Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
V42MLA1206NH by Littelfuse is a SMT varistor with 30V URac, 0.8J energy capacity, and 42V operating voltage. It has dual-ended terminals in a rectangular package for surge protection applications. With -40 to 125 °C temp range, it's ideal for surface mount installations requiring high transient voltage suppression.
Median Price
$0.524
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.161
100+ parts
$0.153
1k+ parts
10k+ parts
-
Mouser Electronics
$1.280
$0.743
$0.595
Future Electronics
$0.510
Arrow
$0.527
Verical
$0.133
DigiKey
$0.520
TTI
$0.534
TTI Europe
$0.106
Master Electronics
$0.448
$0.428
Newark
$0.846
$0.726
Element14
$1.400
$0.744
$0.702
Farnell
$3.940
$3.020
$2.960
Chip1Stop
Freelance Electronics
$0.330
$0.397
$0.327
Nova Conductors
$0.529
Mobius Materials
$0.810
$0.649
TME
$1.100
$0.518
$0.378
$0.362
IBS Electronics
$0.825
NAC Semi
$2.060
Vyrian
Chip Stock
ComSIT Distribution GmbH
Rutronik
$0.086
Pegasus Components GmbH
EMSNET
Bristol Electronics
Atlantic Semiconductor
ACDS - Activité Composants Distribution Service
PC Components Company LLC
Contempo Components LLC
Semicontronic
$0.090
$0.088
$0.087
Advanced Electronics
Corohmni
$0.277
Aztec Data Supply Inc.
$0.429
Aranea Global
$0.497
Argo Parts USA
$0.513
Perfect Parts
Metaverse IC Inc.
Kepictronics
GreenTree Electronics
Glotronic Ltd.
RC Electronics
$2.900
$2.730
$2.680
Continental Prestige Electronics
$0.627
$0.438
$0.373
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
DUAL ENDED - Provides flexibility in installation and connection options.
RECTANGULAR PACKAGE - Allows for efficient use of space on circuit boards.
0.8 J - Offers reliable protection against power surges or spikes.
TR, PLASTIC, 7 INCH - Facilitates convenient storage and handling during transportation.
2 - Simplifies the connection process for users.
SMT - Enables easy and secure mounting on the surface of circuit boards.
30 V - Suitable for a wide range of AC voltage applications.
WRAPAROUND - Enhances the durability and stability of the connection.
125 °C - Ensures reliable performance in various environmental conditions.
40 °C - Suitable for use in both extreme cold and hot temperatures.
MATTE TIN OVER NICKEL - Provides corrosion resistance for a longer lifespan.
1.8 mm - Enables a compact and space-saving design.
VARISTOR - Ideal for applications requiring non-linear resistance characteristics.
30 V - Offers protection against overvoltage conditions in circuits.
42 V - Suitable for applications requiring stable and consistent voltage levels.
4.06 mm - Fits easily within standard circuit board dimensions.
SURFACE MOUNT - Allows for quick and easy installation without the need for additional hardware.
42 V - Ensures compatibility with various DC voltage requirements.
1.65 mm - Contributes to the overall compact and efficient design of the product.
Non-linear Resistors V42MLA1206NH attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated AC Voltage (URac):
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V42MLA1206NH Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Design/Specification - MLV Change To Lead Free 19/Feb/2016
PCN Part Number - MLV Suffix Chgs 15/May/2020
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
PTCCL05H110HBE
Vishay Intertechnology
Vishay Intertechnology's PTCCL05H110HBE is a PTC thermistor with 3000 ohm resistance, rated for 265 V AC voltage. Ideal for overload protection applications, it has a radial terminal placement and disk package shape. With a tolerance of 20%, it operates b/w -25°C to 125°C, suitable for through-hole mounting.
RXEF030-AP
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Shape (Package): DISK PACKAGE; Terminal Placement: RADIAL;
NCP21XV103J03RA
Murata Manufacturing
NCP21XV103J03RA by Murata is a Non-linear Resistor with 10000 ohm resistance, operating voltage of 5 V, and thermal sensitivity index of 3900 K. It is used for temperature sensing applications due to its NTC thermistor type, dual-ended terminal placement, and surface mounting type.
RF1180-000
TE Connectivity
TE Connectivity's RF1180-000 is a PTC resettable fuse with 0.04 ohm resistance and 24V operating voltage. It features dual-ended terminals, SMT package style, and WRAPAROUND shape. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and rated power dissipation of 1W.
MINISMDC075F/24-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .09 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; JESD-609 Code: e3;
V275LA40APX1347
V275LA40APX1347 by Littelfuse is a varistor with rated AC voltage of 275V and max energy absorption of 140J. It operates b/w -55°C to 125°C, suitable for temperature compensation applications. With radial terminal placement and metal oxide film technology, it offers reliable protection in various circuits.
0ZCG0150BF2C
Bel Fuse
Bel Fuse's 0ZCG0150BF2C is a PTC resettable fuse with resistance of 0.04 ohm and rated power dissipation of 1W. It is used for temperature sensing applications, featuring dual-ended terminals and surface mounting type. Operating voltage is 24V with operating temperature range from -40 to 85°C.
ERTJ0ES104F
Panasonic ERTJ0ES104F is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in various applications due to its SMT package style and thermal sensitivity index of 4390 K. Dual-ended terminals make it suitable for surface mounting methods.
SIOV-S20K275
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 105 Cel; Tolerance: 10 %; Reference Standard: UL, CSA;
NTCS0805E3103GMT
The Vishay Intertechnology NTCS0805E3103GMT is a Non-linear Resistor with 10000 ohm resistance and 2% tolerance. It is used for temperature sensing applications, featuring a thermal sensitivity index of 3570 K and operating temperatures ranging from -40 to 150 °C. The thermistor comes in a rectangular SMT package with dual-ended terminals for surface mounting.
B72207S0300K101
The TDK B72207S0300K101 is a VARISTOR with 30V max circuit RMS voltage, 2J energy absorption, and -40 to 105°C operating temp. Ideal for surge protection in electronics due to its METAL OXIDE tech and RADIAL terminal placement.
311P18-07S7R6
TE Connectivity's 311P18-07S7R6 is a NTC thermistor with a resistance of 10000 ohm. It has a rated temperature range of -55 to 90 °C and is used for temperature sensing applications. Its radial terminal placement and through hole mounting make it easy to install.
TRF250-145U
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 3.5 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 3.8 mm; Maximum Circuit RMS Voltage: 250 V;
GA1K2A1
TE Connectivity's GA1K2A1 is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a length of 76mm, it is used for temperature sensing applications.
MF-USHT150KX-2
Bourns
The Bourns MF-USHT150KX-2 is a PTC resettable fuse with resistance of 0.025 ohm, operating voltage of 9V, and max temp of 125°C. It's used for overcurrent protection in automotive applications due to its AEC-Q200 compliance and surface mount package style.
GA10K3A1IB
TE Connectivity's GA10K3A1IB is a 10000 ohm non-linear resistor with thermal sensitivity index of 3976 K. It is used for temperature sensing applications, featuring radial terminal placement and chassis mount package style. Operating temperature ranges from -40 to 125 °C.
0ZCM0002FF2G
Bel Fuse's 0ZCM0002FF2G is a PTC resettable fuse with 12 ohm resistance, suitable for non-linear resistor applications. It features dual-ended terminal placement, matte tin finish, and operates at temperatures ranging from -40 to 85 °C. This SMT package has a compact size of 1.8mm x 1mm x 0.85mm and can handle up to 60V DC voltage.
2920L200/24DR
2920L200/24DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm, operating voltage of 24V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and wraparound terminal shape. The rectangular package measures 7.98mm x 5.44mm x 1.25mm and can operate b/w -40°C to 85°C temperature range.
MF-R050-2-17
The Bourns MF-R050-2-17 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and max temp of 85°C. It's used for overcurrent protection in applications requiring radial terminal placement and matte tin finish. Ideal for CUL, TUV, UL reference standards.
TFPT0805L1001FM
Vishay Intertechnology's TFPT0805L1001FM is a PTC thermistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and rectangular package shape. Operating temperatures range from -55°C to 150°C, making it suitable for diverse environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V42MLA1206NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Length (Package): 4.06 mm; Height (Package): 1.8 mm;
V42MLA1206NHAUTO
V42MLA1206NHAUTO by Littelfuse is a metal oxide varistor with a max energy absorbing capacity of 0.8 J. It is designed for surface mount applications and has a max operating temperature of 125°C. This varistor is commonly used in automotive electronics to protect against voltage surges.
V42MLA1206H
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Package Style (Meter): Chip / Die;
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 150 Cel; Maximum Circuit DC Voltage: 42 V;
V42MLA1206H23
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Operating Voltage: 42 V; Package Style (Meter): SMT;
Littelfuse V42MLA1206H23 is a VARISTOR with 30V RMS and 42V DC max circuit voltage. It has 0.8J energy capacity, -55 to 150°C operating temp range, and SMT package style. Ideal for surge protection in electronics due to its dual-ended terminals and compact size of 3.2x1.6x1.8mm (LxWxH).
V42MLA1206NA
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Energy Absorbing Capacity: .8 J; Height (Package): 1.8 mm; Width (Package): 1.65 mm;
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Packing Method: BULK; JESD-609 Code: e3; Height (Package): 1.8 mm;
V42MLA1206NT
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): 1.65 mm; Packing Method: TR, PLASTIC, 13 INCH; Terminal Shape: WRAPAROUND;
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; No. of Terminals: 2; Terminal Finish: MATTE TIN OVER NICKEL;
V42MLA1206NR
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Terminal Placement: DUAL ENDED; Terminal Shape: WRAPAROUND;
V42MLA1206N
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Terminal Placement: DUAL ENDED; Terminal Finish: MATTE TIN OVER NICKEL;
V42MLA1206T
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Rated Temperature: 150 Cel;
V42MLA120623
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Operating Voltage: 42 V; Length (Package): 3.2 mm;
V42MLA1206T23
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -55 Cel; Terminal Shape: WRAPAROUND;
V42MLA1206A23
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Operating Voltage: 42 V; Terminal Placement: DUAL ENDED;
V42MLA1206
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Rated Temperature: 125 Cel; Maximum Circuit DC Voltage: 42 V;
V42MLA1206A
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Maximum Energy Absorbing Capacity: .8 J; Terminal Shape: WRAPAROUND;
V42MLA1206NHX3081
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved