Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Kepictronics
S.R.D Solutions
A-Z Elektronik GmbH
Authorized Procurement Solutions
Alle Elektronik GmbH
Corphita
Supply Digital
Cellphone ICs AT86RF212-ZUR attributes and parameters. Explore more Cellphone ICs devices from Atmel
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
AT86RF212-ZUR Telecommunications trade compliance attributes, and parameters.
ECCN
5A992.A
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Atmel Corporation was a creator and manufacturer of semiconductors before being subsumed by Microchip Technology in 2016. Atmel was founded in 1984. The company focused on embedded systems built around microcontrollers
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
EU2B-YS3103F
Idec
ROTARY SWITCH;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
Silicon Standard
Bytesonic Electronics
SKY13526-485LF
Skyworks Solutions
SKY13526-485LF by Skyworks Solutions is a 14-terminal cellphone IC with a square package shape and chip carrier style. Operating b/w -30°C to 90°C, it's ideal for RF and baseband circuits in telecom applications. With a compact size of 2x2mm and no-lead terminals, it offers high performance in a small footprint.
LENA-R8001M10-00C
U-blox Ag
RF AND BASEBAND CIRCUIT;
ADL5592ACPZ-R7
Analog Devices
ADL5592ACPZ-R7 by Analog Devices is a cellphone IC with 40 terminals in a square chip carrier package. It operates b/w -40 to 85 °C, suitable for industrial use. With a nominal voltage of 5V, it's ideal for baseband circuit applications in telecommunications.
HMC682LP6C
Analog Devices' HMC682LP6C is a 40-terminal cellphone IC in a square chip carrier package with tin/lead finish. Operating temperature range from -40 to 85°C, suitable for industrial telecom applications. Features RF and baseband circuits, nominal voltage of 5V, and terminal pitch of 0.5mm.
MAX-7W-0
The U-blox Ag MAX-7W-0 is a CELLPHONE IC with AEC-Q100 screening, INDUSTRIAL temp grade, and RF/BASEBAND circuit type. It has 18 terminals in MICROELECTRONIC ASSEMBLY package style for applications requiring reliable performance in harsh environments. Operating from -40 to 85 °C, it offers compact dimensions of 9.7mm width and 10.1mm length with a low profile of 2.7mm for space-constrained designs.
TCM4400EPETR
Texas Instruments
TCM4400EPETR by Texas Instruments is a cellphone IC with 80 terminals in a square flatpack package. It operates b/w -25°C to 85°C, with a nominal voltage of 3V. This baseband circuit has gull wing terminals and is suitable for telecom applications.
HMC689LP4ETR
Analog Devices' HMC689LP4ETR is a Cellphone IC with BICMOS technology, operating at -40 to 85°C. It features 24 terminals in a square chip carrier package style, suitable for RF and baseband circuits. The IC has a nominal voltage of 5V and matte tin terminal finish, making it ideal for telecom applications.
MAX2309ETI+T
MAX2309ETI+T by Analog Devices is a cellphone IC with 28 terminals in a square package. It operates at -40 to 85 °C, with power supplies of 3/3.3V. Ideal for baseband circuits, it has a terminal pitch of 0.5mm and low supply current of 0.0415mA.
TRF1015DBLE
TRF1015DBLE by Texas Instruments is a cellphone IC with 20 terminals, operating temp. range of -40 to 85°C, and supply voltage of 3.75V. It's a RF front end circuit in small outline package suitable for telecom applications.
TLV320AC56CDWR
TLV320AC56CDWR by Texas Instruments is a Cellphone IC with 20 terminals, CMOS technology, and 3V supply voltage. It is a BASEBAND CIRCUIT for telecom applications, operating b/w 0-70°C in small outline package style.
TCM320AC57IDW
TCM320AC57IDW by Texas Instruments is a Cellphone IC with 20 terminals, operating at temperatures from -40 to 85°C. It features a 13-bit linear coding and A-Law companding law, suitable for baseband circuit applications. This small outline package has a rectangular shape, gull wing terminal form, and requires a 5V supply voltage.
BGA725L6E6327FTSA1
Infineon Technologies
Infineon's BGA725L6E6327FTSA1 is a cellphone IC with 6 terminals in a rectangular chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features a nominal voltage of 1.8V and is designed for baseband circuit applications.
ADRF6650ACPZ-RL7
Analog Devices' ADRF6650ACPZ-RL7 is a 56-terminal cellphone IC with BICMOS technology, operating from -40 to 105 °C. It features RF and baseband circuits, suitable for telecom applications. The chip carrier package has a very thin profile, measuring 8mm x 8mm in size.
MAX2031ETP/-T
MAX2031ETP/-T by Analog Devices is a Cellphone IC with 20 terminals, operating at -40 to 85 °C. It features BICMOS technology, RF and baseband circuit for telecom applications, and requires 5V supply voltage with a max current of 0.1mA.
ISL5216KIZ
Renesas Electronics
ISL5216KIZ by Renesas Electronics is a CELLPHONE IC with 196 terminals in a SQUARE package. It operates b/w -40 to 85°C, suitable for INDUSTRIAL use. This BASEBAND CIRCUIT has a nominal voltage of 2.5V and features TIN SILVER COPPER terminal finish.
HMC495LP3
Analog Devices' HMC495LP3 is a cellphone IC with 16 terminals in a square chip carrier package. Operating b/w -40 to 85°C, it's ideal for RF and baseband circuits in telecom applications. With a nominal voltage of 3.3V, this surface-mount IC has a compact size of 3x3mm and terminal pitch of 0.5mm.
CC2511F32RSPR
Texas Instruments CC2511F32RSPR is a 36-terminal cellphone IC with CMOS technology. Operating b/w 0-85°C, it has a supply voltage of 3.3V and terminal pitch of 0.5mm. Ideal for RF and baseband circuits, this IC comes in a square chip carrier package style with nickel/palladium/gold finish.
CC2510F8RSP
Texas Instruments CC2510F8RSP is a cellphone IC with 36 terminals, operating at -40 to 85°C. It features a 3V supply voltage, CMOS technology, and RF/baseband circuit for telecom applications. The chip carrier package has a very thin profile, nickel palladium gold finish, and quad terminal position.
ADF7021-NBCPZ-RL
Analog Devices' ADF7021-NBCPZ-RL is a cellphone IC with 48 terminals, operating at -40 to 85°C. It features a 3V supply, CMOS technology, and quad terminal position. Ideal for baseband circuits in telecom applications due to its compact square chip carrier package style.
AD9361BBCZ-REEL
AD9361BBCZ-REEL by Analog Devices is a CELLPHONE IC with 144 terminals in a GRID ARRAY package. It operates b/w -40 to 85°C, suitable for INDUSTRIAL telecom applications. Features include TIN SILVER COPPER finish, 1.3V supply voltage, and RF/BASEBAND circuit type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Atmel
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved