Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's GA10K3A1IA is a non-linear resistor with 2 terminals, operating from -40 to 125°C. With a length of 76mm, it is ideal for temperature sensing applications.
Median Price
$4.650
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$3.626
100+ parts
-
1k+ parts
$3.342
10k+ parts
Heilind Electronics
$3.632
RS (Exports)
$4.160
Mouser Electronics
$3.570
$3.420
DigiKey
$4.770
$3.564
$3.181
Farnell
$5.240
$3.620
$3.150
TE Connectivity
$10.190
Powell Electronics
$17.350
$12.150
$5.570
Master Electronics
$3.510
$3.100
$3.080
Verical
$5.726
TTI Europe
$3.950
Chip1Stop
$5.650
Future Electronics
$3.250
$3.130
Maritex
$4.690
$3.281
$2.607
Nova Conductors
$4.931
Vyrian
Electro Sonic
$5.420
$4.820
$3.230
TME
$2.321
$2.319
Sensible Micro Corp
IBS Electronics
$5.372
$4.726
Prism Electronics
Aztec Data Supply Inc.
$0.320
Semicontronic
$2.230
$2.174
$2.163
Netroflash
$4.684
$4.586
Continental Prestige Electronics
$5.900
$3.870
Neutron USA
$34.990
Argo Parts USA
Ideal for temperature sensing applications, ensuring accurate and reliable temperature measurements.
2 terminal design simplifies installation and connection, allowing for easy integration into circuits.
With a maximum operating temperature of 125°C, suitable for a wide range of high-temperature environments.
Can operate in temperatures as low as -40°C, ensuring functionality in extreme cold conditions.
Long 76mm lead provides flexibility in placement and positioning within electronic systems.
Non-linear resistor design offers precise and customized resistance characteristics for specific applications.
Non-linear Resistors GA10K3A1IA attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Length (Lead):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Resistor Type:
Thermistor Application:
GA10K3A1IA Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
Toshiba
1552200168
Molex
WIRE AND CABLE;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
2920L150DR
Littelfuse
2920L150DR by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm, operating voltage of 33V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and surface mounting type.
B72220S0151K101
TDK
B72220S0151K101 by TDK is a VARISTOR with 150V RMS and 200V operating voltage. With a max energy absorption of 85J, it's ideal for surge protection in applications requiring high reliability. Featuring radial terminal placement and metal oxide technology, it operates b/w -40°C to 105°C.
NTCS0603E3683FHT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 68000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
NANOSMDC016F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; JESD-609 Code: e3;
MOV-10D561K
Bourns
The Bourns MOV-10D561K is a VARISTOR with 70J energy capacity, 350V RMS voltage, and 460V DC operating voltage. It is used for surge protection in circuits with radial terminal placement and metal oxide film technology. Ideal for applications requiring high energy absorption and UL compliance.
0805L150SLYR
0805L150SLYR by Littelfuse is a PTC resettable fuse with resistance of 0.015 ohm and operating voltage of 6V. It is used for overcurrent protection in various applications. The dual-ended thermistor has a rectangular SMT package, matte tin terminal finish, and operates b/w -40 to 85 °C.
RXEF250-2
TE Connectivity's RXEF250-2 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 2.5W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C, featuring radial terminal placement in disk package shape.
RF2622-000
TE Connectivity's RF2622-000 is a PTC resettable fuse with 7.5 ohm resistance and 60V URac. Ideal for temperature sensing applications, it features radial terminal placement in a disk package. With a rated power dissipation of 0.38W, it operates b/w -40 to 85 °C and mounts through hole for reliable performance.
MF-SM250-2
Bourns MF-SM250-2 is a PTC resettable fuse with resistance of 0.024 ohm, operating voltage of 15V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications. SMT package style, AEC-Q200, CUL, TUV, UL reference standards.
B72210S2511K101
The TDK B72210S2511K101 is a VARISTOR with 80J energy capacity, 670V operating voltage, and -40 to 105°C temperature range. Ideal for surge protection in various applications due to its METAL OXIDE FILM technology and radial package style.
RXEF050S
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; Minimum Operating Temperature: -40 Cel; Additional Features: 0.5-0.77 OHMS AT 20 DEG CEL;
V05P25P
V05P25P by Littelfuse is a VARISTOR with 2.5J energy capacity, 25V RMS voltage, and 31V operating voltage. It has METAL OXIDE FILM tech, RADIAL terminal placement, and THROUGH HOLE mounting type. Ideal for surge protection in electronics due to its high energy absorption and voltage ratings.
MF-MSMF110/16-2
The Bourns MF-MSMF110/16-2 is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 16V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style for surface mounting. The device has a temperature range from -40°C to 85°C and meets standards like AEC-Q200, CUL, TUV, and UL.
RUEF900
Raychem
PTC RESETTABLE FUSE; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin (Sn); Dimensions: 29mm x 24.1mm x 3mm; Height (Package): 3 mm;
B72207-S271-K101
TDK's B72207-S271-K101 varistor has a max energy capacity of 21J, operating voltage of 350V, and rated AC voltage of 275V. Ideal for surge protection in applications requiring high energy absorption such as power supplies and industrial equipment.
B72205-S271-K101
The TDK B72205-S271-K101 is a VARISTOR with 8.6J energy capacity, 275V RMS voltage, and 350V operating voltage. It has RADIAL terminals and DISK PACKAGE shape for THROUGH HOLE MOUNT applications in protecting circuits from overvoltage spikes.
1812L075/33DR
1812L075/33DR by Littelfuse is a PTC resettable fuse with resistance of 0.11 ohm, suitable for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with matte tin finish and max operating temperature of 85°C. Ideal for surface mounting, it has a max circuit DC voltage of 33V.
MF-MSMF110-2
The Bourns MF-MSMF110-2 is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style. Ideal for surface mounting with gold over nickel finish, it meets CUL, TUV, and UL standards.
PTCCL09H171HBE
Vishay Intertechnology
Vishay Intertechnology PTCCL09H171HBE is a 22 ohm PTC thermistor with 20% tolerance. It offers overload protection at rated AC voltage of 265 V, with operating temperatures from -25 to 125 °C. Ideal for through hole mounting in applications requiring radial terminal placement and disk package shape.
MF-FSMF050X-2
Bourns MF-FSMF050X-2 is a PTC resettable fuse with resistance of 0.1 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GA10K3A1IB
TE Connectivity's GA10K3A1IB is a 10000 ohm non-linear resistor with thermal sensitivity index of 3976 K. It is used for temperature sensing applications, featuring radial terminal placement and chassis mount package style. Operating temperature ranges from -40 to 125 °C.
GA100K6A1B
NON-LINEAR RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Terminal Shape: FLEXIBLE WIRE; No. of Terminals: 2;
GA10K3A1AM
TE Connectivity's GA10K3A1AM is a non-linear resistor with 10000 ohm resistance, suitable for temperature sensing applications. With a rated temperature of 25°C to 90°C, it features radial terminal placement and chassis mount package style. Its thermal sensitivity index is 3976 K, making it ideal for precise temperature measurements in various electronic devices.
GA10K3MCD1
TE Connectivity's GA10K3MCD1 is a non-linear resistor with 10000 ohm resistance, rated for temperatures from -40 to 125 °C. It features radial terminal placement and tubular package shape, suitable for temperature sensing applications. With a thermal sensitivity index of 3976 K, it offers precise measurements in chassis mount installations.
GA10K3A1A
TE Connectivity's GA10K3A1A is a non-linear resistor with 2 terminals, operating from -40°C to 125°C. With a length of 76mm, it is ideal for temperature sensing applications.
GA10K3A1B
TE Connectivity's GA10K3A1B is a non-linear resistor with 2 terminals, operating from -40 to 125 °C. With a length of 76mm, it is ideal for temperature sensing applications.
GA10K4A1A
NON-LINEAR RESISTOR; Maximum Operating Temperature: 125 Cel; Length (Lead): 76 mm; No. of Terminals: 2; Thermistor Application: TEMPERATURE SENSING; Minimum Operating Temperature: -40 Cel;
GA10K3MBD1
TE Connectivity's GA10K3MBD1 is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a lead length of 56mm, it is ideal for temperature sensing applications.
GA10K4A1AM
TE Connectivity's GA10K4A1AM is a non-linear resistor with a resistance of 10000 ohm. It is used for temperature sensing applications, with a rated temperature range of -40 to 90 °C. The thermistor has radial terminal placement and flexible wire terminal shape, making it suitable for chassis mount installations.
GA100K6A1IB
TE Connectivity's GA100K6A1IB is a non-linear resistor with 2 terminals. It is designed for temperature sensing applications, with a max operating temperature of 125°C and a min operating temperature of -40°C. The resistor has a lead length of 76mm.
GA10KM3499J15
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 250 Cel; Tolerance: 20 %; Terminal Shape: WIRE;
GA10K3435STM010
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
GA10K3CG1012
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Thermistor Application: TEMPERATURE SENSING;
GA10K3A1ID
NON-LINEAR RESISTOR; Maximum Operating Temperature: 125 Cel; Length (Lead): 76 mm; Minimum Operating Temperature: -40 Cel; No. of Terminals: 2; Thermistor Application: TEMPERATURE SENSING;
GA10K3A1C
NON-LINEAR RESISTOR; Maximum Operating Temperature: 125 Cel; Thermistor Application: TEMPERATURE SENSING; No. of Terminals: 2; Length (Lead): 76 mm; Minimum Operating Temperature: -40 Cel;
GA10K3A1D
NON-LINEAR RESISTOR; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Length (Lead): 76 mm; No. of Terminals: 2; Thermistor Application: TEMPERATURE SENSING;
GA10K3A1IC
NON-LINEAR RESISTOR; Maximum Operating Temperature: 125 Cel; Length (Lead): 76 mm; No. of Terminals: 2; Minimum Operating Temperature: -40 Cel; Thermistor Application: TEMPERATURE SENSING;
GA10K3CG582
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .025 W; Maximum Operating Temperature: 125 Cel; Tolerance: 2 %;
GA10K3CG1211
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
GA10K3A542I
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial; Packing Method: BULK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved