Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 132117 is an RF SMA connector with 0.14 dB insertion loss, 1.4 VSWR, and 12.4 GHz max operating frequency. Ideal for applications requiring threaded coupling, gold termination finish, and 50 ohm characteristic impedance such as cable mounting in high-frequency communication systems.
Median Price
$7.200
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$6.100
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$6.280
$5.064
$6.406
RS Americas
$6.980
$5.030
Arrow
$7.039
$5.538
Farnell
$7.080
$5.880
$5.730
Powell Electronics
$7.190
$5.630
Interstate Connecting
$7.209
$5.989
$5.810
TTI
$8.090
$5.830
$4.960
$4.910
Element14
$8.348
$6.932
$5.441
Newark
$11.600
$9.840
$9.190
RS (Exports)
$13.370
DigiKey
$17.290
Master Electronics
$5.250
$4.580
$4.560
Verical
$7.318
$7.082
Freelance Electronics
$3.105
DF Sales Co.
$4.800
TestEquity
$8.240
Nova Conductors
$16.710
VNN
Electro Sonic
$5.290
$4.220
$3.970
Vyrian
Quittner & Schimek s.r.o.
EMSNET
American Microsemiconductor Inc.
Aztec Data Supply Inc.
$1.111
Abianca Electronics
$2.831
$2.718
Ampacity Inc.
$3.090
Semicontronic
$3.013
$2.997
Gateway Technologies
$5.374
$4.782
Singapore Electronics
$5.911
$5.497
$5.260
$5.024
Allen Electronics Distributors
$6.550
$5.130
Continental Prestige Electronics
$8.620
$7.100
Netroflash
$16.376
Argo Parts USA
Perfect Parts
Low insertion loss ensures minimal signal loss and maximum efficiency in signal transmission.
Gold termination contact finish provides excellent conductivity and corrosion resistance, ensuring reliable connections.
Compact body depth allows for easy integration in various applications where space is limited.
Threaded coupling type ensures secure and stable connections, reducing the chances of signal interference or disruption.
PTFE insulator material offers high dielectric strength and low signal loss, maintaining signal integrity.
Gold shell finish provides excellent durability and conductivity, ensuring long-term performance.
RF SMA connector is a widely used standard in the industry, ensuring compatibility with a variety of devices and systems.
Low VSWR of 1.4 indicates efficient power transfer and minimal signal reflections, leading to better overall performance.
Natural insulator color simplifies identification and installation, making it user-friendly.
Cable mounting type allows for easy installation and integration into cable assemblies.
50 ohm characteristic impedance is a standard in RF communications, ensuring compatibility and efficient signal transmission.
Brass shell material offers a good balance of durability and conductivity, ensuring long-term performance.
Crimp solder termination type allows for secure and reliable connections, minimizing signal loss and interference.
Female contact gender is commonly used in RF applications and provides versatility in connectivity.
Jack style body or shell offers compatibility with various mating connectors, increasing flexibility in system design.
Straight mounting style simplifies installation and connection, making it ideal for straight-line configurations.
Coaxial contact style ensures efficient signal transmission and maintains signal integrity.
High maximum operating frequency of 12.4 GHz enables use in high-frequency applications, providing versatility and flexibility in system design.
SSMA Connectors 132117 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Termination Contact Finish:
Contact Gender:
Contact Style:
Coupling Type:
Filter Feature:
Insertion Loss:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Info.:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
132117 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
2810-00-512-9729, 2810005129729, 5305-00-013-2117, 5305000132117, 5305-99-128-0743, 5305991280743, 5305-99-341-4063, 5305993414063, 5930-99-796-1534, 5930997961534, 5962-23-112-2368, 5962231122368, 7420-14-315-3309, 7420143153309
NIIN
005129729, 000132117, 991280743, 993414063, 997961534, 231122368, 143153309
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taiwan Semiconductor
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Silicon Standard
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
Philips Semiconductors
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
M39012/57-3029
Sv Microwave
RF SMA CONNECTOR; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1; Insulation Resistance: 5000000000 ohm; Mounting Type: CABLE;
M39012/55-3026
TE Connectivity
TE Connectivity's M39012/55-3026 SSMA Connector features 50 ohm impedance, 0.06 dB insertion loss, and 1.15 VSWR. Ideal for RF applications up to 12.4 GHz, it has a threaded coupling type and stainless steel shell material for durability in harsh environments. With MIL conformity and crimp termination, this connector is suitable for high-frequency cable connections.
MP-19-02V-11-TGG
SPC TECHNOLOGY/ MULTICOMP
RF SMA CONNECTOR;
142-0771-821
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO; Mating Contact Finish: GOLD;
1050525-1
TE Connectivity's 1050525-1 SSMA Connector features gold termination, 50 ohm impedance, and 18 GHz frequency. Ideal for RF applications with RG402 semi-rigid cables, it offers low insertion loss of 0.13 dB and high insulation resistance of 5000000000 ohm.
142-0694-101
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: VSWR AT 12.4 GHZ: 1.34, INSERTION LOSS MAX AT 10 GHZ; JESD-609 Code: e4; Panel Mount: NO;
M39012553126
Amphenol
Amphenol M39012553126 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and 165°C Max Operating Temperature. Ideal for RF applications with RG-316 cable types, it offers a characteristic impedance of 50 ohm and can operate up to 12.4 GHz frequency.
132231
The Amphenol 132231 SSMA Connector features a low insertion loss of 0.14 dB and a dielectric voltage rating of 1400VAC. With a threaded coupling type, it is ideal for RF applications up to 12.4 GHz. This durable connector has a gold shell finish, operates in temperatures ranging from -65°C to 165°C, and is suitable for commercial use with LMR240 cables.
CONSMA001-SMD-G
Linx Technologies
The Linx Technologies CONSMA001-SMD-G is an RF SMA connector with gold finish, suitable for surface mount termination. Featuring a body length of 0.276", diameter of 0.212", and insulator made of PTFE, it is commonly used in applications requiring high-frequency coaxial connections.
447-1
San-tron
The San-tron 447-1 RF BNC Connector is a panel mount jack with 50 ohm impedance, suitable for commercial applications up to 4 GHz. It features a dielectric voltage of 2100VAC, insulation resistance of 5G ohm, and operates in temperatures ranging from -65 to 165°C.
132134-11
Amphenol 132134-11 is a RF SMA connector with threaded coupling, suitable for board mounting. Features include gold shell finish, PTFE insulator, and brass shell material. With 50 ohm impedance and max frequency of 18 GHz, it's ideal for high-frequency applications in temperatures ranging from -65 to 165°C.
R125464271
Radiall S A
The Radiall S A R125464271 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.296 dB and high VSWR of 1.16, suitable for applications up to 18 GHz. This panel mount receptacle with PTFE insulator is ideal for high-frequency communication systems.
142-0701-851
Bel Fuse
The Bel Fuse 142-0701-851 SSMA Connector features a body length of 0.375", insulation resistance of 5G ohm, and dielectric voltage of 1400VAC. Ideal for RF applications up to 18GHz, this female connector with brass shell is designed for surface mount on boards, offering durability with 500 cycles.
R125464270
Radiall S A's R125464270 is a RF SMA Connector with 50 ohm impedance, 0.296 dB insertion loss, and 1.16 VSWR. Ideal for applications up to 18 GHz, it features gold termination on a PTFE insulator in a panel mount receptacle design.
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; DIN Conformance: NO; Panel Mount: NO;
1058576-1
TE Connectivity's 1058576-1 SSMA Connector features 0.42" body diameter, 5000000000 ohm insulation resistance, and 0.281 dB insertion loss. Ideal for RF applications with a max operating frequency of 22 GHz, it is designed for use in panels with RG 178 cable types. The connector has a dielectric voltage of 750VAC and operates b/w -65 to 125 °C.
1052604-1
TE Connectivity 1052604-1 is an SSMA Connector with 0.672" body length, GOLD finish, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 18 GHz, it features a threaded coupling type and PTFE insulator material. Operating temperature range from -65 to 165 °C.
3-1478978-1
TE Connectivity's 3-1478978-1 RF SMA Connector features a 0.532" body length, 0.398" body width, and 0.397" body depth. With an insertion loss of 0.1 dB, it is ideal for applications requiring a 50 ohm characteristic impedance and operating frequencies up to 6 GHz. The connector has a durability of 500 cycles and can withstand temperatures from -65°C to 165°C.
5344
Connecting Devices
RF SMA CONNECTOR; Contact Gender: MALE; Panel Mount: YES; IEC Conformity: NO; Termination Type: TAB; Mating Contact Finish: GOLD (50);
R125.172.000W
R125.172.000W by Radiall S A is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.528 dB. It is commonly used in RF SMA connectors for applications requiring a durable, threaded coupling type with a characteristic impedance of 50 ohm and max operating frequency of 12.4 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132134RP
The Amphenol 132134RP is a SSMA connector with dielectric voltage of 1400VAC, operating temperature range from -65 to 165°C, and impedance of 50 ohm. Ideal for RF applications up to 18 GHz, it features gold-nickel finish, PTFE insulator, and brass shell for reliable commercial use in board mounting setups.
132134
Amphenol 132134 is an RF SMA connector with threaded coupling, gold over nickel finish, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and female contact gender. Ideal for board mounting applications requiring a straight jack configuration.
132134-15
Amphenol 132134-15 is an RF SMA connector with a threaded coupling type, suitable for board mounting. With a dielectric voltage of 1400VAC, it operates b/w -65 to 165°C and has a max frequency of 12.4 GHz. The connector features a gold shell finish, PTFE insulator material, and offers durability up to 500 cycles.
132114
Amphenol 132114 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and CRIMP termination on CABLE mounting.
132134-10
Amphenol 132134-10 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for surface mount termination in applications requiring a female jack connector on a straight board mount.
132114RP
132114RP by Amphenol is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. It is a male plug connector for crimp solder termination on cables. Ideal for applications requiring reliable RF connections in straight mounting configurations.
132113RP
Amphenol's 132113RP is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a characteristic impedance of 50 ohm and is commonly used with RG-58C/U cables for commercial applications.
132123RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Shell Finish: GOLD; Mounting Style: RIGHT ANGLE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Option-1: LOCKING;
132123
Amphenol 132123 is an RF SMA connector with a characteristic impedance of 50 ohm, suitable for RG-174/U cable types. It features a dielectric voltage of 1400VAC and insertion loss of 0.14 dB, making it ideal for applications requiring durability up to 500 cycles at temperatures ranging from -65 to 165 °C.
132108
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Voltage Standing Wave Ratio: 1.14; Mounting Type: CABLE AND PANEL;
132136
Amphenol 132136 is an RF SMA connector with a characteristic impedance of 50 ohm and a max operating frequency of 6 GHz. Featuring gold termination contact finish, it has a durability of 500 cycles and operates b/w -65 to 165 °C. Ideal for board mounting applications in telecommunications and aerospace industries.
132170-12N
132136-12
Amphenol 132136-12 is an RF SMA connector with gold shell finish, brass shell material, and PTFE insulator. It has a right-angle mounting style for board termination. Ideal for commercial applications requiring reliable coaxial connections in tight spaces.
132113
Amphenol 132113 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.14 dB Insertion Loss, and 1000VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-58 cable type, operating from -65 to 165 °C at frequencies up to 12.4 GHz.
132108RP
The Amphenol 132108RP is an RF SMA connector with a body depth of 0.31". It features a gold shell finish and PTFE insulator material. Ideal for commercial applications, this SSMA connector has a male contact gender and straight mounting style.
132118-RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Filter Feature: NO; No. of Ports: 1; Shell Finish: GOLD;
132178
Amphenol 132178 is an RF SMA connector with 0.14 dB insertion loss, threaded coupling type, and gold termination contact finish. It has a max operating frequency of 12.4 GHz and is suitable for applications requiring a 50 ohm characteristic impedance, such as cable mounting in high-frequency communication systems.
132111
The Amphenol 132111 SSMA Connector features 0.14 dB insertion loss, GOLD termination contact finish, and THREADED coupling type. Ideal for RF applications up to 12.4 GHz, this connector has a POLYTETRAFLUOROETHYLENE insulator and BRASS contact material for reliable performance in high-frequency environments.
132116RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Type: CABLE; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved