Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol 132111 SSMA Connector features 0.14 dB insertion loss, GOLD termination contact finish, and THREADED coupling type. Ideal for RF applications up to 12.4 GHz, this connector has a POLYTETRAFLUOROETHYLENE insulator and BRASS contact material for reliable performance in high-frequency environments.
Median Price
$9.650
Lifecycle Status
Suppliers In-Stock
34
In-Stock Inventory
1k+
Arrow
1+ parts
$6.708
100+ parts
$4.900
1k+ parts
-
10k+ parts
Powell Electronics
$6.890
$6.790
PEI Genesis
$8.620
$7.930
$7.160
Heilind Electronics
$9.015
$7.270
TTI Europe
$9.296
$7.552
Interstate Connecting
$9.476
$7.637
$7.416
TTI
$8.030
$7.760
DigiKey
$10.780
$7.789
$6.622
Mouser Electronics
$11.120
RS Americas
$12.200
Element14
$13.150
Chip1Stop
$13.600
Newark
$14.780
$13.480
$13.340
Master Electronics
$6.520
$6.420
Verical
$13.944
Freelance Electronics
$1.565
Component Electronics Inc.
$6.150
$4.620
$4.000
DF Sales Co.
$7.000
TestEquity
$13.620
Nova Conductors
$16.710
Vyrian
Electro Sonic
$7.210
$6.270
VNN
Microwave Components, LLC
Q Components
Lantek
Sensible Micro Corp
American Microsemiconductor Inc.
American Connector Supply Corp
Elcom Components
SPM Sales
IBS Electronics
$10.715
$9.341
EMSNET
Ampacity Inc.
$5.200
Gateway Technologies
$6.974
$6.206
Singapore Electronics
$7.671
$7.134
$6.827
Continental Prestige Electronics
$16.376
Kepictronics
Perfect Parts
Argo Parts USA
Eastek
Low insertion loss ensures minimal signal loss, making this connector ideal for high-frequency applications.
Gold termination contact finish provides excellent conductivity and corrosion resistance, ensuring reliable performance.
Threaded coupling type offers secure connections that are resistant to vibration and environmental factors.
PTFE insulator material ensures high dielectric strength and stable performance in extreme conditions.
SMA connectors are widely used in RF applications for their reliable performance and versatility.
Brass contact material offers good conductivity and durability, making it suitable for long-term use.
Gold mating contact finish ensures consistent performance and prevents signal degradation over time.
Cable mounting type makes it easy to integrate this connector into existing cable assemblies for quick and convenient installation.
50 ohm characteristic impedance is standard for RF applications, ensuring compatibility with a wide range of equipment.
Solder termination type offers a reliable and permanent connection for superior signal integrity.
Male contact gender is common in RF applications and allows for easy mating with female connectors.
Plug body style provides a compact and easy-to-use design for efficient connectivity in tight spaces.
Right-angle mounting style allows for flexibility in installation and is ideal for applications with limited space.
With a high operating frequency, this connector is suitable for demanding RF applications that require reliable signal transmission.
SSMA Connectors 132111 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
132111 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
1560-15-045-0220, 1560150450220, 2930-00-136-2124, 2930001362124, 3020-22-262-1466, 3020222621466, 5330-00-052-1845, 5330000521845, 5820-12-147-2438, 5820121472438
NIIN
150450220, 001362124, 222621466, 000521845, 121472438
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STMicroelectronics
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Transys Electronics
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Harris Semiconductor
132241
Amphenol
Amphenol 132241 is an RF SMA Connector with 0.14 dB Insertion Loss, gold termination contact finish, and threaded coupling type. Ideal for applications requiring a 50 ohm characteristic impedance, it can be panel mounted and operates up to 12.4 GHz frequency.
142-0701-631
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); Filter Feature: NO; Mounting Style: STRAIGHT;
142-1701-616
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: MICROSTRIP; Termination Contact Finish: NICKEL; Mounting Style: STRAIGHT;
M39012/55-3026
Radiall S A
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Termination Type: CRIMP; Panel Mount: NO;
142-1701-841
Bel Fuse
RF SMA CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1052978-1
TE Connectivity
TE Connectivity 1052978-1 is an SSMA Connector with 0.505" body length, 5000000000 ohm insulation resistance, and 0.28 dB insertion loss. Ideal for RF applications up to 12.4 GHz, it features a threaded coupling type and PTFE insulator material.
142-0203-101
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 12.4 GHz; Mounting Type: CABLE; MIL Conformity: NO;
1051639-1
TE Connectivity's 1051639-1 SSMA Connector features TFE insulator, gold shell finish, and 50 ohm impedance. Ideal for RF applications up to 18 GHz with RG 141 cable termination in commercial settings.
1052523-1
TE Connectivity 1052523-1 is an RF SMA connector with threaded coupling, TFE insulator, and stainless steel shell. It has a low insertion loss of 0.13 dB and high insulation resistance of 10^10 ohm. Ideal for commercial applications requiring reliable performance up to 18 GHz in temperatures ranging from -65 to 125°C.
142-0701-841
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Termination Type: SURFACE MOUNT; IEC Conformity: NO;
142-0761-891
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; JESD-609 Code: e4; Additional Features: VSWR: 1.41 AT 18 GHZ;
132194RP
Amphenol 132194RP is an RF SMA connector with 0.674" body depth, gold shell finish, and PTFE insulator. It's a female coax plug for RG-223/U cable termination in right-angle mounting applications. Known for commercial reliability, it offers secure locking mounting option.
132170-12N
RF SMA CONNECTOR;
2903-6001
Sv Microwave
The SV Microwave SSMA Connector 2903-6001 features a dielectric voltage of 1050VAC, insulation resistance of 5000000000 ohm, and operates up to 12.4 GHz. Ideal for RF applications, it has a MIL-G-45204 reliability rating and can withstand temperatures from -65 to 165 °C.
5205-2
Carlisle Interconnect Technologies
The Carlisle Interconnect Technologies 5205-2 is an RF SMA connector with a panel mount feature and stainless steel shell. It has a body depth of 0.445" and uses polytetrafluoroethylene as the insulator material. Ideal for commercial applications requiring reliable coaxial connections.
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.5; Filter Feature: NO; IEC Conformity: NO;
930-129P-51S
Amphenol 930-129P-51S is a threaded RF SMA connector with 1.11 VSWR, 50 ohm impedance, and max frequency of 6 GHz. Ideal for cable assemblies, it features a male plug body for straight mounting applications.
9408-1113-000
Radiall S A's 9408-1113-000 SSMA Connector features gold termination with nickel barrier, threaded coupling, and PTFE insulator. With a 50 ohm impedance and 18 GHz operating frequency, it is ideal for RF applications requiring high reliability in commercial settings.
R125.603.000
Radiall S A R125.603.000 is a RF SMA connector with 50 ohm impedance, gold-plated contacts, and PTFE insulator for high durability. With insertion loss of 1.27 dB and VSWR of 1.28, it's ideal for applications requiring reliable signal transmission up to 18 GHz in commercial settings.
142-0711-841
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Contact Material: NOT SPECIFIED; Mounting Style: STRAIGHT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132134RP
The Amphenol 132134RP is a SSMA connector with dielectric voltage of 1400VAC, operating temperature range from -65 to 165°C, and impedance of 50 ohm. Ideal for RF applications up to 18 GHz, it features gold-nickel finish, PTFE insulator, and brass shell for reliable commercial use in board mounting setups.
132134
Amphenol 132134 is an RF SMA connector with threaded coupling, gold over nickel finish, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and female contact gender. Ideal for board mounting applications requiring a straight jack configuration.
132134-15
Amphenol 132134-15 is an RF SMA connector with a threaded coupling type, suitable for board mounting. With a dielectric voltage of 1400VAC, it operates b/w -65 to 165°C and has a max frequency of 12.4 GHz. The connector features a gold shell finish, PTFE insulator material, and offers durability up to 500 cycles.
132114
Amphenol 132114 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and CRIMP termination on CABLE mounting.
132134-10
Amphenol 132134-10 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for surface mount termination in applications requiring a female jack connector on a straight board mount.
132114RP
132114RP by Amphenol is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. It is a male plug connector for crimp solder termination on cables. Ideal for applications requiring reliable RF connections in straight mounting configurations.
132134-11
Amphenol 132134-11 is a RF SMA connector with threaded coupling, suitable for board mounting. Features include gold shell finish, PTFE insulator, and brass shell material. With 50 ohm impedance and max frequency of 18 GHz, it's ideal for high-frequency applications in temperatures ranging from -65 to 165°C.
132113RP
Amphenol's 132113RP is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a characteristic impedance of 50 ohm and is commonly used with RG-58C/U cables for commercial applications.
132123RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Shell Finish: GOLD; Mounting Style: RIGHT ANGLE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Option-1: LOCKING;
132123
Amphenol 132123 is an RF SMA connector with a characteristic impedance of 50 ohm, suitable for RG-174/U cable types. It features a dielectric voltage of 1400VAC and insertion loss of 0.14 dB, making it ideal for applications requiring durability up to 500 cycles at temperatures ranging from -65 to 165 °C.
132108
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Voltage Standing Wave Ratio: 1.14; Mounting Type: CABLE AND PANEL;
132136
Amphenol 132136 is an RF SMA connector with a characteristic impedance of 50 ohm and a max operating frequency of 6 GHz. Featuring gold termination contact finish, it has a durability of 500 cycles and operates b/w -65 to 165 °C. Ideal for board mounting applications in telecommunications and aerospace industries.
132136-12
Amphenol 132136-12 is an RF SMA connector with gold shell finish, brass shell material, and PTFE insulator. It has a right-angle mounting style for board termination. Ideal for commercial applications requiring reliable coaxial connections in tight spaces.
132113
Amphenol 132113 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.14 dB Insertion Loss, and 1000VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-58 cable type, operating from -65 to 165 °C at frequencies up to 12.4 GHz.
132108RP
The Amphenol 132108RP is an RF SMA connector with a body depth of 0.31". It features a gold shell finish and PTFE insulator material. Ideal for commercial applications, this SSMA connector has a male contact gender and straight mounting style.
132118-RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Filter Feature: NO; No. of Ports: 1; Shell Finish: GOLD;
132178
Amphenol 132178 is an RF SMA connector with 0.14 dB insertion loss, threaded coupling type, and gold termination contact finish. It has a max operating frequency of 12.4 GHz and is suitable for applications requiring a 50 ohm characteristic impedance, such as cable mounting in high-frequency communication systems.
132117
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Insulator Color: NATURAL; JESD-609 Code: e4;
132114SS
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: YES; Coupling Type: THREADED; Mounting Type: CABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved