Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns MF-USMF020-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 30V, ideal for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with gold over nickel terminal finish. Operating temperature ranges from -40 to 85°C, meeting AEC-Q200, CUL, TUV, and UL standards.
Median Price
$0.322
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.035
100+ parts
$0.032
1k+ parts
$0.029
10k+ parts
-
Distrelec
$0.337
$0.326
$0.293
Mouser Electronics
$0.350
$0.238
$0.168
$0.143
DigiKey
$0.420
$0.244
$0.187
Bürklin Elektronik
$0.440
$0.360
$0.330
$0.290
Arrow
$0.136
Verical
TTI Europe
$0.133
Master Electronics
$0.313
$0.273
Element14
$0.646
$0.601
$0.577
Newark
$0.718
$0.306
$0.294
Avnet
$0.139
TTI
$0.137
Farnell
$0.262
$0.243
RS Americas
Chip1Stop
$0.231
$0.223
Nova Conductors
$0.235
Cyclops Electronics Ltd
Lantek
NAC Semi
$0.224
TME
$0.152
Electro Sonic
Chip Stock
Martec Srl
Vyrian
IBS Electronics
$0.441
$0.385
Speed Components Ltd
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
PC Components Company LLC
LIBRA Elektronik GmbH
Resion
Ashlea Components Ltd
Bristol Electronics
EMSNET
Atlantic Semiconductor
Sensible Micro Corp
EPE Components Inc.
Prism Electronics
Semi Source
Corohmni
$0.014
Advanced Electronics
Semicontronic
$0.065
$0.063
Aztec Data Supply Inc.
$0.083
Argo Parts USA
$0.153
$0.148
Modulus Dynamics
$0.191
$0.189
$0.183
Aranea Global
$0.222
Perfect Parts
GreenTree Electronics
S.R.D Solutions
Abacus Technologies
Kepictronics
Continental Prestige Electronics
$0.301
$0.263
Infinite Electronics LLP (Excess)
Futuretech Components
Allen Electronics Distributors
$0.272
Eastek
Cyclops Electronics Ltd (Excess)
Assy Fe
Computer Components Inc. - USA
Robosynatics
Lucentia Tech
This low resistance value makes this thermistor suitable for overcurrent protection applications.
With a high maximum operating temperature, this thermistor can withstand harsh environmental conditions.
The gold over nickel terminal finish provides good corrosion resistance and ensures reliable connections.
The surface mounting type makes installation easy and allows for a compact design.
With a high operating voltage, this thermistor can protect against overcurrent situations effectively.
The PTC resettable fuse type of resistor ensures the thermistor can recover from a trip state, providing long-term protection.
Non-linear Resistors MF-USMF020-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
MF-USMF020-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Design/Specification - MF Cert Mark Aug/2015
PCN Assembly/Origin - MF-yyyF, MF-xSMF Series May/2014
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
RUEF400K-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL;
V39ZA6P
V39ZA6P by Littelfuse is a VARISTOR with 25V max circuit RMS voltage and 6J energy absorbing capacity. With METAL OXIDE FILM technology, it operates b/w -55°C to 125°C. Ideal for surge protection in various applications due to its DISK PACKAGE shape and THROUGH HOLE mounting type.
V18AUMLA2220H
V18AUMLA2220H by Littelfuse is a VARISTOR with 18V operating voltage and 25J energy capacity. It has a metal oxide film technology, dual-ended terminals, and operates b/w -40°C to 150°C. Ideal for surge protection in automotive electronics due to AEC-Q200 compliance.
MF-R185-0-99
Bourns
The Bourns MF-R185-0-99 is a PTC resettable fuse with 30V operating voltage, ideal for overcurrent protection. It features radial terminal placement, matte tin finish, and operates b/w -40°C to 85°C. Commonly used in applications requiring bulk packaging and through-hole mounting.
NTCS0805E3103GMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %;
RXEF110K-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; Packing Method: TR; Minimum Operating Temperature: -40 Cel;
MF-RX375
The Bourns MF-RX375 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With reference standards CUL, TUV, UL, it offers temp range -40 to 85°C for bulk packing via through hole mount.
RXEF110-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: 0.15-0.25 OHMS AT 20 DEG CEL; Rated AC Voltage (URac): 72 V; Minimum Operating Temperature: -40 Cel;
B57321V2103J60
TDK
B57321V2103J60 by TDK is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3980 K thermal sensitivity index. It is used for temperature compensation in various applications due to its dual-ended terminal placement and surface mount package style. With an operating temperature range from -55°C to 125°C, it offers precise thermal sensing capabilities.
B59707A0120A062
TDK's B59707A0120A062 is a PTC thermistor with 75 ohm resistance, rated for 80V AC/DC. It features dual-ended terminals and wraparound shape, suitable for overcurrent protection applications. Operating temperature ranges from -40 to 125°C, making it ideal for surface mount installations in various electronic devices.
B72214S0301K101
The TDK B72214S0301K101 is a VARISTOR with 300V max circuit RMS voltage and 385V operating voltage. With a max energy absorption of 76J, it's ideal for surge protection in applications requiring high reliability and durability. The radial package style and through-hole mounting make it suitable for various electronic circuits.
NCP21WF104J03RA
Murata Manufacturing
Murata Manufacturing's NCP21WF104J03RA is a Non-linear Resistor with 100000 ohm resistance, 5% tolerance, and -40 to 125 °C operating temperature range. It is used for TEMPERATURE SENSING applications due to its NTC THERMISTOR type, WRAPAROUND terminals, and SMT package style.
RXEF090-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE; No. of Terminals: 2; Terminal Shape: WIRE;
B72220S0151K101
B72220S0151K101 by TDK is a VARISTOR with 150V RMS and 200V operating voltage. With a max energy absorption of 85J, it's ideal for surge protection in applications requiring high reliability. Featuring radial terminal placement and metal oxide technology, it operates b/w -40°C to 105°C.
EZJP0V6R8MA
Panasonic
EZJP0V6R8MA by Panasonic is a rectangular package varistor with dual-ended terminal placement. It has a max operating temperature of 85°C and operates at a voltage of 3.7V. This surface mount resistor is commonly used in applications that require protection against voltage surges or transients.
RF2649-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .13 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN;
MOV-10D561KTR
MOV-10D561KTR by Bourns is a VARISTOR with 70J energy capacity, 350V RMS voltage, and 460V operating voltage. Ideal for surge protection in circuits with -40 to 105°C temp range, it comes in radial package style for through-hole mounting.
V5.5MLA0603NH
V5.5MLA0603NH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy absorption capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is ideal for surge protection in SMT applications at temperatures ranging from -40°C to 125°C.
GA10K3A1IA
TE Connectivity
TE Connectivity's GA10K3A1IA is a non-linear resistor with 2 terminals, operating from -40 to 125°C. With a length of 76mm, it is ideal for temperature sensing applications.
V20P25P
V20P25P by Littelfuse is a 1W VARISTOR with 77J energy capacity, suitable for surge protection in various applications. With a max operating temperature of 125°C and radial terminal placement, it offers reliable protection against voltage spikes up to 31V RMS and DC. CUL, TUV, UL certified for quality assurance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-USMF110-2
The Bourns MF-USMF110-2 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 6V, and max temp of 85°C. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style.
MF-USMF005-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2.8 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; JESD-609 Code: e4;
MF-USMF150-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .03 ohm; Maximum Operating Temperature: 85 Cel; Length (Package): 3.43 mm; Terminal Finish: GOLD OVER NICKEL;
MF-USMF010-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .8 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: AEC-Q200; CUL; TUV; UL; JESD-609 Code: e4;
MF-USHT110KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 125 Cel; Additional Features: RMIN AT 23 DEG CEL; Terminal Shape: WRAPAROUND;
MF-USMF050-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .18 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4; Terminal Placement: DUAL ENDED;
MF-USHT150KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .025 ohm; Maximum Operating Temperature: 125 Cel; Package Style (Meter): SMT; Reference Standard: AEC-Q200, CUL, TUV;
MF-USML500/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .001 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 12 V; Reference Standard: CUL; TUV; UL;
MF-USML650/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .001 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Width (Package): 2.8 mm;
MF-USMF010
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Rated AC Voltage (URac): 30 V; No. of Terminals: 2;
MF-USHT050KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .3 ohm; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -40 Cel;
MF-USMF035-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: GOLD OVER NICKEL; Additional Features: RMIN AT 23 DEG CEL;
MF-USMF075-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .07 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Width (Package): 2.8 mm;
MF-USML350/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .002 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Maximum Circuit DC Voltage: 6 V;
MF-USMF175-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Minimum Operating Temperature: -40 Cel;
MF-USMF035
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4; Width (Package): 2.8 mm; Terminal Finish: GOLD OVER NICKEL;
MF-USMF175X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Placement: DUAL ENDED;
MF-USML380/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .002 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Terminal Placement: DUAL ENDED;
MF-USML400/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .002 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Terminal Placement: DUAL ENDED;
MF-USMF200X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Package Style (Meter): SMT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved