Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MF-USHT110KX-2 by Bourns is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 9V, and max temp of 125°C. It's used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style. Compliant with AEC-Q200, CUL, TUV standards.
Median Price
$0.602
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.910
100+ parts
$0.586
1k+ parts
$0.425
10k+ parts
$0.402
Newark
$1.180
$1.030
$0.672
$0.587
Master Electronics
-
$0.330
Verical
$0.472
Farnell
$0.534
$0.387
Element14
$0.670
$0.403
$0.400
Nova Conductors
Electro Sonic
$0.340
Bristol Electronics
Vyrian
Aztec Data Supply Inc.
$0.130
Corohmni
$0.334
Argo Parts USA
$0.412
Netroflash
$0.395
Advanced Electronics
$0.427
Semicontronic
$0.600
$0.585
$0.582
Robosynatics
Lucentia Tech
$22.598
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
$0.367
This thermistor is specifically designed for overcurrent protection, ensuring that the device it is connected to is safeguarded against excess currents.
Having dual ended terminal placement allows for easier installation and connection within a circuit, reducing complexity and potential errors.
The TR packing method with 7-inch tape reel provides convenience in handling and storage of these thermistors, making them suitable for automated assembly processes.
With a low resistance of 0.06 ohm, this thermistor offers efficient current flow and precise protection against overcurrent situations.
The Surface Mount Technology (SMT) package style allows for easy and space-saving mounting onto PCBs, enhancing the overall design and functionality of the product.
The wraparound terminal shape provides secure and reliable connections, reducing the risk of loose connections or disconnections.
With a maximum operating temperature of 125°C, this thermistor can withstand high temperature environments without compromising its performance.
The low minimum operating temperature of -40°C ensures that this thermistor can function effectively in a wide range of temperature conditions.
The gold terminal finish with a nickel barrier offers excellent conductivity and corrosion resistance, ensuring long-term reliability of the thermistor.
The compact height of 1.6 mm makes this thermistor suitable for applications with space constraints, allowing for versatile integration.
Being a PTC resettable fuse, this thermistor provides protection against overcurrent situations and can automatically reset once the fault is cleared, ensuring continuous operation.
With an operating voltage of 9V, this thermistor is compatible with a wide range of electronic devices and circuits, offering flexible usage.
The length of 3.43 mm provides a compact and efficient design for easy installation and integration into electronic assemblies.
The surface mounting type simplifies the installation process and allows for secure attachment to PCBs, enhancing the overall reliability of the product.
Compliance with industry standards such as AEC-Q200, CUL, and TUV ensures the quality and reliability of this thermistor for use in automotive and other applications.
The width of 2.8 mm offers a compact form factor for easy integration and compatibility with various electronic devices and circuits.
Non-linear Resistors MF-USHT110KX-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
MF-USHT110KX-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Design/Specification - MF-USHT1yyKX-2 Data Sheet Rev 15/Apr/2021
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Eic Semiconductor
BAV99-7-F
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Yangzhou Yangjie Electronics
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
First Components International
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
0ZCG0020AF2C
Bel Fuse
Bel Fuse's 0ZCG0020AF2C is a PTC resettable fuse with 0.8 ohm resistance and 60V operating voltage. It features dual-ended terminals, SMT package style, and temperature sensing application. With AEC-Q200, CUL, TUV, UL certifications, it operates b/w -40 to 85 °C for various circuit protection needs.
GMOV-14D271K
Bourns
Bourns GMOV-14D271K is a metal oxide varistor with max energy absorption of 155 J. It is used for overload protection in applications with max circuit RMS voltage of 275 V and operating voltage of 350 V. Its radial terminal placement and through hole mounting make it easy to install.
V3.5MLA0805LNH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
MINIASMDC014F-2
TE Connectivity
TE Connectivity's MINIASMDC014F-2 is a PTC resettable fuse with 1.5 ohm resistance and 60V operating voltage. It features dual-ended terminals, SMT package style, and is used for overcurrent protection applications. With AEC-Q200, UL, TS16949 standards compliance, it operates b/w -40 to 85 °C temperatures.
NTCS0603E3103FLT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3103FLT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3435 K thermal sensitivity index. Ideal for temperature sensing applications, it operates b/w -40 to 150 °C and features dual-ended terminals in a compact SMT package.
B72220P3271K101
TDK
B72220P3271K101 by TDK is a VARISTOR with 280J energy capacity, 275V RMS voltage, and 350V operating voltage. It has a radial shape for through-hole mounting applications in non-linear resistor circuits.
MICROSMD110F-2
TE Connectivity's MICROSMD110F-2 is a PTC resettable fuse with 2 terminals, rated for 6V AC voltage and 0.8W power dissipation. It is designed for temperature sensing applications, featuring dual-ended terminal placement in a rectangular surface mount package, suitable for use up to 85°C operating temperature.
RF2564-000
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 4.4 ohm; Rated Power Dissipation (P): .41 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL;
MF-MSMF020-2
The Bourns MF-MSMF020-2 is a PTC resettable fuse with a resistance of 0.4 ohm and an operating voltage of 30V. It is commonly used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mount mounting type.
PFRA.020
Schurter Ag
Schurter Ag's PFRA.020 is a PTC resettable fuse with resistance of 1.5 ohm and rated AC voltage of 40V. Its cylindrical package, radial terminal placement, and through-hole mounting make it ideal for applications requiring overcurrent protection in electronic circuits.
0603L025YR
0603L025YR by Littelfuse is a PTC resettable fuse with resistance of 0.5 ohm, operating voltage of 9V, and max circuit DC voltage of 9V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style.
RXEF025-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Additional Features: 1.25-1.95 OHMS AT 20 DEG CEL; Terminal Placement: RADIAL;
NTCLE100E3472HB0
Vishay Intertechnology NTCLE100E3472HB0 is a 4700 ohm NTC thermistor with -40 to 125 °C operating range. Ideal for temperature sensing applications, it has radial terminal placement and matte tin finish. With 3% tolerance and 0.5 W power dissipation, it offers high thermal sensitivity index of 3977 K.
RUEF900
Raychem
PTC RESETTABLE FUSE; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin (Sn); Dimensions: 29mm x 24.1mm x 3mm; Height (Package): 3 mm;
V05E25P
V05E25P by Littelfuse is a VARISTOR with 2.5J energy capacity, 25V RMS voltage, and 31V operating voltage. Ideal for surge protection in electronics, it has radial terminal placement and metal oxide film technology. With -40 to 85°C temp range, it's UL/TUV/CUL certified for reliability.
V33MLA1206H
V33MLA1206H by Littelfuse is a VARISTOR with 33 V operating voltage and 0.8 J energy capacity. It has a max circuit RMS voltage of 26 V, suitable for surge protection in electronic circuits. With surface mounting type and dual-ended terminals, it offers reliable overvoltage protection in compact designs.
2920L110/60MR-A
2920L110/60MR-A by Littelfuse is a PTC thermistor with resistance of 0.12 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type.
11026889-00
TE Connectivity's 11026889-00 is a non-linear resistor with 10000 ohm resistance, rated for temperatures from -55 to 90 °C. It features radial terminal placement and chassis mount package style, ideal for temperature sensing applications due to its thermal sensitivity index of 3694 K.
NTCS0805E3103FHT
Vishay Intertechnology's NTCS0805E3103FHT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3940 K. It is used for temperature sensing applications in a surface mount package with dual-ended terminals. Operating temperature ranges from -40 to 150 °C.
B57230V2103F260
B57230V2103F260 by TDK is a NTC thermistor with 10000 ohm resistance and 1% tolerance. It has dual-ended terminals, SMT package style, and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, it offers a rated power dissipation of 0.15 W in a compact package measuring 1mm x 0.5mm x 0.6mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-USMF110-2
The Bourns MF-USMF110-2 is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 6V, and max temp of 85°C. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style.
MF-USMF020-2
The Bourns MF-USMF020-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 30V, ideal for overcurrent protection applications. It features dual-ended terminals in a rectangular SMT package, with gold over nickel terminal finish. Operating temperature ranges from -40 to 85°C, meeting AEC-Q200, CUL, TUV, and UL standards.
MF-USMF005-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2.8 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; JESD-609 Code: e4;
MF-USMF150-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .03 ohm; Maximum Operating Temperature: 85 Cel; Length (Package): 3.43 mm; Terminal Finish: GOLD OVER NICKEL;
MF-USMF010-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .8 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: AEC-Q200; CUL; TUV; UL; JESD-609 Code: e4;
MF-USMF050-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .18 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4; Terminal Placement: DUAL ENDED;
MF-USHT150KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .025 ohm; Maximum Operating Temperature: 125 Cel; Package Style (Meter): SMT; Reference Standard: AEC-Q200, CUL, TUV;
MF-USML500/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .001 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 12 V; Reference Standard: CUL; TUV; UL;
MF-USML650/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .001 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Width (Package): 2.8 mm;
MF-USMF010
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Rated AC Voltage (URac): 30 V; No. of Terminals: 2;
MF-USHT050KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .3 ohm; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -40 Cel;
MF-USMF035-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: GOLD OVER NICKEL; Additional Features: RMIN AT 23 DEG CEL;
MF-USMF075-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .07 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Width (Package): 2.8 mm;
MF-USML350/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .002 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Maximum Circuit DC Voltage: 6 V;
MF-USHT035KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .4 ohm; Maximum Operating Temperature: 125 Cel; Operating Voltage: 30 V; Width (Package): 2.8 mm;
MF-USHT020KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .6 ohm; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Thermistor Application: OVERCURRENT PROTECTION;
MF-USHT010KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Maximum Operating Temperature: 125 Cel; Length (Package): 3.43 mm; Terminal Placement: DUAL ENDED;
MF-USHT075KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .1 ohm; Maximum Operating Temperature: 125 Cel; Height (Package): 1.2 mm; Minimum Operating Temperature: -40 Cel;
MF-USHT125KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .03 ohm; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Length (Package): 3.43 mm;
MF-USHT016KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .7 ohm; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Length (Package): 3.43 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved