Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 901-9875 is an RF SMA connector with threaded coupling, gold termination, and PTFE insulator. It offers low insertion loss of 0.25 dB and VSWR of 1.51 up to 18 GHz. Ideal for panel and cable mounting applications requiring a 50 ohm impedance connection.
Median Price
$13.370
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Arrow
1+ parts
$10.494
100+ parts
$6.837
1k+ parts
-
10k+ parts
Farnell
$17.445
$12.249
$10.644
TTI
$17.940
$10.610
$8.100
Element14
$22.310
$16.090
$14.980
Newark
$23.360
$17.400
$16.560
Master Electronics
$10.350
$7.900
Verical
$12.844
Powell Electronics
$11.230
$8.510
Chip1Stop
$9.400
Nova Conductors
$11.190
TME
$19.210
$12.180
Vyrian
VNN
IBS Electronics
$14.137
$11.052
Electro Sonic
$11.030
$8.960
ACDS - Activité Composants Distribution Service
Quittner & Schimek s.r.o.
Sunrise Surplus Inc.
A2Z Electronics, Inc.
Electronic Supply
EMSNET
Corohmni
$5.366
Aztec Data Supply Inc.
$7.766
Semicontronic
$7.990
$7.790
$7.750
Ampacity Inc.
Continental Prestige Electronics
$9.688
$9.494
Gateway Technologies
$10.612
$9.444
Aranea Global
$10.966
$10.527
Advanced Electronics
$11.115
$10.559
Singapore Electronics
$11.673
$10.855
$10.388
$9.922
Kepictronics
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
This feature allows for easy installation and secure mounting, making it a convenient choice for various applications.
With low insertion loss, this connector ensures minimal signal degradation, making it ideal for high-frequency applications.
The gold termination contact finish provides excellent conductivity and corrosion resistance, resulting in reliable performance.
The threaded coupling type ensures a secure connection, making this connector suitable for harsh environments or high vibration applications.
The use of PTFE insulator material offers excellent electrical insulation properties and high temperature resistance, enhancing the overall reliability of the connector.
This connector type is widely used in RF applications due to its versatility and compatibility with various devices and systems.
The gold mating contact finish ensures superior conductivity and durability, making this connector a reliable choice for long-term use.
With a low VSWR, this connector provides efficient power transmission and minimizes signal reflections, ensuring optimal signal integrity.
The ability to mount this connector on both cables and panels offers flexibility in installation, making it suitable for a range of setups.
The 50-ohm characteristic impedance matches standard RF systems, ensuring proper signal transfer and reducing signal loss.
The crimp termination type allows for easy and secure connections, making it a convenient choice for assembly and maintenance.
The female contact gender is common in RF applications and offers compatibility with various mating connectors, making this product versatile.
The jack body style is commonly used for connecting components or test equipment, making this connector suitable for a wide range of applications.
The straight mounting style simplifies installation and ensures proper alignment, making this connector easy to integrate into systems.
With a high maximum operating frequency, this connector is suitable for demanding RF applications that require high-speed data transmission.
SSMA Connectors 901-9875 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
901-9875 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Sangdest Microelectronics (Nanjing)
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1-1478912-0
TE Connectivity
TE Connectivity 1-1478912-0 is an RF SMA connector with threaded coupling, suitable for RG-174A/U, RG-188A/U, and RG-316/U cables. It features a 50 ohm characteristic impedance, stainless steel shell material with gold finish, and a max operating frequency of 26 GHz. Ideal for applications requiring high-frequency signal transmission in harsh environments.
R125.075.000
Radiall S A
R125.075.000 by Radiall S A is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.21 dB, suitable for applications requiring high durability and reliability up to 12.4 GHz frequency range. Featuring gold termination contact finish, threaded coupling type, and polytetrafluoroethylene insulator material, it offers a max operating temperature of 165°C and min of -65°C for use in commercial settings with RG-141 cable types.
EZ-240-SM-X
Amphenol
The Amphenol EZ-240-SM-X is a threaded RF SMA connector with 50 ohm impedance, 0.245 dB insertion loss, and 1.3 VSWR. Ideal for LMR240 cables, it operates b/w -40 to 125°C and can withstand up to 6 GHz frequency, making it suitable for high-frequency RF applications.
SF2921-61345-1S
Sv Microwave
RF SMA CONNECTOR;
1052978-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: CAPTIVE CONTACT; MIL Conformity: NO; Filter Feature: NO;
142-0694-101
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Voltage Standing Wave Ratio: 1.87; Contact Material: NOT SPECIFIED;
110-900-0631N
Winchester Interconnect
RF SMA CONNECTOR; Manufacturer Series: 110-900-0631N;
R125.680.000
Radiall S A's R125.680.000 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.3 dB Insertion Loss, and 1414VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz, this gold-finished connector has a characteristic impedance of 50 ohm and operates b/w -65°C to 165°C.
CONSMA001-SMD-G
Linx Technologies
The Linx Technologies CONSMA001-SMD-G is an RF SMA connector with gold finish, suitable for surface mount termination. Featuring a body length of 0.276", diameter of 0.212", and insulator made of PTFE, it is commonly used in applications requiring high-frequency coaxial connections.
1052944-1
TE Connectivity's 1052944-1 SSMA Connector features threaded coupling, PTFE insulator, and female contact gender. With a max operating frequency of 18 GHz, it is ideal for RF applications requiring panel mount connectors with straight mounting style.
CONREVSMA001
CONREVSMA001 by Linx Technologies is a RF SMA connector with 50 ohm impedance, 0.04 dB insertion loss, and 1.2 VSWR. Ideal for applications requiring high durability, it features gold termination finish, PTFE insulator material, and can operate b/w -65 to 165 °C.
1051660-1
TE Connectivity's 1051660-1 SSMA Connector features TFE insulator, gold shell finish, and stainless steel shell material. With a max operating frequency of 18 GHz, it is ideal for RF applications requiring a threaded coupling type and crimp termination on cables like RG 55, RG 223, RG 400, and RG 142.
2903-6001
The SV Microwave SSMA Connector 2903-6001 features a dielectric voltage of 1050VAC, insulation resistance of 5000000000 ohm, and operates up to 12.4 GHz. Ideal for RF applications, it has a MIL-G-45204 reliability rating and can withstand temperatures from -65 to 165 °C.
142-0761-891
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.5; Filter Feature: NO; IEC Conformity: NO;
5350-3
Carlisle Interconnect Technologies
The Carlisle Interconnect Technologies 5350-3 is an RF SMA CONNECTOR with MALE contact gender and COAX style. It features a 0.05" terminal length, STRAIGHT mounting style, and LOCKING option. Ideal for commercial applications requiring reliable SSMA connectors.
R125414000
Radiall S A's R125414000 SSMA Connector features 0.296 dB Insertion Loss, 1.16 VSWR, and 50 ohm Impedance. With gold termination finish, it is ideal for RF applications up to 18 GHz requiring threaded coupling and panel mounting in straight configurations.
MP-19-02V-11-TGG
SPC TECHNOLOGY/ MULTICOMP
2081005-1
TE Connectivity's 2081005-1 SSMA Connector features a 0.646" body length and 0.381" depth, with a max operating frequency of 11 GHz. Ideal for RF applications, this right-angle panel-mount connector has a characteristic impedance of 50 ohm and insulator material made of PTFE.
132255-12
Amphenol 132255-12 is a SSMA connector with 50 ohm impedance, gold finish, and 18 GHz frequency. It is used in RF applications requiring high dielectric voltage withstand capability up to 1400VAC. This straight jack connector has a brass shell and PTFE insulator for surface mount board termination.
142-0801-811
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-9511-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Characteristic Impedance: 50 ohm; Insertion Loss: .11 dB;
901-9601-3
Amphenol's 901-9601-3 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.11 dB and can operate at frequencies up to 12.4 GHz. This connector is commonly used in cable applications requiring a 50 ohm characteristic impedance.
901-9511-12SF
Amphenol 901-9511-12SF SSMA Connector features 0.11 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz, with POLYTETRAFLUOROETHYLENE insulator material and 50 ohm impedance. Suitable for cable mounting with CRIMP SOLDER termination type.
901-9210-2
Amphenol 901-9210-2 is an RF SMA connector with 0.13 dB insertion loss, 1.14 VSWR, and 18 GHz max operating frequency. It features gold termination finish, PTFE insulator, and stainless steel shell for RG-405 cable applications in commercial reliability settings.
901-9877-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm;
901-9511-3SF
Amphenol 901-9511-3SF is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.51 VSWR. It is used in commercial applications at frequencies up to 12.4 GHz for reliable signal transmission in high-temp environments.
901-9876-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; MIL Conformity: NO; Mounting Style: STRAIGHT;
901-9511-1
Amphenol 901-9511-1 SSMA Connector features 0.11 dB insertion loss, GOLD termination, and threaded coupling. Ideal for RF applications up to 12.4 GHz with 50 ohm impedance. Suitable for cable mounting with crimp solder termination and male contact gender.
901-9723
Amphenol 901-9723 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 26.5 GHz with 50 ohm impedance. Suitable for commercial use with durability of 100 cycles.
901-9531-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG; Mounting Type: CABLE;
901-9511-3SFC
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Termination Type: CRIMP; Characteristic Impedance: 50 ohm;
901-9531-3SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; JESD-609 Code: e4;
901-9511-2
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulator Material: POLYTETRAFLUOROETHYLENE;
901-9531-3
Amphenol 901-9531-3 is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 12.4 GHz operating frequency. Ideal for RG-316 cables in commercial applications due to its durable stainless steel shell, gold finish, and PTFE insulator material.
901-9602-3
Amphenol's 901-9602-3 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 12.4 GHz and is commonly used in cable applications for its low insertion loss (0.11 dB) and gold termination contact finish.
901-9531-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: COAX; No. of Ports: 1;
901-9531-12SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Material: NOT SPECIFIED;
901-9602-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP SOLDER; Body or Shell Style: JACK; Mounting Type: CABLE;
901-9184-CCSF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
901-9841
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Coupling Type: THREADED; Body or Shell Style: RECEPTACLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved