissipation of 0.6W and max operating temperature of 85°C. It features dual-ended terminal placement in a rectangular package, suitable for temperature sensing applications at up to 24V AC voltage.
NANOSMDC050F/13.2-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Thermistor Application: OVERCURRENT PROTECTION;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Additional Features: RESISTANCE VARIES FROM 0.2 TO 0.75 OHMS;
NANOSMDC150F-2
NANOSMDC150F-2 by TE Connectivity is a PTC thermistor used for overload protection. It has dual-ended terminal placement and a rectangular package shape. The surface mount resistor has matte tin finish with nickel barrier.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Package Style (Meter): SMT;
NANOSMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .09 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Package Style (Meter): SMT;
TE Connectivity's NANOSMDC075F-2 is a PTC resettable fuse with 6V URac, 0.8W power dissipation, and 85°C max operating temp. It features dual-ended terminals in a rectangular package for temperature sensing applications. Suitable for surface mounting method.
NANOSMDC110F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .07 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Operating Voltage: 6 V;
TE Connectivity's NANOSMDC110F-2 is a PTC resettable fuse with a rated power dissipation of 0.8W. It features dual-ended terminals, rectangular packaging, and operates b/w -40°C to 85°C. Ideal for temperature sensing applications in surface mount installations.
NANOSMDC016F
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Shape (Package): RECTANGULAR PACKAGE; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Thermistor Application: OVERLOAD PROTECTION;
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Terminal Shape: ONE SURFACE; No. of Terminals: 2; Terminal Finish: TIN;
NANOSMDC050F/13.2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Terminal Finish: TIN; Additional Features: RESISTANCE VARIES FROM 0.20 TO 0.800 OHMS; No. of Terminals: 2;
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; JESD-609 Code: e3; Width (Package): 1.8 mm; Shape (Package): RECTANGULAR PACKAGE;
NANOSMDC035F-2
NANOSMDC035F-2 by TE Connectivity is a non-linear resistor used for temperature sensing. It has dual-ended terminal placement and a rectangular package shape. With a rated AC voltage of 16V and max operating temperature of 85°C, it is suitable for surface mount applications requiring PTC resettable fuse resistors.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved