Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73251-0450 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-316 cable type, operating in temperatures from -65 to 165 °C.
Median Price
$4.960
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$2.590
100+ parts
-
1k+ parts
10k+ parts
Newark
$4.930
$4.210
$3.740
Chip1Stop
$3.900
$3.470
TTI
$5.820
$2.410
RS Americas
$4.480
$3.960
DigiKey
$6.160
$4.313
$3.573
Element14
$6.261
$4.512
Master Electronics
$3.390
$3.030
$2.070
Farnell
$4.170
Powell Electronics
$2.970
$2.670
$2.210
PSC Electronics
Verical
$5.386
Digiode
$2.898
Nova Conductors
$3.000
TestEquity
$3.450
VNN
IBS Electronics
$2.950
$2.275
$2.138
Vyrian
Semtec, LLC
ACDS - Activité Composants Distribution Service
Corphita
$2.745
Semicontronic
$2.750
$2.681
$2.668
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$3.307
Continental Prestige Electronics
$4.840
$3.780
$3.530
Modulus Dynamics
$8.522
CoreStaff
$9.626
$3.332
Andel Nordic
$9.902
$9.505
Kepictronics
Assy Fe
Perfect Parts
High insulation resistance ensures minimal signal loss and a reliable connection.
Low insertion loss helps in maintaining signal integrity and minimizing interference.
High dielectric voltage rating ensures safe operation and protection against electrical breakdown.
Polytetrafluoroethylene provides excellent electrical insulation and high temperature resistance.
High maximum operating temperature allows for use in various environmental conditions.
Low minimum operating temperature ensures reliable performance even in extreme cold conditions.
Gold shell finish offers corrosion resistance and enhances conductivity for better signal transmission.
RF SMA connectors are commonly used in high-frequency applications for their reliability and performance.
Low VSWR indicates efficient power transfer and minimal reflection loss in the system.
With a durability of 500 cycles, this connector ensures long-term use and reliability.
Cable mounting type allows for easy installation and connection to various equipment.
50 ohm characteristic impedance is ideal for RF applications and ensures proper signal transmission.
Brass shell material offers durability, corrosion resistance, and good electrical conductivity.
Designed for RG-316 cable types, ensuring compatibility and optimal performance.
Crimp termination provides a secure connection and ease of installation for the cable.
Male contact gender is commonly used for RF connections and offers a reliable mating interface.
Plug-style shell design allows for easy connection and disconnection of the connector.
Straight mounting style simplifies installation and connection in a straight-line configuration.
Coaxial contact style ensures proper signal transmission and impedance matching in high-frequency applications.
Locking mounting option provides secure and stable connection, reducing the risk of disconnection.
Designed for commercial applications, ensuring consistent performance and durability in various settings.
SSMA Connectors 73251-0450 attributes and parameters. Explore more SSMA Connectors devices from Molex
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insertion Loss:
Insulation Resistance:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73251-0450 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Diodes Incorporated
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Cheng-yi Electronic
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
132118-RP
Amphenol
Amphenol 132118-RP is a SSMA RF SMA connector with gold finish, suitable for RG-58/U cable termination. Featuring threaded coupling and 50 ohm impedance, it has a brass shell and PTFE insulator. Ideal for commercial applications requiring reliable male jack connectors with crimp termination.
1058596-1
TE Connectivity
TE Connectivity's 1058596-1 SSMA Connector features gold termination, PTFE insulator, and threaded coupling. With a frequency up to 38 GHz, it is ideal for RF applications requiring a 50 ohm impedance. This female jack connector supports RG 196 and RG 178 cables in commercial settings.
132173
Amphenol 132173 is an SSMA connector with a threaded coupling type. It has a max operating frequency of 12.4 GHz and can withstand temperatures from -65 to 165 °C. This plug-style connector is commonly used in RF applications requiring a durable, high-frequency connection.
M39012/94-3001
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Type: BOARD; IEC Conformity: NO;
CONREVSMA002-L
Linx Technologies
CONREVSMA002-L by Linx Technologies is an RF SMA connector with gold-plated brass contacts and a threaded coupling type. With 50 ohm impedance, it's ideal for board mounting applications requiring a right-angle female connector termination.
132134RP
The Amphenol 132134RP is a SSMA connector with dielectric voltage of 1400VAC, operating temperature range from -65 to 165°C, and impedance of 50 ohm. Ideal for RF applications up to 18 GHz, it features gold-nickel finish, PTFE insulator, and brass shell for reliable commercial use in board mounting setups.
142-4701-501
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Coupling Type: THREADED; Mounting Style: RIGHT ANGLE;
R125.072.000
Radiall S A
Radiall S A R125.072.000 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.21 dB Insertion Loss, and 750VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 12.4 GHz with RG-316 cable termination in commercial settings due to its durability and reliability over 500 cycles at temperatures ranging from -65 to 165 °C.
R125.680.000
Radiall S A's R125.680.000 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.3 dB Insertion Loss, and 1414VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz, this gold-finished connector has a characteristic impedance of 50 ohm and operates b/w -65°C to 165°C.
16_SMA-50-2-105/111_NE
Huber+suhner Ag
16_SMA-50-2-105/111_NE by Huber+suhner Ag is a threaded RF SMA connector with gold over nickel finish, suitable for RG-316/U cable types. It has a characteristic impedance of 50 ohm, operates b/w -65 to 165 °C, and offers durability up to 500 cycles. Ideal for commercial applications requiring reliable right-angle coax connections up to 18 GHz frequency.
132234
The Amphenol 132234 SSMA Connector features 0.14 dB insertion loss, gold termination contact finish, and threaded coupling type. With a max operating frequency of 12.4 GHz, it is ideal for RF applications requiring a 50 ohm characteristic impedance and male plug connector with crimp solder termination on cable.
142-0711-201
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: INSERTION LOSS MAX AT 10 GHZ; Body or Shell Style: RECEPTACLE; Mounting Type: BOARD;
M39012/55-4007
Amphenol's M39012/55-4007 SSMA Connector features 0.11 dB insertion loss, threaded coupling, and PTFE insulator. Ideal for RF applications up to 12.4 GHz, with 50 ohm impedance and male plug design for cable mounting using clamp solder termination.
142-1701-201
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Filter Feature: NO; Maximum Operating Frequency: 18 GHz;
63012242124506
Wuerth Elektronik & Kg
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
M39012/79B3102
TE Connectivity's M39012/79B3102 is an SSMA connector with 50 ohm impedance, 0.03 dB insertion loss, and 1.05 VSWR. Ideal for RF applications up to 18 GHz, it features a threaded coupling type and PTFE insulator material. MIL-C-39012 compliant, it operates b/w -65°C to 165°C with gold finish on stainless steel shell for high reliability in solder termination setups.
M39012/55-3028
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; IEC Conformity: NO; Manufacturer Series: SMA;
SF2921-61345-1S
Sv Microwave
RF SMA CONNECTOR;
1051164-1
TE Connectivity's 1051164-1 SSMA Connector features 0.666" body length, 0.18 dB insertion loss, and gold termination contact finish. Ideal for RF applications up to 12.4 GHz with threaded coupling type and PTFE insulator material. Suitable for RG 402 semi-rigid cables in high-temp environments (-65 to 165°C).
SF2915-6001
SF2915-6001 by Sv Microwave is an RF SMA connector with 50 ohm impedance, 12.4 GHz frequency, and 1400VAC dielectric voltage. Ideal for semi-rigid cables in applications requiring durable male plug connectors with right-angle mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73251-2201
Molex
Molex 73251-2201 is an RF SMA connector with 50 ohm impedance, 0.04 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications requiring high durability, it features a threaded coupling type, gold shell finish, and polytetrafluoroethylene insulator material. Operating b/w -65 to 165°C, it offers reliable performance up to 18 GHz frequency.
73251-1150
Molex 73251-1150 is a SSMA Connector with 0.375" body length, 5000000000 ohm insulation resistance, and 0.04 dB insertion loss. Ideal for RF applications up to 18 GHz, featuring gold nickel termination contact finish and PTFE insulator material. Suitable for commercial use with 50 ohm impedance and 1.06 VSWR.
73251-1350
Molex 73251-1350 is an RF SMA connector with 50 ohm impedance, 0.17 dB insertion loss, and 1.07 VSWR. Ideal for board and panel mounting in applications requiring a durable female jack connector with surface mount termination up to 18 GHz frequency range.
73251-2120
Molex 73251-2120 is an RF SMA connector with 0.04 dB insertion loss and 1.06 VSWR, suitable for panel mount applications. Featuring gold nickel termination, PTFE insulator, and brass shell material, it has a characteristic impedance of 50 ohm. Ideal for commercial use in board and panel mounting setups.
73251-2200
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Coupling Type: THREADED; Shell Material: BRASS;
73251-0211
Molex 73251-0211 is an RF SMA connector with 0.312 dB insertion loss, 1.42 VSWR, and 27 GHz max operating frequency. It is a threaded coupling type plug suitable for cable mounting applications requiring 50 ohm impedance and crimp solder termination.
73251-1352
Molex 73251-1352 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz with FEMALE contact gender, POLYTETRAFLUOROETHYLENE insulator material, and NICKEL shell finish.
73251-2123
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE; No. of Ports: 1;
73251-0112
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: STRAIGHT; No. of Ports: 1; Contact Style: COAX;
73251-0930
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body Depth: .45 inch; Manufacturer Series: 73251; Mounting Option-1: LOCKING; Body or Shell Style: JACK;
73251-2122
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Total No. of Contacts: 1; Characteristic Impedance: 50 ohm;
73251-2121
The Molex 73251-2121 is a SSMA connector with a body depth of 0.45 inch and a gold shell finish. It has 1 port and is designed for RF SMA connections. Its surface mount termination type makes it suitable for commercial applications.
73251-0111
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; Termination Type: CRIMP;
73251-2300
RF SMA CONNECTOR; Reliability: COMMERCIAL; Characteristic Impedance: 50 ohm; Termination Type: SOLDER; Contact Material: NOT SPECIFIED; Mounting Style: STRAIGHT;
73251-0410
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; No. of Ports: 1;
73251-0452
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Durability: 500 Cycles; No. of Ports: 1;
73251-0454
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Shell Material: BRASS; Mounting Option-1: LOCKING;
73251-0456
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulation Resistance: 5000000000 ohm; No. of Ports: 1;
73251-0457
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Shell Material: BRASS; Characteristic Impedance: 50 ohm;
73251-0458
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Durability: 500 Cycles; Voltage Standing Wave Ratio: 1.07;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved