Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 901-144 is an RF SMA connector with 0.13 dB insertion loss, 1.25 VSWR, and 50 ohm impedance. It features gold termination contact finish and threaded coupling type for high-frequency applications up to 18 GHz. Ideal for commercial use in board-mounted systems requiring reliable signal transmission.
Median Price
$12.298
Lifecycle Status
Suppliers In-Stock
49
In-Stock Inventory
1k+
Newark
1+ parts
$9.180
100+ parts
1k+ parts
10k+ parts
-
Arrow
$10.791
$9.204
$8.266
Chip1Stop
$11.200
$7.010
$6.820
Heilind Electronics
$11.720
$9.302
$9.156
Powell Electronics
$12.270
$10.870
TTI
$12.280
$10.360
$9.480
Interstate Connecting
$12.315
$9.925
$9.638
RS Americas
$12.430
Mouser Electronics
$12.790
$11.100
Avnet
$13.324
$10.000
$8.450
PEI Genesis
$13.780
$12.680
$12.350
DigiKey
$14.710
$10.628
$9.036
Master Electronics
$9.250
$8.350
Verical
$13.384
$12.857
DF Sales Co.
$5.250
Nova Conductors
$8.138
TestEquity
$12.470
Microwave Components, LLC
$13.730
$12.160
$11.940
TME
$14.540
$10.640
TEDSS.com
$19.900
Maritex
$25.000
$12.948
VNN
Bristol Electronics
Atlantic Semiconductor
Electro Sonic
$8.780
$7.210
Semtec, LLC
Vyrian
Prism Electronics
IBS Electronics
$14.221
$12.104
Netsource Technology, Inc.
ACDS - Activité Composants Distribution Service
American Connector Supply Corp
Semi Source
MISTER SPROCKETS
Elcom Components
EMSNET
Electronic Expediters
QIE Inc.
SPM Sales
Bisco
Resion
Electronics Depot
ICP Electronique
CirComp Electronics, Inc.
Sunrise Surplus Inc.
BCID Electronics Ltd.
Mil-Aero Solutions, Inc.
Odi Ramu Company
Ampacity Inc.
$7.240
Gateway Technologies
$7.243
Continental Prestige Electronics
$7.976
Corohmni
$8.456
Singapore Electronics
$8.952
$8.325
$7.967
$7.609
Allen Electronics Distributors
$10.260
Aztec Data Supply Inc.
$10.720
Semicontronic
$15.760
$15.366
$15.287
Authorized Procurement Solutions
Argo Parts USA
Kepictronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Computer Components Inc. - USA
Low insertion loss ensures minimal signal loss, making this connector suitable for high-frequency applications.
Gold termination contact finish provides excellent conductivity and corrosion resistance, ensuring reliable performance over time.
Threaded coupling offers a secure connection, preventing accidental disconnection in demanding environments.
PTFE insulator material offers high electrical insulation properties and excellent thermal stability, enhancing overall performance.
Gold shell finish provides a durable and corrosion-resistant surface, ensuring long-term reliability.
RF SMA connector type is widely used and compatible with various RF applications, making it a versatile choice.
Beryllium copper contact material offers high conductivity and durability, ensuring stable electrical connections.
Low VSWR value indicates efficient power transfer and minimal signal reflections, ensuring high performance in RF systems.
Board mounting type allows for easy and secure installation on circuit boards, making it convenient for integration into electronic systems.
Standard 50 ohm impedance ensures compatibility with a wide range of RF devices, facilitating seamless connections in various applications.
Straight mounting style simplifies installation and ensures proper alignment for optimal signal transmission.
High maximum operating frequency of 18 GHz allows for use in demanding RF applications requiring high-speed data transmission.
Commercial grade reliability ensures consistent performance in commercial applications, making this product a cost-effective and dependable choice.
SSMA Connectors 901-144 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
901-144 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
ROHM
142-0701-871
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Maximum Operating Frequency: 18 GHz; Body or Shell Style: RECEPTACLE;
73251-0930
Molex
The Molex 73251-0930 is an RF SMA connector with a characteristic impedance of 50 ohm and gold shell finish. It uses RG-316 cable types, has a body depth of 0.45 inch, and features a brass shell material. This SSMA connector is commonly used in commercial applications requiring reliable coax connections.
73391-0070
Molex 73391-0070 RF SMA Connector has 5000000000 ohm Insulation Resistance, 0.04 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications requiring a durable SSMA Connector with POLYTETRAFLUOROETHYLENE insulator material, GOLD shell finish, and FEMALE contact gender.
901-9893-RFX
Amphenol
Amphenol's 901-9893-RFX SSMA Connector features 0.13 dB insertion loss, 50 ohm impedance, and 18 GHz operating frequency. Ideal for RF applications requiring threaded coupling, gold termination finish, and PTFE insulator material in panel mount configurations.
142-0801-811
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; JESD-609 Code: e4; Panel Mount: NO;
1051678-1
TE Connectivity
TE Connectivity's 1051678-1 SSMA Connector features 1.189" body length, 0.21 dB insertion loss, and 10000000000 ohm insulation resistance. Ideal for RF applications up to 12.4 GHz with RG 141 cable type, this threaded connector has a TFE insulator and gold shell finish.
132147-48
Amphenol 132147-48 is an RF SMA connector with a body depth of 0.31". Featuring a gold shell finish and PTFE insulator, it is ideal for commercial applications requiring reliable coaxial connections. The jack-style connector has a straight mounting style with locking option for secure installations.
1045418-1
TE Connectivity's 1045418-1 SSMA Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 18 GHz with RG405 semi-rigid cable termination. Operating range from -65°C to 125°C makes it suitable for commercial use in various industries.
225532-4
TE Connectivity's 225532-4 SSMA Connector features 0.95" body length, 5000000000 ohm insulation resistance, and 0.21 dB insertion loss. Ideal for RF applications with RG 188A, RG 174, RG 188, or RG 316 cables. Operating temperature range from -65 to 165 °C.
142-0711-301
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Maximum Operating Temperature (Cel): 165;
22_SMA-50-0-15/111_NE
Huber+suhner Ag
22_SMA-50-0-15/111_NE by Huber+suhner Ag is a SSMA Connector with gold termination, threaded coupling, and beryllium copper shell. It operates from -65 to 165°C, has 50 ohm impedance, and supports up to 18 GHz frequency. Ideal for commercial applications requiring reliable RF connections in harsh environments.
1051690-1
TE Connectivity's 1051690-1 is an RF SMA connector with a threaded coupling type and TFE fluorocarbon insulator material. It has a max operating temperature of 165°C and can handle frequencies up to 12.4 GHz. This connector is commonly used in applications requiring a 50 ohm characteristic impedance, such as cable mounting for SF 142B cables.
R125.464.271
Radiall S A
Radiall S A's R125.464.271 SSMA Connector features 0.3 dB insertion loss, 1.1 VSWR, and 50 ohm impedance for up to 18 GHz applications. With a gold over nickel finish, this threaded RF SMA connector is panel mountable and ideal for high-frequency signal transmission in various industries.
73251-0112
The Molex 73251-0112 is an RF SMA connector with POLYTETRAFLUOROETHYLENE insulator, STAINLESS STEEL shell, and RG-55 cable type. It is a male plug connector terminated by crimping for commercial applications requiring reliable coaxial connections.
MP-19-49-5-TGG
Multicomp Pro
RF SMA CONNECTOR;
132113RP
Amphenol's 132113RP is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a characteristic impedance of 50 ohm and is commonly used with RG-58C/U cables for commercial applications.
2052-3123-00
TE Connectivity 2052-3123-00 is an RF SMA connector with gold finish, 50 ohm impedance, and 18 GHz operating frequency. It is used in commercial applications for high-frequency signal transmission due to its low insertion loss of 0.17 dB and high insulation resistance of 5 Gohm.
1340153
Phoenix Contact
2081897-2
TE Connectivity's 2081897-2 is an SSMA Connector with 0.374" body diameter, 5000000000 ohm insulation resistance, and 0.424 dB insertion loss. Ideal for applications requiring a durable connector with a characteristic impedance of 50 ohm, operating up to 18 GHz.
R127.800.001
R127.800.001 by Radiall S A is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.19 dB, suitable for applications up to 40 GHz. Featuring gold over nickel termination contact finish, it offers high durability with 500 cycles and operates in temperatures ranging from -65 to 165 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-144-8RFX
Amphenol 901-144-8RFX is an RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and brass shell for durability in high-temp environments.
901-143-6RFX
Amphenol 901-143-6RFX is an SSMA connector with gold termination, PTFE insulator, and 50 ohm impedance. It operates b/w -65 to 165 °C, has 0.13 dB insertion loss, and can handle up to 18 GHz frequency. Ideal for RF applications requiring high durability and low VSWR.
901-10510-2
Amphenol's 901-10510-2 is an RF SMA connector with a threaded coupling type. It has a max operating frequency of 26.5 GHz and can withstand temperatures ranging from -65 to 165°C. This connector, suitable for board mounting, is commonly used in applications requiring high insulation resistance and low contact resistance.
901-155-16
Amphenol 901-155-16 is an RF SMA connector with a dielectric voltage of 1400VAC, operating from -65 to 165°C. It has a gold finish, brass shell, and PTFE insulator suitable for RG-174/U cables. With a durability of 500 cycles, it's ideal for commercial applications requiring a 50 ohm impedance connection.
901-10025-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .25 dB; Termination Contact Finish: GOLD; MIL Conformity: NO;
901-10385
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: GOLD; Shell Material: BRASS; Voltage Standing Wave Ratio: 1.3;
901-10423
901-10512-1
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
901-10029-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 901-10029-RFX; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG;
901-10512-2
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
901-144-3
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Panel Mount: NO;
901-10512-3
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
901-144-4
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: NOT SPECIFIED;
901-10011
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 12.4 GHz; DIN Conformance: NO; Mounting Type: CABLE;
901-10309
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Shell Finish: GOLD; Contact Style: COAX; Mounting Option-1: LOCKING;
901-10172
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 700VAC; Body Width: .411 inch; Insulator Material: POLYTETRAFLUOROETHYLENE; Insulator Color: NATURAL;
901-10387
RF SMA CONNECTOR; Reliability: COMMERCIAL; Termination Type: SURFACE MOUNT; Voltage Standing Wave Ratio: 1.16; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
901-101-15
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Cable Types: RG-400/U;
901-1GA200000AE
901-143-4
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Contact Finish: GOLD; Body Depth: .594 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved