Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 901-9511-2 is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1400VAC dielectric voltage. Ideal for RG-58 cables in commercial applications up to 12.4 GHz frequency due to its gold finish, PTFE insulator, and stainless steel shell.
Median Price
$30.852
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$21.950
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$29.380
$22.953
Interstate Connecting
$24.145
RS Americas
$32.920
Mouser Electronics
$37.360
Nova Conductors
$24.036
Vyrian
VNN
Mil-Aero Solutions, Inc.
Connector Distribution Corp
Right Parts Inc.
Corohmni
$1.185
Aztec Data Supply Inc.
$7.930
Aranea Global
$23.555
$22.613
Gateway Technologies
$21.391
Singapore Electronics
$26.439
$24.588
$23.530
$22.473
Allen Electronics Distributors
$29.120
Andel Nordic
$29.410
$20.589
Ampacity Inc.
$54.350
Glotronic Ltd.
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
High insulation resistance ensures minimal signal loss and interference, making it suitable for high-frequency applications.
Low insertion loss results in efficient signal transmission with minimal power loss.
High dielectric voltage withstand capability ensures safe operation in high voltage environments.
Gold termination contact finish ensures superior conductivity and corrosion resistance for long-term reliability.
Threaded coupling type provides secure and stable connections, ideal for applications where vibration or shock is present.
Polytetrafluoroethylene insulator material offers excellent electrical properties and chemical resistance for reliable performance.
High maximum operating temperature allows for use in a wide range of environments without compromising performance.
Low minimum operating temperature ensures the connector can operate effectively in extreme cold conditions.
Gold shell finish provides enhanced durability and ensures long-lasting performance.
RF SMA connector type is widely used in telecommunications and RF applications, offering compatibility and reliability.
Withstands up to 500 mating cycles, ensuring long-term durability and reliability in demanding environments.
50 ohm characteristic impedance is standard in RF applications, providing optimal signal transfer and matching.
Stainless steel shell material offers durability, corrosion resistance, and mechanical strength for reliable performance.
Compatible with RG-58 cable types, providing versatility and easy integration into existing systems.
Crimp solder termination type ensures secure and reliable connections for optimal signal transmission.
Male contact gender is commonly used in RF applications, offering compatibility and reliable connectivity.
Low contact resistance ensures efficient signal transmission and minimal power loss.
Plug body or shell style allows for easy connection and disconnection, offering convenience in installation and maintenance.
Straight mounting style provides a simple and direct connection, suitable for applications with limited space or routing requirements.
Coaxial contact style ensures optimal signal transfer and impedance matching for reliable performance.
Locking mounting option provides secure and stable connections, ideal for applications where vibration or movement is present.
Supports high-frequency operation up to 12.4 GHz, making it suitable for high-speed data transmission and RF applications.
Commercial-grade reliability ensures consistent performance in various commercial and industrial applications.
SSMA Connectors 901-9511-2 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
901-9511-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
EU2B-YS3103F
Idec
ROTARY SWITCH;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Diotec Semiconductor Ag
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
Meritek Electronics
142-0694-101
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: VSWR AT 12.4 GHZ: 1.34, INSERTION LOSS MAX AT 10 GHZ; JESD-609 Code: e4; Panel Mount: NO;
1051810-1
TE Connectivity
TE Connectivity's 1051810-1 SSMA Connector features a body length of 1.25", insertion loss of 0.06 dB, and insulation resistance of 5G ohm. Ideal for RF applications with threaded coupling, PTFE insulator, and stainless steel shell material. Operating temperature range from -65 to 165 °C, suitable for cables like RG 188A and RG 316 at frequencies up to 12.4 GHz.
132134
Amphenol
Amphenol 132134 is an RF SMA connector with threaded coupling, gold over nickel finish, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and female contact gender. Ideal for board mounting applications requiring a straight jack configuration.
142-0801-811
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Body or Shell Style: RECEPTACLE; Termination Contact Finish: GOLD (30);
73251-1350
Molex
Molex 73251-1350 is an RF SMA connector with 50 ohm impedance, 0.17 dB insertion loss, and 1.07 VSWR. Ideal for board and panel mounting in applications requiring a durable female jack connector with surface mount termination up to 18 GHz frequency range.
CON-SMA-EDGE-SRP
Rf Solutions
CON-SMA-EDGE-SRP by Rf Solutions is a 50 ohm RF SMA connector with gold shell finish. Featuring a right-angle mounting style, it operates up to 18 GHz frequency and is ideal for board-mounted applications requiring threaded coupling and female contact gender.
142-0761-831
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Coupling Type: THREADED;
901-10512-1
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1052962-1
TE Connectivity's 1052962-1 SSMA Connector has a body length of 0.375", insertion loss of 0.07 dB, and insulation resistance of 5000000000 ohm. Ideal for RF applications, this threaded connector features a max operating frequency of 12.4 GHz and is designed with a characteristic impedance of 50 ohm.
R125464271
Radiall S A
The Radiall S A R125464271 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.296 dB and high VSWR of 1.16, suitable for applications up to 18 GHz. This panel mount receptacle with PTFE insulator is ideal for high-frequency communication systems.
M39012/55-4502
Amphenol's M39012/55-4502 SSMA Connector features 0.11 dB Insertion Loss, MIL Conformity, and 50 ohm Impedance. Ideal for RF applications up to 12.4 GHz, this threaded connector with PTFE insulator is commonly used in cable installations for reliable signal transmission.
132139
Amphenol 132139 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for panel mounting applications, it features a solder termination and female contact gender in a jack body style.
SMA-J-P-H-ST-TH1
Samtec
SMA-J-P-H-ST-TH1 by Samtec is a RF SMA connector with gold termination, suitable for commercial applications. With a max operating frequency of 18 GHz, it offers reliable performance. This straight-mount connector has a body size of 0.276" x 0.276" x 0.376", making it ideal for board mounting in high-frequency systems.
60312242114510
Wuerth Elektronik & Kg
M39012/56-3107
Kings Electronics
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: CABLE;
142-9701-201
Bel Fuse
Bel Fuse's 142-9701-201 SSMA Connector features a body diameter of 0.312", insulation resistance of 5G ohm, and dielectric voltage of 1400VAC. Ideal for RF applications, this connector has a durability of 500 cycles, operates b/w -65 to 165°C, and offers a characteristic impedance of 50 ohm at up to 18 GHz frequencies.
11_SMA-50-3-65/119_NH
Huber+suhner Ag
11_SMA-50-3-65/119_NH by Huber+suhner Ag is a RF SMA connector with gold/nickel finish, suitable for commercial applications up to 18 GHz. Featuring threaded coupling, it has a body depth of 0.445", operates b/w -65°C to 165°C, and offers a characteristic impedance of 50 ohm. Ideal for cable mounting, this male plug connector ensures reliable performance in various industries.
132421
The Amphenol 132421 is an RF SMA connector with a max operating frequency of 6 GHz. Featuring a gold shell finish and polytetrafluoroethylene insulator material, it is ideal for commercial applications requiring reliable board and panel mounting. With a straight mounting style and solder termination type, this SSMA connector offers secure connections in high-frequency environments.
1052030-1
TE Connectivity's 1052030-1 is an RF SMA connector with threaded coupling, TFE insulator, and gold shell finish. With 50 ohm impedance, it operates from -65 to 165°C and handles RG 196 cables. Ideal for commercial applications up to 12.4 GHz requiring high insulation resistance and low insertion loss.
M39012/79B-3001
Midwest Microwave
Midwest Microwave's M39012/79B-3001 SSMA connector features threaded coupling, 50 ohm impedance, and solder termination. Ideal for RF applications, this male plug connector is MIL compliant and designed for cable mounting in straight configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-9875
Amphenol 901-9875 is an RF SMA connector with threaded coupling, gold termination, and PTFE insulator. It offers low insertion loss of 0.25 dB and VSWR of 1.51 up to 18 GHz. Ideal for panel and cable mounting applications requiring a 50 ohm impedance connection.
901-9511-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Characteristic Impedance: 50 ohm; Insertion Loss: .11 dB;
901-9601-3
Amphenol's 901-9601-3 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.11 dB and can operate at frequencies up to 12.4 GHz. This connector is commonly used in cable applications requiring a 50 ohm characteristic impedance.
901-9511-12SF
Amphenol 901-9511-12SF SSMA Connector features 0.11 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz, with POLYTETRAFLUOROETHYLENE insulator material and 50 ohm impedance. Suitable for cable mounting with CRIMP SOLDER termination type.
901-9210-2
Amphenol 901-9210-2 is an RF SMA connector with 0.13 dB insertion loss, 1.14 VSWR, and 18 GHz max operating frequency. It features gold termination finish, PTFE insulator, and stainless steel shell for RG-405 cable applications in commercial reliability settings.
901-9877-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm;
901-9511-3SF
Amphenol 901-9511-3SF is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.51 VSWR. It is used in commercial applications at frequencies up to 12.4 GHz for reliable signal transmission in high-temp environments.
901-9876-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; MIL Conformity: NO; Mounting Style: STRAIGHT;
901-9511-1
Amphenol 901-9511-1 SSMA Connector features 0.11 dB insertion loss, GOLD termination, and threaded coupling. Ideal for RF applications up to 12.4 GHz with 50 ohm impedance. Suitable for cable mounting with crimp solder termination and male contact gender.
901-9723
Amphenol 901-9723 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 26.5 GHz with 50 ohm impedance. Suitable for commercial use with durability of 100 cycles.
901-9531-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG; Mounting Type: CABLE;
901-9511-3SFC
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Termination Type: CRIMP; Characteristic Impedance: 50 ohm;
901-9531-3SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; JESD-609 Code: e4;
901-9531-3
Amphenol 901-9531-3 is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 12.4 GHz operating frequency. Ideal for RG-316 cables in commercial applications due to its durable stainless steel shell, gold finish, and PTFE insulator material.
901-9602-3
Amphenol's 901-9602-3 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 12.4 GHz and is commonly used in cable applications for its low insertion loss (0.11 dB) and gold termination contact finish.
901-9531-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: COAX; No. of Ports: 1;
901-9531-12SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Material: NOT SPECIFIED;
901-9602-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP SOLDER; Body or Shell Style: JACK; Mounting Type: CABLE;
901-9184-CCSF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
901-9511-3
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Cable Types: RG-174/U, RG-179B/U, RG-187A/U, RG-188A/U; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved