Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73251-1352 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz with FEMALE contact gender, POLYTETRAFLUOROETHYLENE insulator material, and NICKEL shell finish.
Median Price
$4.040
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Farnell
1+ parts
$2.970
100+ parts
$2.070
1k+ parts
-
10k+ parts
Interstate Connecting
$2.992
DigiKey
$4.220
Mouser Electronics
$4.340
$3.340
$2.850
$2.660
TTI
$5.070
$3.550
$2.940
$2.740
Element14
$5.740
$4.350
$3.700
Newark
$5.770
$4.770
$4.270
Powell Electronics
$3.110
$2.520
Chip1Stop
NEP Electronics
Verical
$3.812
$3.440
TTI Europe
$3.859
$3.272
Nova Conductors
$2.421
Digiode
$2.842
TME
$5.840
$4.380
Vyrian
IBS Electronics
$3.226
$3.001
$2.398
Bristol Electronics
Prism Electronics
ComSIT Distribution GmbH
Semtec, LLC
Rotakorn
VNN
Semi Source
Argo Parts USA
$2.385
Netroflash
$2.300
$2.252
Semicontronic
$2.540
$2.476
$2.464
Corphita
$2.693
Continental Prestige Electronics
$4.540
$2.890
$2.670
Andel Nordic
$4.917
$4.720
Aztec Data Supply Inc.
$10.701
Kepictronics
Assy Fe
Robosynatics
$10.239
$9.481
Lucentia Tech
Speed Components Ltd (Excess)
Perfect Parts
High insulation resistance ensures reliable performance and helps prevent signal loss.
Low insertion loss ensures minimal signal attenuation and maintains signal integrity.
High dielectric voltage withstand capability ensures safety and reliability in high voltage applications.
Compact body depth allows for space-saving installations in tight spaces.
Using PTFE as insulator material provides excellent electrical insulation and high temperature resistance.
High operating temperature range allows for use in a variety of environments without degradation.
Low minimum operating temperature ensures reliable performance even in extreme cold conditions.
Nickel shell finish provides corrosion resistance and durability for long-lasting performance.
RF SMA connectors are widely used in telecommunications and RF applications for their high performance and reliability.
Low VSWR indicates minimal signal reflection and efficient power transfer.
Withstands up to 500 mating cycles for reliable and long-lasting connections.
Board mounting allows for secure and stable connections in electronic circuits.
50 ohm impedance matches common RF equipment for optimal signal transfer.
Brass shell material provides durability and conductivity for high-performance connection.
Surface mount termination allows for easy and secure installation on circuit boards.
Female contact gender is compatible with standard male connectors for easy connectivity.
Low contact resistance ensures efficient power transfer and minimal signal loss.
Jack body style is commonly used for RF connections in various applications.
Straight mounting style allows for space-saving installation and easy connections.
Coaxial contact style provides reliable signal transmission in RF applications.
Locking mounting option ensures secure and stable connections in high-vibration environments.
Supports high-frequency applications up to 18 GHz for versatile use in RF systems.
Commercial-grade reliability ensures consistent performance in various commercial applications.
SSMA Connectors 73251-1352 attributes and parameters. Explore more SSMA Connectors devices from Molex
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insertion Loss:
Insulation Resistance:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73251-1352 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
ROHM
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
141-0701-402
Bel Fuse
Bel Fuse's 141-0701-402 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications up to 18 GHz with a durability of 500 Cycles.
142-0701-631
Bel Fuse's 142-0701-631 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications with a max frequency of 18 GHz, it offers durability with 500 Cycles and a Female Contact Gender.
R125.464.270W
Radiall S A
R125.464.270W by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.07 dB insertion loss, and 18 GHz operating frequency. Ideal for panel mounting in commercial applications, it offers high durability with a gold shell finish and can withstand temperatures from -65 to 165 °C.
142-0701-411
Bel Fuse's 142-0701-411 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications up to 18 GHz, this connector offers durability with 500 Cycles and a Female Contact Gender.
2081005-1
TE Connectivity
TE Connectivity's 2081005-1 SSMA Connector features a 0.646" body length and 0.381" depth, with a max operating frequency of 11 GHz. Ideal for RF applications, this right-angle panel-mount connector has a characteristic impedance of 50 ohm and insulator material made of PTFE.
901-10512-2
Amphenol
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
M39012/60-3001
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Panel Mount: YES; Mounting Style: STRAIGHT;
901-9867-RFX
Amphenol 901-9867-RFX is an RF SMA connector with threaded coupling, gold termination, and PTFE insulator. It offers low insertion loss of 0.25 dB and VSWR of 1.25 up to 18 GHz. Ideal for applications requiring a 50 ohm impedance, such as cable mounting in high-frequency environments.
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
142-4701-501
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Panel Mount: YES; Mounting Style: RIGHT ANGLE;
73391-0080
Molex
The Molex 73391-0080 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
R124172123W
R124172123W by Radiall S A is an RF SMA connector with gold termination, threaded coupling, and PTFE insulator. It has a VSWR of 1.52, operates up to 12.4 GHz, and features a 50 ohm impedance. Ideal for applications requiring high-frequency signal transmission in cable assemblies with right-angle mounting needs.
MP-19-49-5-TGG
Multicomp Pro
RF SMA CONNECTOR;
1340153
Phoenix Contact
Cinch Connectivity Solutions
142-4701-501 by Cinch Connectivity Solutions is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a panel mount design, right angle mounting style, and operates up to 18 GHz. Ideal for applications requiring high-frequency signal transmission in electronic devices.
1050762-1
TE Connectivity 1050762-1 is an RF SMA connector with 50 ohm impedance, 0.15 dB insertion loss, and 1.18 VSWR. Ideal for RG 402 semi-rigid cables in applications requiring threaded coupling and TFE insulator material. Operating temperature range from -65 to 105 °C with gold shell finish for commercial reliability.
142-1701-616
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: MICROSTRIP; Termination Contact Finish: NICKEL; Mounting Style: STRAIGHT;
1051018-1
TE Connectivity's 1051018-1 SSMA Connector features a body length of 0.76", insertion loss of 0.13 dB, and insulation resistance of 10^10 ohm. Ideal for RF applications up to 18 GHz, this threaded coupling connector with PTFE insulator is MIL-compliant and operates b/w -65°C to 125°C.
M39012/94-3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Type: BOARD; IEC Conformity: NO;
1051113-1
TE Connectivity's 1051113-1 SSMA Connector features a 0.675" body length, 5000000000 ohm insulation resistance, and 0.21 dB insertion loss. Ideal for RF applications with RG 405 cable types, this threaded connector has a max operating frequency of 18 GHz and operates b/w -65 to 165 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73251-2201
Molex 73251-2201 is an RF SMA connector with 50 ohm impedance, 0.04 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications requiring high durability, it features a threaded coupling type, gold shell finish, and polytetrafluoroethylene insulator material. Operating b/w -65 to 165°C, it offers reliable performance up to 18 GHz frequency.
73251-1150
Molex 73251-1150 is a SSMA Connector with 0.375" body length, 5000000000 ohm insulation resistance, and 0.04 dB insertion loss. Ideal for RF applications up to 18 GHz, featuring gold nickel termination contact finish and PTFE insulator material. Suitable for commercial use with 50 ohm impedance and 1.06 VSWR.
73251-1350
Molex 73251-1350 is an RF SMA connector with 50 ohm impedance, 0.17 dB insertion loss, and 1.07 VSWR. Ideal for board and panel mounting in applications requiring a durable female jack connector with surface mount termination up to 18 GHz frequency range.
73251-2120
Molex 73251-2120 is an RF SMA connector with 0.04 dB insertion loss and 1.06 VSWR, suitable for panel mount applications. Featuring gold nickel termination, PTFE insulator, and brass shell material, it has a characteristic impedance of 50 ohm. Ideal for commercial use in board and panel mounting setups.
73251-2200
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Coupling Type: THREADED; Shell Material: BRASS;
73251-0211
Molex 73251-0211 is an RF SMA connector with 0.312 dB insertion loss, 1.42 VSWR, and 27 GHz max operating frequency. It is a threaded coupling type plug suitable for cable mounting applications requiring 50 ohm impedance and crimp solder termination.
73251-2123
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE; No. of Ports: 1;
73251-0112
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: STRAIGHT; No. of Ports: 1; Contact Style: COAX;
73251-0930
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body Depth: .45 inch; Manufacturer Series: 73251; Mounting Option-1: LOCKING; Body or Shell Style: JACK;
73251-2122
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Total No. of Contacts: 1; Characteristic Impedance: 50 ohm;
73251-2121
The Molex 73251-2121 is a SSMA connector with a body depth of 0.45 inch and a gold shell finish. It has 1 port and is designed for RF SMA connections. Its surface mount termination type makes it suitable for commercial applications.
73251-0450
Molex 73251-0450 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-316 cable type, operating in temperatures from -65 to 165 °C.
73251-0111
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; Termination Type: CRIMP;
73251-2300
RF SMA CONNECTOR; Reliability: COMMERCIAL; Characteristic Impedance: 50 ohm; Termination Type: SOLDER; Contact Material: NOT SPECIFIED; Mounting Style: STRAIGHT;
73251-0410
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; No. of Ports: 1;
73251-1351
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Body or Shell Style: JACK; Shell Material: BRASS;
73251-1353
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Style: COAX; Maximum Operating Temperature (Cel): 165;
73251-1354
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulation Resistance: 5000000000 ohm; Insertion Loss: .17 dB;
73251-1355
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Manufacturer Series: 73251; Mounting Option-1: LOCKING;
73251-1151
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Contact Finish: Gold/Nickel (Au/Ni); Maximum Operating Frequency: 18 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved