Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's 901-10510-2 is an RF SMA connector with a threaded coupling type. It has a max operating frequency of 26.5 GHz and can withstand temperatures ranging from -65 to 165°C. This connector, suitable for board mounting, is commonly used in applications requiring high insulation resistance and low contact resistance.
Median Price
$8.653
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$6.695
100+ parts
$6.360
1k+ parts
10k+ parts
-
Farnell
$7.830
$6.330
$5.920
Heilind Electronics
$8.320
$6.710
$6.500
TTI Europe
$8.473
$6.338
Interstate Connecting
$8.833
$7.338
$6.913
Avnet
$9.459
$6.139
$5.963
TTI
$9.460
$5.950
$5.750
DigiKey
$10.460
$7.553
$6.421
Mouser Electronics
$10.790
$7.970
$6.550
Element14
$12.350
$10.760
$10.400
Newark
$14.490
$10.860
$10.250
Master Electronics
$5.800
$5.610
Verical
$9.502
$9.127
Arrow
$8.324
Powell Electronics
$5.660
Chip1Stop
$8.350
TME
$15.340
$10.630
IBS Electronics
$8.178
$7.966
Electro Sonic
$6.460
$5.350
VNN
Nova Conductors
Vyrian
Corohmni
$2.502
Ampacity Inc.
$4.230
Semicontronic
$5.360
$5.226
$5.199
Aztec Data Supply Inc.
$5.385
Gateway Technologies
$6.000
$5.339
Singapore Electronics
$6.600
$6.137
$5.873
$5.609
Advanced Electronics
Continental Prestige Electronics
$7.050
$5.820
Authorized Procurement Solutions
Argo Parts USA
Bastille Electronics
Eastek
High insulation resistance ensures signal integrity and reduces the risk of electrical shorts, making this connector reliable for high-frequency applications.
Threaded coupling provides a secure connection that is less likely to loosen or disconnect during use, ensuring consistent performance.
With a high maximum operating temperature, this connector can withstand a wide range of environmental conditions, making it versatile for various applications.
The low minimum operating temperature allows this connector to function in extremely cold environments without compromising performance.
RF SMA connectors are commonly used in telecommunications and networking applications, making this product compatible with a wide range of devices.
With a durability of 500 cycles, this connector can withstand multiple connections and disconnections without degrading in performance, ensuring a long lifespan.
Designed for board mounting, this connector is easy to install and provides a secure connection to the circuit board for stable performance.
Having a characteristic impedance of 50 ohm ensures optimal signal transfer and compatibility with standard RF equipment, making this connector a reliable choice for RF applications.
Solder termination offers a strong and reliable connection, ensuring stable signal transmission and reducing the risk of signal loss or interference.
Female contacts are commonly used in RF connectors for their durability and reliability, making this connector suitable for various applications.
Low contact resistance helps minimize signal loss and ensures high-quality signal transmission, making this connector ideal for high-frequency applications.
Right angle mounting style allows for a space-saving installation and can accommodate tight spaces, making this connector versatile for different mounting configurations.
Coaxial contact style offers superior signal performance and reduced signal distortion, making this connector suitable for high-frequency and high-speed applications.
With a high maximum operating frequency of 26.5 GHz, this connector can handle high-speed data transmission and is ideal for applications requiring a wide bandwidth.
SSMA Connectors 901-10510-2 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
Durability:
Filter Feature:
Insulation Resistance:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Termination Type:
Total No. of Contacts:
901-10510-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
EU2B-YS3103F
Idec
ROTARY SWITCH;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
901-9531-12
Amphenol
Amphenol 901-9531-12 is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.1 VSWR. Ideal for applications requiring a durable stainless steel shell, gold-plated contacts, and a max operating frequency of 12.4 GHz in commercial settings.
M39012/80B3101
TE Connectivity's M39012/80B3101 is a threaded RF SMA connector with a body length of 0.68 inch and depth of 0.666 inch. It has an insulation resistance of 5G ohm, operates at temperatures ranging from -65 to 165 °C, and is commonly used in MIL-C-39012 applications.
11_SMA-50-2-15/111_NE
Huber+suhner Ag
11_SMA-50-2-15/111_NE by Huber+suhner Ag is a threaded RF SMA connector with 50 ohm impedance, suitable for commercial applications. Featuring gold shell finish, it operates from -65 to 165 °C and can withstand up to 18 GHz frequency. With durability of 500 cycles, it is ideal for cable mounting in various industries.
132255
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 132255; Mating Contact Finish: GOLD; Coupling Type: THREADED;
132173
Amphenol 132173 is an SSMA connector with a threaded coupling type. It has a max operating frequency of 12.4 GHz and can withstand temperatures from -65 to 165 °C. This plug-style connector is commonly used in RF applications requiring a durable, high-frequency connection.
R125.153.002
Radiall S A
R125.153.002 by Radiall S A is an SSMA Connector with 5000000000 ohm Insulation Resistance, 0.18 dB Insertion Loss, and 750VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 12.4 GHz, this connector features a GOLD shell finish, POLYTETRAFLUOROETHYLENE insulator material, and RIGHT ANGLE mounting style.
M39012/55-3009
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Manufacturer Series: SMA; Coupling Type: THREADED;
R125.464.274
The Radiall S A R125.464.274 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.3 dB and a VSWR of 1.1, making it ideal for applications requiring high-frequency signal transmission up to 18 GHz, such as in telecommunications and aerospace industries.
1053091-1
TE Connectivity's 1053091-1 SSMA Connector features threaded coupling, PTFE insulator, and gold shell finish. With a 50 ohm impedance and operating frequency up to 18 GHz, it is ideal for RF applications requiring reliable commercial performance in temperatures ranging from -65°C to 125°C.
142-0701-231
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Characteristic Impedance: 50 ohm;
2037-5008-00
TE Connectivity's 2037-5008-00 SSMA Connector features an Insulation Resistance of 10^10 ohm, Insertion Loss of 0.07 dB, and Dielectric Withstanding Voltage of 750VAC. Ideal for RF applications up to 18 GHz with RG-188 cable types, this connector has a threaded coupling type and operates b/w -65°C to 105°C.
2921-6002
Sv Microwave
The SV Microwave 2921-6002 SSMA Connector features a dielectric voltage of 1400VAC, insulation resistance of 5G ohm, and operating frequency up to 18GHz. Ideal for RF applications requiring a durable female jack connector with a characteristic impedance of 50 ohm.
M39012/60-3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Panel Mount: YES; Mounting Style: STRAIGHT;
M39012/93-3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-C-39012; Mounting Type: BOARD; Mounting Style: STRAIGHT;
R125176000
The Radiall S A R125176000 SSMA Connector features 0.25 dB insertion loss, GOLD termination contact finish, and threaded coupling type. Ideal for RF applications up to 12.4 GHz, with a characteristic impedance of 50 ohm. Suitable for cable mounting with right angle plug style.
73251-2123
Molex
Molex 73251-2123 is an RF SMA connector with gold shell finish, PTFE insulator, and brass shell material. It has a characteristic impedance of 50 ohm and is used in commercial applications for board mounting with surface mount termination.
CONSMA002-SMD-G
Linx Technologies
The Linx Technologies CONSMA002-SMD-G is an RF SMA connector with a threaded coupling type, gold shell finish, and surface mount termination. It features a body length of 0.276", body diameter of 0.21", and insulator material made of PTFE. Ideal for applications requiring a right angle mounting style and female contact gender in SSMA connectors.
M39012/59-3009
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-C-39012; Panel Mount: YES; Coupling Type: THREADED;
142-0403-011
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE; Termination Type: CRIMP/SOLDER; Voltage Standing Wave Ratio: 1.4;
M39012/55-3030
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: SMA; Additional Features: STANDARD: MIL-C-39012; DIN Conformance: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-144-8RFX
Amphenol 901-144-8RFX is an RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and brass shell for durability in high-temp environments.
901-143-6RFX
Amphenol 901-143-6RFX is an SSMA connector with gold termination, PTFE insulator, and 50 ohm impedance. It operates b/w -65 to 165 °C, has 0.13 dB insertion loss, and can handle up to 18 GHz frequency. Ideal for RF applications requiring high durability and low VSWR.
901-144
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Total No. of Contacts: 1;
901-155-16
Amphenol 901-155-16 is an RF SMA connector with a dielectric voltage of 1400VAC, operating from -65 to 165°C. It has a gold finish, brass shell, and PTFE insulator suitable for RG-174/U cables. With a durability of 500 cycles, it's ideal for commercial applications requiring a 50 ohm impedance connection.
901-10025-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .25 dB; Termination Contact Finish: GOLD; MIL Conformity: NO;
901-10385
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: GOLD; Shell Material: BRASS; Voltage Standing Wave Ratio: 1.3;
901-10423
RF SMA CONNECTOR;
901-10512-1
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
901-10029-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 901-10029-RFX; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG;
901-10512-2
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
901-144-3
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Panel Mount: NO;
901-10512-3
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
901-144-4
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: NOT SPECIFIED;
901-10011
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 12.4 GHz; DIN Conformance: NO; Mounting Type: CABLE;
901-10309
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Shell Finish: GOLD; Contact Style: COAX; Mounting Option-1: LOCKING;
901-10172
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 700VAC; Body Width: .411 inch; Insulator Material: POLYTETRAFLUOROETHYLENE; Insulator Color: NATURAL;
901-10387
RF SMA CONNECTOR; Reliability: COMMERCIAL; Termination Type: SURFACE MOUNT; Voltage Standing Wave Ratio: 1.16; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
901-101-15
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Cable Types: RG-400/U;
901-1GA200000AE
901-10496
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Ports: 1; Mounting Type: BOARD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved