Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 132136 is an RF SMA connector with a characteristic impedance of 50 ohm and a max operating frequency of 6 GHz. Featuring gold termination contact finish, it has a durability of 500 cycles and operates b/w -65 to 165 °C. Ideal for board mounting applications in telecommunications and aerospace industries.
Median Price
$9.665
Lifecycle Status
Suppliers In-Stock
44
In-Stock Inventory
1k+
Newark
1+ parts
$4.870
100+ parts
1k+ parts
10k+ parts
-
RS (Exports)
$5.420
TTI Europe
$7.033
$6.370
Avnet
$9.324
$6.932
$6.138
DigiKey
$9.880
$7.136
$6.904
RS Americas
$10.320
$8.870
TTI
$10.490
$7.320
$7.170
Mouser Electronics
$10.740
$7.750
$7.590
Farnell
$10.973
$8.236
$7.823
Element14
$15.220
$12.250
$10.160
Encitech
$77.630
Master Electronics
$5.290
$5.210
Verical
$9.366
$8.997
Powell Electronics
$9.450
$9.080
$8.690
Arrow
$10.551
$9.096
$8.804
Richardson RFPD
$7.720
Chip1Stop
TME
$11.240
$9.140
Nova Conductors
$11.360
TestEquity
$11.830
Maritex
$22.942
$14.822
VNN
IBS Electronics
$7.419
$7.363
Bristol Electronics
Atlantic Semiconductor
NAC Semi
$14.030
$12.950
LWI Electronics Inc
Vyrian
Electro Sonic
$7.430
$5.910
R&J Components
Inventory MP
Connector Distribution Corp
Right Parts Inc.
Resion
South Electronics
Sensible Micro Corp
American Microsemiconductor Inc.
Rebound Electronics
PC Components Company LLC
LIBRA Elektronik GmbH
American Connector Supply Corp
Semtec, LLC
J & M Industries LLC
Prism Electronics
Ampacity Inc.
$5.980
Semicontronic
$5.830
$5.801
Abianca Electronics
$7.047
$6.765
Gateway Technologies
$7.575
$6.741
Continental Prestige Electronics
$7.595
$7.443
Singapore Electronics
$8.332
$7.748
$7.415
$7.082
Eastek
$8.650
Aztec Data Supply Inc.
$10.750
Netroflash
Argo Parts USA
Kepictronics
Glotronic Ltd.
Abacus Technologies
GreenTree Electronics
Robosynatics
Lucentia Tech
$6.688
Optimal body length for easy installation and compatibility with various equipment.
Compact body width provides space-saving design for densely populated applications.
High dielectric strength ensures reliable insulation and safety in high voltage applications.
Gold contact finish ensures excellent conductivity, corrosion resistance, and long-term durability.
Sufficient body depth for secure connection and handling during installation.
Threaded coupling provides a secure and reliable connection that can withstand vibrations and environmental factors.
PTFE insulator material offers high temperature resistance, low dielectric constant, and stability in various operating conditions.
High maximum operating temperature allows for use in demanding environments without compromising performance.
Low minimum operating temperature ensures reliable performance in extreme cold conditions.
Gold shell finish provides excellent corrosion resistance and signal integrity for long-lasting performance.
RF SMA Connector type ensures compatibility with a wide range of RF applications and devices.
Low VSWR value indicates minimal signal reflections and efficient power transmission.
500 cycles durability ensures long-term reliability and repeated connection/disconnection without degradation in performance.
Board mounting type provides easy and secure installation on PCBs for streamlined assembly processes.
50 ohm characteristic impedance ensures optimal signal integrity and matching for RF applications.
Brass shell material offers durability, strength, and excellent electrical conductivity for reliable performance.
Solder termination type ensures secure and reliable connections for consistent signal transmission.
Female contact gender for mating with male connectors, ensuring compatibility and secure connections.
Jack style body or shell design for versatility and compatibility with various equipment and applications.
Right angle mounting style for convenient installation and space-saving design in compact spaces.
Coaxial contact style for excellent RF signal transmission, impedance matching, and minimal signal loss.
Optimal terminal length for secure and reliable connections in various applications.
High maximum operating frequency of 6 GHz for compatibility with high-frequency RF applications and devices.
SSMA Connectors 132136 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Termination Contact Finish:
Contact Gender:
Contact Style:
Coupling Type:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
Insulator Material:
JESD-609 Code:
Mating Info.:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
132136 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5180-14-403-5050, 5180144035050
NIIN
144035050
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Formosa Microsemi
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Philips Components
EU2B-YS3303C
Idec
ROTARY SWITCH;
Hitano Enterprise
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Fairchild Semiconductor
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
11_SMA-50-3-10/111_NE
Huber+suhner Ag
11_SMA-50-3-10/111_NE by Huber+suhner Ag is a RF SMA connector with gold/nickel finish, suitable for commercial applications up to 18 GHz. Featuring a threaded coupling type, it has a durability of 500 cycles and operates b/w -65°C to 165°C. Ideal for cable mounting, this male plug connector offers a characteristic impedance of 50 ohms.
SMA-J-P-H-ST-EM1
Samtec
SMA-J-P-H-ST-EM1 by Samtec is a RF SMA connector with gold finish, threaded coupling, and 18 GHz operating frequency. Ideal for commercial applications requiring reliable surface mount female connectors on boards.
CONREVSMA002-L
Linx Technologies
CONREVSMA002-L by Linx Technologies is an RF SMA connector with gold-plated brass contacts and a threaded coupling type. With 50 ohm impedance, it's ideal for board mounting applications requiring a right-angle female connector termination.
SF2921-61506
Sv Microwave
RF SMA CONNECTOR;
901-9868-RFX
Amphenol
Amphenol's 901-9868-RFX is an RF SMA connector with a threaded coupling type. It has a low insertion loss of 0.25 dB and operates at a max frequency of 18 GHz. This male plug connector, with gold termination contact finish, is commonly used in cable applications for its 50 ohm characteristic impedance and solder termination type.
SMA6252A2-3GT50G-50
Amphenol's SMA6252A2-3GT50G-50 is a threaded RF SMA connector with 50 ohm impedance, PTFE insulator, and solder termination. Ideal for board mounting in applications requiring a female jack connector with right-angle mounting style.
142-0701-231
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Characteristic Impedance: 50 ohm;
132123
Amphenol 132123 is an RF SMA connector with a characteristic impedance of 50 ohm, suitable for RG-174/U cable types. It features a dielectric voltage of 1400VAC and insertion loss of 0.14 dB, making it ideal for applications requiring durability up to 500 cycles at temperatures ranging from -65 to 165 °C.
901-9891-RFX
Amphenol's 901-9891-RFX is an RF SMA connector with threaded coupling, gold termination and mating contact finish. Featuring a low insertion loss of 0.13 dB, it operates at up to 18 GHz frequency for applications requiring a 50 ohm characteristic impedance in panel mount setups.
23_SMA-50-0-13/111_NH
23_SMA-50-0-13/111_NH by Huber+suhner Ag is a SSMA Connector with threaded coupling, gold shell finish, and 50 ohm impedance. It has a max operating frequency of 18 GHz and is suitable for commercial applications requiring RF SMA connectors with durability up to 500 cycles.
142-1701-206
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; MIL Conformity: NO; Additional Features: STANDARD: MIL-C-39012;
16SMA-50-2-100/199NH
16SMA-50-2-100/199NH by Huber+suhner Ag is an RF SMA connector with a threaded coupling type. It has an insertion loss of 0.5 dB and operates at frequencies up to 26.5 GHz. Ideal for commercial applications requiring a durable, right-angle plug with a characteristic impedance of 50 ohm.
M39012/56-3030
Winchester Interconnect
M39012/56-3030 by Winchester Interconnect is a SSMA connector with a body length of 0.7" and depth of 1.04". It has a snap coupling type and is made of stainless steel. This RF SMA connector operates at a max frequency of 12.4 GHz and is commonly used in cable applications for its crimp termination and 50 ohm characteristic impedance.
132101
Amphenol 132101 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 18 GHz with POLYTETRAFLUOROETHYLENE insulator material, BRASS contact material, and 50 ohm impedance. Suitable for cable mounting with SOLDER termination type and MALE contact gender.
1050547-1
TE Connectivity
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Ports: 1;
132357-11
Amphenol 132357-11 is a SSMA connector with dimensions of 0.375" x 0.312" x 0.562". With a dielectric voltage of 1400VAC, it has a characteristic impedance of 50 ohm and operates up to 18 GHz. Ideal for RF applications, this gold-finished connector offers durability with 500 cycles and surface mount termination in commercial settings.
1051690-1
TE Connectivity's 1051690-1 is an RF SMA connector with a threaded coupling type and TFE fluorocarbon insulator material. It has a max operating temperature of 165°C and can handle frequencies up to 12.4 GHz. This connector is commonly used in applications requiring a 50 ohm characteristic impedance, such as cable mounting for SF 142B cables.
142-0307-411
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 12.4 GHz; DIN Conformance: NO; Characteristic Impedance: 50 ohm;
16_SMA-50-2-106/111_NE
16_SMA-50-2-106/111_NE by Huber+suhner Ag is an RF SMA connector with gold/nickel finish, suitable for G_02232_D cables. Featuring a threaded coupling type and brass shell material, it offers a characteristic impedance of 50 ohm and operates up to 18 GHz. Ideal for commercial applications requiring durability with 500 cycles lifespan.
142-0203-101
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Coupling Type: THREADED; Termination Type: CLAMP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132134RP
The Amphenol 132134RP is a SSMA connector with dielectric voltage of 1400VAC, operating temperature range from -65 to 165°C, and impedance of 50 ohm. Ideal for RF applications up to 18 GHz, it features gold-nickel finish, PTFE insulator, and brass shell for reliable commercial use in board mounting setups.
132134
Amphenol 132134 is an RF SMA connector with threaded coupling, gold over nickel finish, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and female contact gender. Ideal for board mounting applications requiring a straight jack configuration.
132134-15
Amphenol 132134-15 is an RF SMA connector with a threaded coupling type, suitable for board mounting. With a dielectric voltage of 1400VAC, it operates b/w -65 to 165°C and has a max frequency of 12.4 GHz. The connector features a gold shell finish, PTFE insulator material, and offers durability up to 500 cycles.
132114
Amphenol 132114 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and CRIMP termination on CABLE mounting.
132134-10
Amphenol 132134-10 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for surface mount termination in applications requiring a female jack connector on a straight board mount.
132114RP
132114RP by Amphenol is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. It is a male plug connector for crimp solder termination on cables. Ideal for applications requiring reliable RF connections in straight mounting configurations.
132134-11
Amphenol 132134-11 is a RF SMA connector with threaded coupling, suitable for board mounting. Features include gold shell finish, PTFE insulator, and brass shell material. With 50 ohm impedance and max frequency of 18 GHz, it's ideal for high-frequency applications in temperatures ranging from -65 to 165°C.
132113RP
Amphenol's 132113RP is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a characteristic impedance of 50 ohm and is commonly used with RG-58C/U cables for commercial applications.
132123RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Shell Finish: GOLD; Mounting Style: RIGHT ANGLE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Option-1: LOCKING;
132108
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Voltage Standing Wave Ratio: 1.14; Mounting Type: CABLE AND PANEL;
132170-12N
132136-12
Amphenol 132136-12 is an RF SMA connector with gold shell finish, brass shell material, and PTFE insulator. It has a right-angle mounting style for board termination. Ideal for commercial applications requiring reliable coaxial connections in tight spaces.
132113
Amphenol 132113 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.14 dB Insertion Loss, and 1000VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-58 cable type, operating from -65 to 165 °C at frequencies up to 12.4 GHz.
132108RP
The Amphenol 132108RP is an RF SMA connector with a body depth of 0.31". It features a gold shell finish and PTFE insulator material. Ideal for commercial applications, this SSMA connector has a male contact gender and straight mounting style.
132118-RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Filter Feature: NO; No. of Ports: 1; Shell Finish: GOLD;
132178
Amphenol 132178 is an RF SMA connector with 0.14 dB insertion loss, threaded coupling type, and gold termination contact finish. It has a max operating frequency of 12.4 GHz and is suitable for applications requiring a 50 ohm characteristic impedance, such as cable mounting in high-frequency communication systems.
132111
The Amphenol 132111 SSMA Connector features 0.14 dB insertion loss, GOLD termination contact finish, and THREADED coupling type. Ideal for RF applications up to 12.4 GHz, this connector has a POLYTETRAFLUOROETHYLENE insulator and BRASS contact material for reliable performance in high-frequency environments.
132117
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Insulator Color: NATURAL; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved