Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 901-143-6RFX is an SSMA connector with gold termination, PTFE insulator, and 50 ohm impedance. It operates b/w -65 to 165 °C, has 0.13 dB insertion loss, and can handle up to 18 GHz frequency. Ideal for RF applications requiring high durability and low VSWR.
Median Price
$8.566
Lifecycle Status
Suppliers In-Stock
56
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$6.314
100+ parts
$5.245
1k+ parts
$5.088
10k+ parts
$5.014
Chip1Stop
$6.730
-
PEI Genesis
$6.840
Richardson RFPD
$7.710
$6.530
Farnell
$8.540
$6.270
$5.750
Interstate Connecting
$8.593
$7.138
$6.725
RS Americas
$9.240
$7.530
TTI
$9.550
$7.370
$6.570
Mouser Electronics
$10.200
$6.630
DigiKey
$7.365
$6.261
Newark
$11.970
$9.140
$8.970
Element14
$13.360
$9.930
$9.130
Powell Electronics
$7.750
$5.870
Master Electronics
$7.900
$7.820
Verical
$9.294
$9.247
Arrow
$6.282
$6.078
Freelance Electronics
$4.039
$4.241
$3.999
DF Sales Co.
$4.800
Component Electronics Inc.
$6.150
$4.620
$4.000
Nova Conductors
$6.632
TME
$8.850
$7.360
TestEquity
$10.510
IBS Electronics
$13.843
$12.272
Electro Sonic
$6.200
$5.480
VNN
Vyrian
NAC Semi
$14.950
$13.800
ECAB
SPM Sales
Elcom Components
Cyclops Electronics Ltd
PC Components Company LLC
Chip Stock
Sensible Micro Corp
Connector Distribution Corp
Right Parts Inc.
Atlantic Semiconductor
Inventory MP
American Microsemiconductor Inc.
Sunrise Surplus Inc.
MISTER SPROCKETS
Semi Source
Holdelec - ElecDif-Pro
Mil-Aero Solutions, Inc.
Lantek
Prism Electronics
Electronic Expediters
Electronics Depot
Bristol Electronics
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Semtec, LLC
LWI Electronics Inc
EMSNET
Rotakorn
Semicontronic
$4.140
$4.036
$4.016
Ampacity Inc.
Aztec Data Supply Inc.
$5.796
Gateway Technologies
$6.017
$5.355
Advanced Electronics
$6.053
$5.751
Aranea Global
$6.499
$6.239
Singapore Electronics
$6.618
$6.154
$5.890
$5.625
Modulus Dynamics
$6.884
$6.815
$6.609
Continental Prestige Electronics
$7.440
$5.380
Allen Electronics Distributors
$7.650
$5.990
Kepictronics
Argo Parts USA
Glotronic Ltd.
Robosynatics
$0.055
GreenTree Electronics
Perfect Parts
Corohmni
Lucentia Tech
$0.070
Abacus Technologies
Eastek
Akira Global LLC
High insulation resistance ensures minimal signal loss and interference, making this connector reliable for high-frequency applications.
Low insertion loss indicates efficient signal transmission without significant loss of power, maintaining signal integrity.
Gold termination contact finish offers excellent conductivity and corrosion resistance, ensuring long-term reliability and stable performance.
With a maximum operating frequency of 18 GHz, this connector is suitable for high-frequency applications such as RF communication and testing equipment.
With a durability of 100 cycles, this connector can withstand frequent mating and unmating cycles without degradation in performance, ensuring reliability in long-term use.
SSMA Connectors 901-143-6RFX attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
901-143-6RFX Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
EU2B-YS3203F
Idec
ROTARY SWITCH;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
901-10512-2
Amphenol
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
142-1711-026
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: RECEPTACLE; Contact Material: NOT SPECIFIED;
142-0761-891
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; JESD-609 Code: e4; Additional Features: VSWR: 1.41 AT 18 GHZ;
142-0701-631
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Termination Contact Finish: GOLD (30); Characteristic Impedance: 50 ohm;
5251
Carlisle Interconnect Technologies
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Depth: .31 inch; No. of Ports: 1; Manufacturer Series: 5251;
1051655-1
TE Connectivity
TE Connectivity's 1051655-1 SSMA Connector features a body length of 1.187", insertion loss of 0.15 dB, and insulation resistance of 5000000000 ohm. Ideal for RF applications with RG 188 cable types, it operates b/w -65 to 165 °C with a max frequency of 12.4 GHz.
1050547-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Ports: 1;
UBJ27
Trompeter Electronics
RF BNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Diameter: .38 inch; Contact Style: COAX; Total No. of Contacts: 1;
23N-50-0-30/133NE
Huber+suhner Ag
23N-50-0-30/133NE by Huber+suhner Ag is an RF SMA connector with a characteristic impedance of 50 ohm and max operating frequency of 11 GHz. It features a threaded coupling type, brass shell material, and durability of 500 cycles. Ideal for applications requiring reliable cable and panel mounting in high-frequency environments up to 165°C.
067.42.2412.226
Ims Connector Systems
067.42.2412.226 by Ims Connector Systems is an RF SMA connector with threaded coupling, gold over nickel termination, and PTFE insulator. It has a VSWR of 1.25, operates up to 2 GHz, and is ideal for panel mount applications requiring a 50 ohm impedance connection.
142-1701-616
Bel Fuse
Bel Fuse 142-1701-616 is an RF SMA connector with 50 ohm impedance, 0.06 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications, it offers a durability of 500 cycles and operates b/w -65 to 165°C temperatures at frequencies up to 26.5 GHz.
132331
Amphenol 132331 is an RF SMA connector with a 0.363" body depth, gold shell finish, and brass shell material. It features a male contact gender, plug body style, and coax contact style. Suitable for commercial applications requiring reliable straight mounting with locking option.
0732512201
Molex
Molex 0732512201 is an RF SMA CONNECTOR with THREADED coupling. Featuring 50 ohm impedance, it has FEMALE contact gender and RIGHT ANGLE mounting style. Ideal for BOARD mounting in applications requiring SSMA Connectors like JACK body style with SOLDER termination.
R125.325.000
Radiall S A
R125.325.000 by Radiall S A is an RF SMA connector with a 50 ohm impedance, 0.13 dB insertion loss, and 1.19 VSWR. It is ideal for applications requiring high durability, such as commercial use in cable and panel mounting setups up to 18 GHz frequency range.
1052902-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Mounting Style: STRAIGHT; IEC Conformity: NO;
132236
Amphenol 132236 is an RF SMA connector with threaded coupling, gold termination contact finish, and 0.14 dB insertion loss. Ideal for applications requiring a 50 ohm characteristic impedance, it operates at frequencies up to 12.4 GHz and features a female gendered jack body style suitable for crimp solder terminations on cables.
SF2911-60172
Sv Microwave
RF SMA/SSMA Connectors;
J01151A0201
Telegartner Karl Gartner
Telegartner Karl Gartner's J01151A0201 is an RF SMA connector with gold termination, 50 ohm impedance, and 12.4 GHz operating frequency. Ideal for panel mounting in applications requiring threaded coupling, such as high-frequency communication systems. IEC conformity ensures quality performance.
142-0701-801
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Ports: 1;
M39012553028
Amphenol M39012553028 SSMA Connector has 50 ohm impedance, 1400VAC dielectric voltage, and 12.4 GHz operating frequency. Ideal for RF applications with RG-142 cable type, it offers durability of 500 cycles and MIL-C-39012 reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-144-8RFX
Amphenol 901-144-8RFX is an RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and brass shell for durability in high-temp environments.
901-10510-2
Amphenol's 901-10510-2 is an RF SMA connector with a threaded coupling type. It has a max operating frequency of 26.5 GHz and can withstand temperatures ranging from -65 to 165°C. This connector, suitable for board mounting, is commonly used in applications requiring high insulation resistance and low contact resistance.
901-144
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Total No. of Contacts: 1;
901-155-16
Amphenol 901-155-16 is an RF SMA connector with a dielectric voltage of 1400VAC, operating from -65 to 165°C. It has a gold finish, brass shell, and PTFE insulator suitable for RG-174/U cables. With a durability of 500 cycles, it's ideal for commercial applications requiring a 50 ohm impedance connection.
901-10025-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .25 dB; Termination Contact Finish: GOLD; MIL Conformity: NO;
901-10385
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: GOLD; Shell Material: BRASS; Voltage Standing Wave Ratio: 1.3;
901-10423
RF SMA CONNECTOR;
901-10512-1
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
901-10029-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 901-10029-RFX; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG;
901-144-3
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Panel Mount: NO;
901-10512-3
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
901-144-4
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: NOT SPECIFIED;
901-10011
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 12.4 GHz; DIN Conformance: NO; Mounting Type: CABLE;
901-10309
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Shell Finish: GOLD; Contact Style: COAX; Mounting Option-1: LOCKING;
901-10172
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 700VAC; Body Width: .411 inch; Insulator Material: POLYTETRAFLUOROETHYLENE; Insulator Color: NATURAL;
901-10387
RF SMA CONNECTOR; Reliability: COMMERCIAL; Termination Type: SURFACE MOUNT; Voltage Standing Wave Ratio: 1.16; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
901-101-15
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Cable Types: RG-400/U;
901-1GA200000AE
901-143-4
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Contact Finish: GOLD; Body Depth: .594 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved