Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1052523-1 is an RF SMA connector with threaded coupling, TFE insulator, and stainless steel shell. It has a low insertion loss of 0.13 dB and high insulation resistance of 10^10 ohm. Ideal for commercial applications requiring reliable performance up to 18 GHz in temperatures ranging from -65 to 125°C.
Median Price
$8.523
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$1.430
100+ parts
$1.120
1k+ parts
-
10k+ parts
Master Electronics
$7.876
$6.550
$6.180
Newark
$9.170
$7.370
Farnell
$9.370
$6.600
Element14
$12.340
$9.930
$8.860
Avnet
$5.710
$5.418
Digiode
$1.358
Vyrian
Electro Sonic
$10.360
$7.870
$7.120
IBS Electronics
$11.105
$9.236
$8.714
VNN
Nova Conductors
R&J Components
M&R Communications
Semi Source
Corphita
$1.287
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Robosynatics
$6.234
$6.107
Lucentia Tech
Kepictronics
Assy Fe
Aranea Global
Perfect Parts
Easy and secure installation on panels, suitable for various applications.
Standard length for easy connectivity and compatibility with existing equipment.
High insulation resistance ensures reliable signal transmission and reduces interference.
Low insertion loss for minimal signal degradation and efficient performance.
High maximum operating temperature allows for use in various environmental conditions.
RF SMA connector offering reliable and high-frequency signal transmission.
Standard impedance for compatibility with a wide range of RF applications.
Durable stainless steel shell for long-lasting performance and protection.
Solder termination for secure and stable connection.
High operating frequency for handling high-speed data transmission and communication.
SSMA Connectors 1052523-1 attributes and parameters. Explore more SSMA Connectors devices from TE Connectivity
Additional Features:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insertion Loss:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
Minimum Withdrawal Force (N):
1052523-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Taiwan Semiconductor
EU2B-YS303C
Idec
ROTARY SWITCH;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
R125.462.000
Radiall S A
Radiall S A's R125.462.000 RF SMA Connector features 0.3 dB insertion loss, 1.1 VSWR, and 50 ohm impedance for up to 18 GHz applications. With a gold termination finish and PTFE insulator, this threaded coupling type connector is panel mountable and has a female contact gender.
60311002111526
Wuerth Elektronik & Kg
RF SMA CONNECTOR;
22_SMA-50-0-15/111_NE
Huber+suhner Ag
22_SMA-50-0-15/111_NE by Huber+suhner Ag is a SSMA Connector with gold termination, threaded coupling, and beryllium copper shell. It operates from -65 to 165°C, has 50 ohm impedance, and supports up to 18 GHz frequency. Ideal for commercial applications requiring reliable RF connections in harsh environments.
142-0801-811
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; Termination Type: SURFACE MOUNT;
5229-1
Carlisle Interconnect Technologies
The Carlisle Interconnect Technologies 5229-1 SSMA Connector features an Insulation Resistance of 5x10^9 ohm, Insertion Loss of 0.03 dB, and Dielectric Withstanding Voltage of 2100VAC. Ideal for RF applications up to 18 GHz with a characteristic impedance of 50 ohm.
1045496-1
TE Connectivity
TE Connectivity's 1045496-1 SSMA Connector features threaded coupling, gold termination finish, and PTFE insulator. With a frequency up to 38 GHz, it is ideal for RF applications requiring a 50 ohm impedance. The connector is designed for use with RG 196 and RG 178 cables in high-frequency environments.
5350-3
The Carlisle Interconnect Technologies 5350-3 is an RF SMA CONNECTOR with MALE contact gender and COAX style. It features a 0.05" terminal length, STRAIGHT mounting style, and LOCKING option. Ideal for commercial applications requiring reliable SSMA connectors.
142-0711-201
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Type: BOARD; Mating Contact Finish: NOT SPECIFIED;
25_SMA-50-3-15/111_NE
25_SMA-50-3-15/111_NE by Huber+suhner Ag is a threaded RF SMA connector with gold finish, suitable for panel mounting. It has a characteristic impedance of 50 ohm, can operate b/w -65 to 165 °C, and withstands up to 18 GHz frequency. Ideal for applications requiring durable female jack connectors with solder termination.
1050750-1
TE Connectivity's 1050750-1 SSMA Connector features a body length of 1", insertion loss of 0.13 dB, and insulation resistance of 5G ohm. Ideal for RF applications with characteristic impedance of 50 ohm, it operates b/w -65 to 105°C, suitable for semi-rigid cables up to 0.250".
2052-1352-02
TE Connectivity's 2052-1352-02 SSMA Connector features gold termination with nickel barrier, threaded coupling, and PTFE insulator. With a frequency range up to 18 GHz, it is ideal for RF applications requiring a 50 ohm impedance. The connector has a female gender, straight mounting style, and operates b/w -65°C to 125°C.
1-1478908-0
TE Connectivity 1-1478908-0 is an RF SMA connector with threaded coupling, suitable for RG-174A/U, RG-188A/U, and RG-316/U cables. Featuring a 50 ohm impedance, it has a stainless steel shell with gold finish and operates b/w -65 to 165°C. Ideal for applications requiring a male plug coax contact at frequencies up to 26 GHz.
142-0701-411
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
M39012/60-3001
Kings Electronics
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Panel Mount: YES; DIN Conformance: NO;
141-0701-402
Bel Fuse
Bel Fuse's 141-0701-402 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications up to 18 GHz with a durability of 500 Cycles.
132195RP
Amphenol
132195RP by Amphenol is an RF SMA connector with a body depth of 0.331". It features a gold shell finish and uses POLYTETRAFLUOROETHYLENE as the insulator material. Ideal for commercial applications, this SSMA connector is designed for RG-55/U cable termination with a crimp style contact.
901-9601-3
Amphenol's 901-9601-3 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.11 dB and can operate at frequencies up to 12.4 GHz. This connector is commonly used in cable applications requiring a 50 ohm characteristic impedance.
SMA-J-P-GF-RA-SM1
Samtec
SMA-J-P-GF-RA-SM1 by Samtec is a RF SMA connector with gold termination, threaded coupling, and right-angle mounting. Operating at 18 GHz, it's ideal for commercial applications requiring reliable surface mount female connectors.
M39012/59-3009
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-C-39012; Panel Mount: YES; Coupling Type: THREADED;
132291
Amphenol 132291 is an RF SMA connector with gold termination, threaded coupling, and PTFE insulator. It has a 50 ohm impedance, solder termination, and female contact gender. Ideal for board and panel mounting applications requiring MIL conformity in SSMA connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1052030-1
TE Connectivity's 1052030-1 is an RF SMA connector with threaded coupling, TFE insulator, and gold shell finish. With 50 ohm impedance, it operates from -65 to 165°C and handles RG 196 cables. Ideal for commercial applications up to 12.4 GHz requiring high insulation resistance and low insertion loss.
1052634-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; IEC Conformity: NO; Additional Features: CAPTIVE CONTACT; Characteristic Impedance: 50 ohm;
1052634-1 by TE Connectivity is a SSMA Connector with 0.375" body length, 5000000000 ohm insulation resistance, and 0.17 dB insertion loss. Ideal for RF applications up to 18 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and stainless steel shell.
1052978-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: CAPTIVE CONTACT; MIL Conformity: NO; Filter Feature: NO;
TE Connectivity 1052978-1 is an SSMA Connector with 0.505" body length, 5000000000 ohm insulation resistance, and 0.28 dB insertion loss. Ideal for RF applications up to 12.4 GHz, it features a threaded coupling type and PTFE insulator material.
1052962-1
TE Connectivity's 1052962-1 SSMA Connector has a body length of 0.375", insertion loss of 0.07 dB, and insulation resistance of 5000000000 ohm. Ideal for RF applications, this threaded connector features a max operating frequency of 12.4 GHz and is designed with a characteristic impedance of 50 ohm.
1052422-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
1052552-1
TE Connectivity's 1052552-1 SSMA Connector features gold termination, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 18 GHz with a temperature range of -65 to 125°C. Suitable for commercial use in high-frequency panels requiring reliable female jack connectors.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Contact Material: BERYLLIUM COPPER; Termination Contact Finish: GOLD;
1052902-1
TE Connectivity's 1052902-1 is an RF SMA connector with threaded coupling, 0.375" body length, and 50 ohm impedance. Ideal for applications requiring a female contact gender, it operates at temperatures from -65 to 125°C and supports frequencies up to 18 GHz.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Mounting Style: STRAIGHT; IEC Conformity: NO;
1052604-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
1052963-1
TE Connectivity's 1052963-1 is an SSMA connector with a threaded coupling type and panel mount capability. It features a polytetrafluoroethylene insulator material, beryllium copper contact material, and a gold mating contact finish. This RF SMA connector is commonly used in applications with a max operating frequency of 12.4 GHz.
1052522-1
TE Connectivity's 1052522-1 SSMA Connector features a threaded coupling type, TFE insulator material, and gold shell finish. With a 50 ohm impedance and 18 GHz operating frequency, it is ideal for RF applications requiring high reliability in commercial settings. The panel-mount connector has a female contact gender and straight mounting style for easy installation.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Body or Shell Style: RECEPTACLE; Filter Feature: NO;
1052181-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE;
1052897-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
1052508-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO;
1052551-1
TE Connectivity's 1052551-1 is a panel mount SSMA connector with a body length of 1.079 inch and insulation resistance of 10^10 ohm. It is used in RF applications up to 18 GHz, offering a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.14.
1052901-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: PANEL; Body or Shell Style: JACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved