Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's NANOSMDC012F is a PTC thermistor with 1.4 ohm resistance, dual-ended terminals, and tin finish. Primarily used for overload protection in surface mount applications due to its rectangular package shape.
Median Price
$0.210
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
1k+ parts
$0.199
10k+ parts
$0.180
Nova Conductors
Authorized Procurement Solutions
Bastille Electronics
This thermistor is specifically designed for overload protection, making it a reliable choice for applications where protecting against excessive current is crucial.
Dual ended terminal placement allows for more versatile installation options and can improve the overall performance and stability of the thermistor.
The rectangular package shape makes this thermistor easy to mount and integrate into electronic circuits, offering convenience and ease of use.
With a resistance value of 1.4 ohm, this thermistor is suitable for applications requiring specific resistance levels, providing accurate and consistent performance.
Having two terminals simplifies the connection process and ensures a secure electrical connection, enhancing the overall reliability of the thermistor.
The one surface terminal shape offers easy soldering and connection, making installation straightforward and efficient.
The tin terminal finish provides good conductivity and corrosion resistance, ensuring long-lasting performance and reliability of the thermistor.
Being a PTC thermistor means that the resistance increases with temperature, making it ideal for applications where the resistance needs to change based on temperature conditions.
Surface mounting type simplifies the installation process and allows for efficient use of space on circuit boards, making it a practical choice for compact electronic designs.
Non-linear Resistors NANOSMDC012F attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Additional Features:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Shape (Package):
Resistance:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
NANOSMDC012F Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Hitachi
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Rochester Electronics
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
Laube Technology
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
STM32H753IIK6
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
B72220S2421K101
TDK
B72220S2421K101 by TDK is a VARISTOR with 420V RMS and 560V DC max circuit voltage. It has a METAL OXIDE FILM tech, 273J energy capacity, and operates b/w -40 to 105°C. Ideal for surge protection in various electronic applications due to its high energy absorption and temperature range.
B72220S0151K101
B72220S0151K101 by TDK is a VARISTOR with 150V RMS and 200V operating voltage. With a max energy absorption of 85J, it's ideal for surge protection in applications requiring high reliability. Featuring radial terminal placement and metal oxide technology, it operates b/w -40°C to 105°C.
0603L100SLYR
Littelfuse
0603L100SLYR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 6V, and rated power dissipation of 0.6W. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
B59950C0120A070
The TDK B59950C0120A070 is a PTC thermistor with 3.7 ohm resistance and rated for 80V operating voltage. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With a temperature range of -40 to 125 °C, it offers reliable protection in various electronic circuits.
NTCS0402E3473FXT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .07 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
590-33BQ01-103
Honeywell Sensing And Control
590-33BQ01-103 by Honeywell is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3974 K. It is used for temperature sensing applications with a max operating temperature of 125°C and min of -60°C. The thermistor has radial terminal placement in a special package with flexible wire terminals for chassis mounting.
1624366-2
TE Connectivity
TE Connectivity's 1624366-2 is a NTC thermistor with 680 ohm resistance and 5% tolerance. It features dual-ended terminals in a rectangular package, measuring 2mm x 1.25mm x 0.5mm. Ideal for temperature sensing applications, it has a rated power dissipation of 0.125W and surface mounting type.
MF-MSHT110KX-2
Bourns
Bourns MF-MSHT110KX-2 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 16V, and max temperature of 125°C. It is used for overcurrent protection in various applications such as automotive electronics and power supplies.
0ZCJ0035AF2E
Bel Fuse
Bel Fuse's 0ZCJ0035AF2E is a PTC resettable fuse with resistance of 0.3 ohm, operating voltage of 30V, and dual-ended terminal placement. Ideal for automotive applications due to AEC-Q200 compliance and compact SMT package measuring 3.5mm x 1.8mm x 1.3mm.
SMD185F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .065 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Length (Package): 9.4 mm;
GA5K3A1A
TE Connectivity's GA5K3A1A is a non-linear resistor with 2 terminals, operating from -40 to 125 °C. With a length of 76mm, it is ideal for temperature sensing applications.
RXEF300K
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; No. of Terminals: 2; Terminal Placement: RADIAL;
CG0603MLC-05LE
Bourns CG0603MLC-05LE is a varistor with 25V max RMS voltage and 5V operating voltage. It has dual-ended terminals, rectangular package, and operates b/w -40°C to 85°C. Ideal for surface mount applications in automotive electronics meeting AEC-Q200 standards.
RXEF050-1
TE Connectivity's RXEF050-1 is a PTC resettable fuse with 72V URac. It has a rated power dissipation of 0.77W and max operating temp of 85°C. Ideal for temperature sensing applications, it features radial terminal placement in a disk package for through-hole mounting.
NCP18XH103J03RB
Murata Manufacturing
Murata Manufacturing's NCP18XH103J03RB is a Non-linear Resistor with 10000 ohm resistance, 5% tolerance, and -40 to 125 °C operating temperature range. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE.
NTCS0603E3472FHT
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
TMP6131DECT
TMP6131DECT by Texas Instruments is a PTC thermistor with 10000 ohm resistance, 1% tolerance, and dual-ended terminals. Ideal for temperature sensing applications, it operates b/w -40 to 125 °C and comes in X1SON package style for surface mounting method.
60R185XMR
60R185XMR by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm and operating voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. The thermistor has a max operating temperature of 85°C and min of -40°C, meeting CUL, TUV, and UL standards.
2016L075/60MR
2016L075/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.13 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it ensures reliable performance in a compact form factor.
MF-SM150/33-2
The Bourns MF-SM150/33-2 is a PTC resettable fuse with resistance of 0.06 ohm and operating voltage of 33V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style for surface mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NANOSMDC012F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Terminal Placement: DUAL ENDED; Thermistor Application: OVERLOAD PROTECTION; Terminal Shape: ONE SURFACE; Additional Features: RESISTANCE MIN IS 1.4 OHMS AT 25 DEG CEL;
NANOSMDC016F-2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 85 Cel; Manufacturer Series: NANOSMD;
NANOSMDC020F-2
TE Connectivity's NANOSMDC020F-2 is a PTC resettable fuse with a rated power dissipation of 0.6W and max operating temperature of 85°C. It features dual-ended terminal placement in a rectangular package, suitable for temperature sensing applications at up to 24V AC voltage.
NANOSMDC050F/13.2-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Additional Features: RESISTANCE VARIES FROM 0.2 TO 0.75 OHMS;
NANOSMDC150F-2
NANOSMDC150F-2 by TE Connectivity is a PTC thermistor used for overload protection. It has dual-ended terminal placement and a rectangular package shape. The surface mount resistor has matte tin finish with nickel barrier.
NANOSMDC075F-2
TE Connectivity's NANOSMDC075F-2 is a PTC resettable fuse with 6V URac, 0.8W power dissipation, and 85°C max operating temp. It features dual-ended terminals in a rectangular package for temperature sensing applications. Suitable for surface mounting method.
NANOSMDC010F-2
NANOSMDC010F-2 by Littelfuse is a PTC resettable fuse with 1.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type. The device has a compact SMT package style, making it suitable for space-constrained designs.
NANOSMDC110F-2
TE Connectivity's NANOSMDC110F-2 is a PTC resettable fuse with a rated power dissipation of 0.8W. It features dual-ended terminals, rectangular packaging, and operates b/w -40°C to 85°C. Ideal for temperature sensing applications in surface mount installations.
NANOSMDC035F-2
NANOSMDC035F-2 by TE Connectivity is a non-linear resistor used for temperature sensing. It has dual-ended terminal placement and a rectangular package shape. With a rated AC voltage of 16V and max operating temperature of 85°C, it is suitable for surface mount applications requiring PTC resettable fuse resistors.
NANOSMDC016F
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Terminal Shape: ONE SURFACE; No. of Terminals: 2; Terminal Finish: TIN;
NANOSMD350LR-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: MINIMUM RESISTANCE IS 0.004 OHMS; Terminal Shape: WRAPAROUND; Terminal Placement: DUAL ENDED;
NANOSMDC050F/13.2
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Terminal Finish: TIN; Additional Features: RESISTANCE VARIES FROM 0.20 TO 0.800 OHMS; No. of Terminals: 2;
NANOASMDC010F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.6 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 25 DEG CEL; Minimum Operating Temperature: -40 Cel;
NANOASMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 1.8 mm; No. of Terminals: 2;
NANOASMDC016F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 85 Cel; Manufacturer Series: NANOASMDC016F-2;
NANOSMDC035F
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: .45 ohm; JESD-609 Code: e3; Manufacturer Series: NANOSMDC035F; Terminal Shape: ONE SURFACE;
NANOASMDC012F-2
PTC RESETTABLE FUSE; Manufacturer Series: NANOASMDC012F-2;
NANOSMD200LR-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Width (Package): 1.85 mm; Package Style (Meter): SMT; Minimum Operating Temperature: -40 Cel;
NANOSMDC200F-2
PTC RESETTABLE FUSE; Manufacturer Series: NANOSMD;
NANOSMDC012F
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.4 ohm; Additional Features: RESISTANCE MIN IS 1.4 OHMS AT 25 DEG CEL; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Terminal Shape: ONE SURFACE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved