Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 901-9501-3 is an RF SMA connector with 0.11 dB insertion loss, GOLD termination contact finish, and threaded coupling type. Ideal for applications requiring a 50 ohm characteristic impedance, such as cable mounting in straight plug configurations up to 12.4 GHz frequency.
Median Price
$32.506
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Newark
1+ parts
$18.870
100+ parts
1k+ parts
10k+ parts
-
DigiKey
$32.010
$25.889
$24.631
Mouser Electronics
$33.440
$27.910
$25.630
TTI
$35.680
$28.290
$25.760
Master Electronics
$45.080
$26.530
$25.420
Verical
Powell Electronics
$23.180
$17.570
Freelance Electronics
$16.224
$17.035
$16.062
Electro Sonic
$32.610
$21.620
$19.510
IBS Electronics
$63.225
$37.208
$35.652
Vyrian
VNN
Nova Conductors
American Connector Supply Corp
Bristol Electronics
Gateway Technologies
$3.000
$2.669
Singapore Electronics
$3.300
$3.068
$2.936
$2.804
Ampacity Inc.
$51.880
Argo Parts USA
Continental Prestige Electronics
Netroflash
Perfect Parts
4 Star Electronics, Inc. (Excess)
Low insertion loss ensures minimal signal loss during transmission, making this connector ideal for high frequency applications.
Gold finish on the termination contact provides excellent conductivity and corrosion resistance, ensuring reliable and durable connections.
Threaded coupling provides a secure and stable connection, suitable for environments where vibrations or movements may occur.
PTFE insulator offers high dielectric strength and low loss, resulting in improved signal integrity and reliability.
RF SMA connector is a commonly used type, known for its versatility and compatibility with a wide range of RF applications.
Designed for easy installation on cables, allowing for quick and convenient setup in various systems.
Matches the impedance of typical RF systems, ensuring efficient power transfer and minimal signal reflection.
Solder termination provides a strong and permanent connection, suitable for applications requiring high reliability.
Male gender connector is commonly used for plugs, ensuring compatibility with a wide range of existing female connectors.
Plug style body allows for easy and quick connections, making it suitable for applications where frequent connections are needed.
Straight mounting style provides a direct and simple connection setup, suitable for setups where space is limited.
Capable of handling high frequency signals up to 12.4 GHz, making it suitable for demanding RF applications.
SSMA Connectors 901-9501-3 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
901-9501-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
5251
Carlisle Interconnect Technologies
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Depth: .31 inch; No. of Ports: 1; Manufacturer Series: 5251;
142-0203-101
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Coupling Type: THREADED; Termination Type: CLAMP;
1052897-1
TE Connectivity
TE Connectivity's 1052897-1 is an RF SMA connector with threaded coupling, TFE insulator, and gold shell finish. With a 50 ohm impedance, it operates from -65 to 105°C and handles up to 18 GHz frequencies. Ideal for commercial applications requiring reliable panel-mounted connectors with low insertion loss and high insulation resistance.
1052634-1
1052634-1 by TE Connectivity is a SSMA Connector with 0.375" body length, 5000000000 ohm insulation resistance, and 0.17 dB insertion loss. Ideal for RF applications up to 18 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and stainless steel shell.
132236
Amphenol
Amphenol 132236 is an RF SMA connector with threaded coupling, gold termination contact finish, and 0.14 dB insertion loss. Ideal for applications requiring a 50 ohm characteristic impedance, it operates at frequencies up to 12.4 GHz and features a female gendered jack body style suitable for crimp solder terminations on cables.
R125176001
Radiall S A
R125176001 by Radiall S A is an RF SMA connector with 50 ohm impedance and 0.25 dB insertion loss. Featuring a threaded coupling type, it has a max operating frequency of 12.4 GHz. Ideal for applications requiring high-frequency signal transmission in aerospace and telecommunications industries.
PSF-S02-001
Gigalane
PSF-S02-001 by Gigalane is an RF SMA connector with threaded coupling, gold-plated beryllium copper contacts, and a 50 ohm impedance. It is panel mountable and suitable for applications requiring high-frequency operation up to 26.5 GHz, such as in telecommunications and aerospace industries.
60311042114502
Wuerth Elektronik & Kg
RF SMA CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
CONREVSMA002-L
Linx Technologies
CONREVSMA002-L by Linx Technologies is an RF SMA connector with gold-plated brass contacts and a threaded coupling type. With 50 ohm impedance, it's ideal for board mounting applications requiring a right-angle female connector termination.
142-0711-301
Bel Fuse
Bel Fuse's 142-0711-301 is an RF SMA connector with a body length of 0.25", width of 0.325", and depth of 0.525". It has a max operating frequency of 18 GHz and is commonly used in commercial applications.
142-0711-201
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Ports: 1;
SF8018-6007
Sv Microwave
RF SMA CONNECTOR;
16_SMA-50-2-141/133_NH
Huber+suhner Ag
16_SMA-50-2-141/133_NH by Huber+suhner Ag is a threaded RF SMA connector with gold-over-nickel mating contact finish. It has a characteristic impedance of 50 ohm, operates b/w -65 to 165 °C, and can handle frequencies up to 18 GHz. Ideal for commercial applications requiring durable, high-frequency connections.
132284RP
The Amphenol 132284RP is an RF SMA connector with a threaded coupling type and gold shell finish. It features a body depth of 0.414" and insulator material made of PTFE, suitable for RG-174/U cable termination in commercial applications. The connector has a brass shell, crimp termination, and male contact gender for reliable coaxial connections.
901-10512-3
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1050776-1
TE Connectivity's 1050776-1 SSMA Connector features a body length of 0.44", insertion loss of 0.13 dB, and insulation resistance of 5G ohm. Ideal for RF applications up to 18 GHz, this threaded connector with gold finish is designed for RG402 semi-rigid cables in commercial settings.
73251-2121
Molex
The Molex 73251-2121 is a SSMA connector with a body depth of 0.45 inch and a gold shell finish. It has 1 port and is designed for RF SMA connections. Its surface mount termination type makes it suitable for commercial applications.
R125153002
The Radiall S A R125153002 SSMA Connector features low 0.08 dB insertion loss, gold termination contact finish, and threaded coupling type. Ideal for RF applications up to 18 GHz with 50 ohm impedance, solder termination, and male contact gender. Suitable for cable mounting in right angle configuration.
M39012/55-3030
M39012/55-3030 by Sv Microwave is an SSMA connector with threaded coupling, suitable for RF applications. It has a characteristic impedance of 50 ohm, solder termination, and male contact gender. This plug-style connector mounts directly on cables in straight orientation, conforming to MIL standards.
TC-240-NMH-D
Times Microwave Systems
TC-240-NMH-D by Times Microwave Systems is an RF N CONNECTOR with 50 ohm impedance, 1.25 VSWR, and 18 GHz frequency range. It features a PTFE insulator, -40 to 165 °C operating temp, and 1400VAC dielectric strength. Ideal for high-frequency applications requiring reliable signal transmission in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-9875
Amphenol 901-9875 is an RF SMA connector with threaded coupling, gold termination, and PTFE insulator. It offers low insertion loss of 0.25 dB and VSWR of 1.51 up to 18 GHz. Ideal for panel and cable mounting applications requiring a 50 ohm impedance connection.
901-9511-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Characteristic Impedance: 50 ohm; Insertion Loss: .11 dB;
901-9601-3
Amphenol's 901-9601-3 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.11 dB and can operate at frequencies up to 12.4 GHz. This connector is commonly used in cable applications requiring a 50 ohm characteristic impedance.
901-9511-12SF
Amphenol 901-9511-12SF SSMA Connector features 0.11 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz, with POLYTETRAFLUOROETHYLENE insulator material and 50 ohm impedance. Suitable for cable mounting with CRIMP SOLDER termination type.
901-9210-2
Amphenol 901-9210-2 is an RF SMA connector with 0.13 dB insertion loss, 1.14 VSWR, and 18 GHz max operating frequency. It features gold termination finish, PTFE insulator, and stainless steel shell for RG-405 cable applications in commercial reliability settings.
901-9877-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm;
901-9511-3SF
Amphenol 901-9511-3SF is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.51 VSWR. It is used in commercial applications at frequencies up to 12.4 GHz for reliable signal transmission in high-temp environments.
901-9876-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; MIL Conformity: NO; Mounting Style: STRAIGHT;
901-9511-1
Amphenol 901-9511-1 SSMA Connector features 0.11 dB insertion loss, GOLD termination, and threaded coupling. Ideal for RF applications up to 12.4 GHz with 50 ohm impedance. Suitable for cable mounting with crimp solder termination and male contact gender.
901-9723
Amphenol 901-9723 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 26.5 GHz with 50 ohm impedance. Suitable for commercial use with durability of 100 cycles.
901-9531-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG; Mounting Type: CABLE;
901-9511-3SFC
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Termination Type: CRIMP; Characteristic Impedance: 50 ohm;
901-9531-3SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; JESD-609 Code: e4;
901-9511-2
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulator Material: POLYTETRAFLUOROETHYLENE;
901-9531-3
Amphenol 901-9531-3 is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 12.4 GHz operating frequency. Ideal for RG-316 cables in commercial applications due to its durable stainless steel shell, gold finish, and PTFE insulator material.
901-9602-3
Amphenol's 901-9602-3 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 12.4 GHz and is commonly used in cable applications for its low insertion loss (0.11 dB) and gold termination contact finish.
901-9531-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: COAX; No. of Ports: 1;
901-9531-12SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Material: NOT SPECIFIED;
901-9602-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP SOLDER; Body or Shell Style: JACK; Mounting Type: CABLE;
901-9184-CCSF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved