Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Shape (Package): RECTANGULAR PACKAGE; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Thermistor Application: OVERLOAD PROTECTION;
Median Price
$0.211
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
1k+ parts
$0.188
10k+ parts
$0.166
Nova Conductors
$0.291
Vyrian
Bristol Electronics
A2Z Electronics, Inc.
ComSIT Distribution GmbH
Corohmni
$0.106
Aztec Data Supply Inc.
$0.160
Semicontronic
$0.179
$0.175
$0.174
Argo Parts USA
$0.282
Continental Prestige Electronics
$0.285
Netroflash
$0.276
$0.271
Non-linear Resistors NANOSMDC016F attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
JESD-609 Code:
Mounting Type:
No. of Terminals:
Shape (Package):
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
NANOSMDC016F Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Bytesonic Electronics
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
NTCS0402E3103FLT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .07 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
0ZCM0005FF2G
Bel Fuse
Bel Fuse's 0ZCM0005FF2G is a PTC resettable fuse with resistance of 3.8 ohm, operating voltage of 15V, and max circuit DC voltage of 15V. It is used in non-linear resistor applications with dual-ended terminal placement and surface mounting type.
CG0603MLC-05LE
Bourns
Bourns CG0603MLC-05LE is a varistor with 25V max RMS voltage and 5V operating voltage. It has dual-ended terminals, rectangular package, and operates b/w -40°C to 85°C. Ideal for surface mount applications in automotive electronics meeting AEC-Q200 standards.
1812L150/24MR
Littelfuse
1812L150/24MR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm. It features dual-ended terminals in a rectangular SMT package. Primarily used for overcurrent protection, it has a temperature range from -40 to 85 °C and meets CUL, TUV, and UL standards.
RF1256-000
VARISTOR; Terminal Finish: MATTE TIN OVER NICKEL; Manufacturer Series: PESD; JESD-609 Code: e3;
LVR075S-240
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .316 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 4.8 mm; Maximum Circuit DC Voltage: 240 V;
MF-R010-0-17
The Bourns MF-R010-0-17 is a PTC resettable fuse with 2.5 ohm resistance and 60V operating voltage, suitable for overcurrent protection applications. It features radial terminal placement, disk package shape, and operates b/w -40°C to 85°C. This non-linear resistor has CUL, TUV, and UL certifications for quality assurance.
ERZE14A391
Panasonic
The Panasonic ERZE14A391 is a VARISTOR with 275J energy capacity, 320V operating voltage, and 1W power dissipation. Ideal for surge protection in circuits with max 250V RMS or 320V DC voltages. RADIAL terminal placement and DISK PACKAGE shape make it suitable for THROUGH HOLE MOUNT applications.
B72650M0301K072
TDK
B72650M0301K072 by TDK is a VARISTOR with METAL OXIDE FILM tech. It has 9.6J energy capacity, 300V RMS voltage, and -40 to 85°C operating temp range. Ideal for surge protection in electronics due to its DUAL terminals and DO-214var package style for SURFACE MOUNT applications.
16R400GPR
16R400GPR by Littelfuse is a PTC resettable fuse with a resistance of 0.021 ohm and an operating voltage of 16V. It is used for overcurrent protection in applications such as through hole mounting.
NCP15XH103F03RC
Murata Manufacturing
Murata Manufacturing's NCP15XH103F03RC is a Non-linear Resistor with 10000 ohm resistance, -40 to 125 °C operating temperature range, and 1% tolerance. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in RECTANGULAR PACKAGE.
B72225S4421K101
The TDK B72225S4421K101 is a VARISTOR with 700J energy capacity, 420V RMS voltage, and 560V operating voltage. Ideal for surge protection in applications requiring high energy absorption like power supplies and industrial equipment. With radial terminal placement and metal oxide film technology, it operates b/w -40°C to 85°C.
MF-MSMF020-2
The Bourns MF-MSMF020-2 is a PTC resettable fuse with a resistance of 0.4 ohm and an operating voltage of 30V. It is commonly used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mount mounting type.
V430CH8
Intersil
Non-linear Resistors; Mounting Type: SURFACE MOUNT; Operating Voltage: 369 V; Maximum Circuit DC Voltage: 369 V; Package Style (Meter): Chip / Die; Maximum Circuit RMS Voltage: 275 V;
RF1180-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Height (Package): 1.94 mm;
V42MLA1206NHAUTO
V42MLA1206NHAUTO by Littelfuse is a metal oxide varistor with a max energy absorbing capacity of 0.8 J. It is designed for surface mount applications and has a max operating temperature of 125°C. This varistor is commonly used in automotive electronics to protect against voltage surges.
RUEF135-2
TE Connectivity
TE Connectivity's RUEF135-2 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 0.8W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and rectangular package shape, it offers reliable protection at rated AC voltage of 30V.
0ZCJ0016FF2E
Bel Fuse's 0ZCJ0016FF2E is a PTC resettable fuse with a resistance of 1.1 ohm and operating voltage of 48V. It is used in non-linear resistor applications, featuring dual-ended terminal placement and surface mount mounting type.
MICROSMD005F-2
TE Connectivity's MICROSMD005F-2 is a PTC resettable fuse with dual-ended terminals, suitable for temperature sensing applications. With a max operating temperature of 85°C and operating voltage of 30V, this surface mount device comes in a compact rectangular package measuring 3.2mm x 2.5mm x 0.85mm. It meets reference standards such as CSA, TUV, and UL for reliable performance in various electronic circuits.
RXEF075-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Shape (Package): DISK PACKAGE; Terminal Placement: RADIAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NANOSMDC016F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 85 Cel; Manufacturer Series: NANOSMD;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; JESD-609 Code: e3;
NANOSMDC012F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Terminal Placement: DUAL ENDED; Thermistor Application: OVERLOAD PROTECTION; Terminal Shape: ONE SURFACE; Additional Features: RESISTANCE MIN IS 1.4 OHMS AT 25 DEG CEL;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.4 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 3.4 mm;
NANOSMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.4 mm;
TE Connectivity's NANOSMDC020F-2 is a PTC resettable fuse with a rated power dissipation of 0.6W and max operating temperature of 85°C. It features dual-ended terminal placement in a rectangular package, suitable for temperature sensing applications at up to 24V AC voltage.
NANOSMDC050F/13.2-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Thermistor Application: OVERCURRENT PROTECTION;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Additional Features: RESISTANCE VARIES FROM 0.2 TO 0.75 OHMS;
NANOSMDC150F-2
NANOSMDC150F-2 by TE Connectivity is a PTC thermistor used for overload protection. It has dual-ended terminal placement and a rectangular package shape. The surface mount resistor has matte tin finish with nickel barrier.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Package Style (Meter): SMT;
NANOSMDC010F-2
NANOSMDC010F-2 by Littelfuse is a PTC resettable fuse with 1.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type. The device has a compact SMT package style, making it suitable for space-constrained designs.
NANOSMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .09 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Package Style (Meter): SMT;
TE Connectivity's NANOSMDC075F-2 is a PTC resettable fuse with 6V URac, 0.8W power dissipation, and 85°C max operating temp. It features dual-ended terminals in a rectangular package for temperature sensing applications. Suitable for surface mounting method.
NANOSMDC110F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .07 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Operating Voltage: 6 V;
TE Connectivity's NANOSMDC110F-2 is a PTC resettable fuse with a rated power dissipation of 0.8W. It features dual-ended terminals, rectangular packaging, and operates b/w -40°C to 85°C. Ideal for temperature sensing applications in surface mount installations.
NANOSMDC016F
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Terminal Shape: ONE SURFACE; No. of Terminals: 2; Terminal Finish: TIN;
NANOSMDC050F/13.2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Terminal Finish: TIN; Additional Features: RESISTANCE VARIES FROM 0.20 TO 0.800 OHMS; No. of Terminals: 2;
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; JESD-609 Code: e3; Width (Package): 1.8 mm; Shape (Package): RECTANGULAR PACKAGE;
NANOSMDC035F-2
NANOSMDC035F-2 by TE Connectivity is a non-linear resistor used for temperature sensing. It has dual-ended terminal placement and a rectangular package shape. With a rated AC voltage of 16V and max operating temperature of 85°C, it is suitable for surface mount applications requiring PTC resettable fuse resistors.
NANOSMDC012F
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.4 ohm; Additional Features: RESISTANCE MIN IS 1.4 OHMS AT 25 DEG CEL; Terminal Finish: TIN; Manufacturer Series: NANOSMDC012F;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved