Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
132195RP by Amphenol is an RF SMA connector with a body depth of 0.331". It features a gold shell finish and uses POLYTETRAFLUOROETHYLENE as the insulator material. Ideal for commercial applications, this SSMA connector is designed for RG-55/U cable termination with a crimp style contact.
Median Price
$9.700
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.500
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$9.596
$7.739
$7.616
Farnell
$7.430
TTI
$11.530
$7.650
Mouser Electronics
$11.830
$8.560
$7.310
DigiKey
$11.910
$8.604
$7.314
Newark
$13.560
$10.080
Element14
$15.910
$11.310
$9.410
Verical
$8.941
$8.318
Arrow
$1.087
Powell Electronics
$6.080
$4.670
Vyrian
VNN
IBS Electronics
$10.659
$8.681
Electro Sonic
$4.840
$4.620
$4.600
Nova Conductors
Ampacity Inc.
$2.130
Gateway Technologies
$3.000
$2.669
Singapore Electronics
$3.300
$3.068
$2.936
$2.804
Continental Prestige Electronics
$10.060
$8.250
Argo Parts USA
Perfect Parts
Netroflash
The shallow body depth allows for a compact design, making this connector suitable for applications where space is limited.
Polytetrafluoroethylene provides excellent electrical insulation properties and ensures stable performance even in high-frequency applications.
The gold shell finish enhances conductivity and offers superior corrosion resistance, making this connector durable and reliable.
The RF SMA connector type is widely used in RF applications, ensuring compatibility and ease of integration with existing setups.
The natural insulator color allows for easy identification and maintenance of the connector in system installations.
The cable mounting type simplifies installation and provides a secure connection, suitable for a variety of cable types including RG-55/U.
Brass shell material offers durability and ensures electrical stability, making this connector suitable for commercial applications.
The crimp termination type provides a reliable and efficient method for securing the connector to the cable, ensuring a stable connection.
The female contact gender allows for easy mating with compatible male connectors, offering versatility in system configurations.
The plug body or shell style provides a secure and stable connection, ideal for applications where frequent mating and unmating is required.
The straight mounting style ensures a direct and efficient connection, suitable for installations where a straight cable path is desired.
The coax contact style ensures optimal signal transmission and impedance matching, making this connector ideal for high-frequency applications.
The locking mounting option provides added security and stability, preventing accidental disconnection in demanding environments.
The commercial reliability rating ensures that this connector meets industry standards for performance and durability, making it a trusted choice for commercial applications.
SSMA Connectors 132195RP attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Cable Types:
Connector Type:
Contact Gender:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
132195RP Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semtech
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Bharat Electronics
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Bytesonic Electronics
Temic Semiconductors
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
221789-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Coupling Type: THREADED; Body or Shell Style: JACK;
142-0771-831
Bel Fuse
Bel Fuse's 142-0771-831 SSMA Connector features a body diameter of 0.247", insulation resistance of 1000000000 ohm, and dielectric voltage of 700VAC. Ideal for RF applications, this connector has a max operating frequency of 26.5 GHz and durability up to 500 cycles in commercial settings.
1056462-1
TE Connectivity
TE Connectivity's 1056462-1 SSMA Connector features 0.665" body length, 5000000000 ohm insulation resistance, and 0.17 dB insertion loss. Ideal for RF applications up to 6 GHz with RG-174/U cable termination in commercial settings.
R125.426.000W
Radiall S A
R125.426.000W by Radiall S A is a RF SMA CONNECTOR with 50 ohm impedance, 0.05 dB insertion loss, and 1.04 VSWR. It is ideal for board mounting applications in commercial settings, offering durability of 500 cycles and operating frequency up to 18 GHz.
BJ77
Trompeter Electronics
RF SMA/SSMA Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Body or Shell Style: JACK; Body Depth: .487 inch;
142-0403-011
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .21 dB; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
TC-400-SM-X
L-com
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: THREADED; IEC Conformity: NO; Mounting Type: CABLE;
CONREVSMA009
Linx Technologies
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
R125426000
R125426000 by Radiall S A is a SSMA Connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.12 VSWR. It is used in RF applications up to 18 GHz, featuring gold over nickel finish, PTFE insulator, and female contact gender for durability and reliability in commercial settings.
901-9602-1SF
Amphenol
Amphenol 901-9602-1SF is an RF SMA connector with 0.11 dB insertion loss, 1.29 VSWR, and 12.4 GHz max operating frequency. It features threaded coupling, gold termination finish, and PTFE insulator for high-frequency applications in cable connections.
132225
Amphenol 132225 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for board mounting applications requiring solder termination, featuring a female contact gender and right-angle mounting style.
901-9610-3
Amphenol 901-9610-3 is an RF SMA connector with 0.11 dB insertion loss, gold termination finish, and 12.4 GHz max operating frequency. Ideal for commercial applications requiring a 50 ohm characteristic impedance, it features a threaded coupling type and PTFE insulator material for reliable performance in panel mount installations.
142-1701-841
RF SMA CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
SMA-P-C-H-ST-CA1
Samtec
SMA-P-C-H-ST-CA1 by Samtec is an RF SMA connector with 50 ohm impedance, PTFE insulator, and gold-plated contacts. It has a dielectric voltage of 1400VAC and operates b/w -65 to 125°C. Ideal for commercial applications requiring reliable signal transmission up to 6 GHz using RG-174 cable termination.
901-10512-2
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
73251-2300
Molex
Molex 73251-2300 is a RF SMA CONNECTOR with 50 ohm impedance, ideal for BOARD mounting. Featuring JACK body style, it offers SOLDER termination and COAX contact style. Commonly used in commercial applications requiring reliable LOCKING mounting option.
9008-1113-000
Radiall S A's 9008-1113-000 SSMA Connector features 0.07 dB Insertion Loss, Gold (Au) - with Nickel (Ni) Termination Contact Finish, and a max operating frequency of 18 GHz. Ideal for RF applications requiring durability with 500 cycles and a characteristic impedance of 50 ohm.
16SMA-50-2-100/199NH
Huber+suhner Ag
16SMA-50-2-100/199NH by Huber+suhner Ag is an RF SMA connector with a threaded coupling type. It has an insertion loss of 0.5 dB and operates at frequencies up to 26.5 GHz. Ideal for commercial applications requiring a durable, right-angle plug with a characteristic impedance of 50 ohm.
M39012/59-3009
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-C-39012; Panel Mount: YES; Coupling Type: THREADED;
142-9701-301
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; IEC Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132134RP
The Amphenol 132134RP is a SSMA connector with dielectric voltage of 1400VAC, operating temperature range from -65 to 165°C, and impedance of 50 ohm. Ideal for RF applications up to 18 GHz, it features gold-nickel finish, PTFE insulator, and brass shell for reliable commercial use in board mounting setups.
132134
Amphenol 132134 is an RF SMA connector with threaded coupling, gold over nickel finish, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and female contact gender. Ideal for board mounting applications requiring a straight jack configuration.
132134-15
Amphenol 132134-15 is an RF SMA connector with a threaded coupling type, suitable for board mounting. With a dielectric voltage of 1400VAC, it operates b/w -65 to 165°C and has a max frequency of 12.4 GHz. The connector features a gold shell finish, PTFE insulator material, and offers durability up to 500 cycles.
132114
Amphenol 132114 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and CRIMP termination on CABLE mounting.
132134-10
Amphenol 132134-10 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for surface mount termination in applications requiring a female jack connector on a straight board mount.
132114RP
132114RP by Amphenol is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. It is a male plug connector for crimp solder termination on cables. Ideal for applications requiring reliable RF connections in straight mounting configurations.
132134-11
Amphenol 132134-11 is a RF SMA connector with threaded coupling, suitable for board mounting. Features include gold shell finish, PTFE insulator, and brass shell material. With 50 ohm impedance and max frequency of 18 GHz, it's ideal for high-frequency applications in temperatures ranging from -65 to 165°C.
132113RP
Amphenol's 132113RP is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a characteristic impedance of 50 ohm and is commonly used with RG-58C/U cables for commercial applications.
132123RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Shell Finish: GOLD; Mounting Style: RIGHT ANGLE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Option-1: LOCKING;
132123
Amphenol 132123 is an RF SMA connector with a characteristic impedance of 50 ohm, suitable for RG-174/U cable types. It features a dielectric voltage of 1400VAC and insertion loss of 0.14 dB, making it ideal for applications requiring durability up to 500 cycles at temperatures ranging from -65 to 165 °C.
132108
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Voltage Standing Wave Ratio: 1.14; Mounting Type: CABLE AND PANEL;
132136
Amphenol 132136 is an RF SMA connector with a characteristic impedance of 50 ohm and a max operating frequency of 6 GHz. Featuring gold termination contact finish, it has a durability of 500 cycles and operates b/w -65 to 165 °C. Ideal for board mounting applications in telecommunications and aerospace industries.
132170-12N
RF SMA CONNECTOR;
132136-12
Amphenol 132136-12 is an RF SMA connector with gold shell finish, brass shell material, and PTFE insulator. It has a right-angle mounting style for board termination. Ideal for commercial applications requiring reliable coaxial connections in tight spaces.
132113
Amphenol 132113 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.14 dB Insertion Loss, and 1000VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-58 cable type, operating from -65 to 165 °C at frequencies up to 12.4 GHz.
132108RP
The Amphenol 132108RP is an RF SMA connector with a body depth of 0.31". It features a gold shell finish and PTFE insulator material. Ideal for commercial applications, this SSMA connector has a male contact gender and straight mounting style.
132118-RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Filter Feature: NO; No. of Ports: 1; Shell Finish: GOLD;
132178
Amphenol 132178 is an RF SMA connector with 0.14 dB insertion loss, threaded coupling type, and gold termination contact finish. It has a max operating frequency of 12.4 GHz and is suitable for applications requiring a 50 ohm characteristic impedance, such as cable mounting in high-frequency communication systems.
132111
The Amphenol 132111 SSMA Connector features 0.14 dB insertion loss, GOLD termination contact finish, and THREADED coupling type. Ideal for RF applications up to 12.4 GHz, this connector has a POLYTETRAFLUOROETHYLENE insulator and BRASS contact material for reliable performance in high-frequency environments.
132117
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Insulator Color: NATURAL; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved