Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 930-124J-51S is a SSMA RF connector with gold finish, threaded coupling, and 50 ohm impedance. Ideal for applications up to 6 GHz, it features a female jack body style suitable for panel mounting with cable assembly option.
Median Price
$19.350
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$13.980
1k+ parts
$12.481
10k+ parts
-
Mouser Electronics
$20.930
$15.110
$13.490
Powell Electronics
$12.900
$8.940
Vyrian
VNN
Nova Conductors
Gateway Technologies
$7.000
$6.230
Singapore Electronics
$7.700
$7.161
$6.853
$6.544
Ampacity Inc.
$9.900
Netroflash
Allows for secure mounting of the connector to a panel, providing stability and durability to the connection.
Gold finish on contacts ensures excellent conductivity and corrosion resistance, leading to reliable and long-lasting performance.
Threaded coupling provides a secure connection, preventing accidental disconnection in high vibration environments.
RF SMA connector is widely used in RF applications due to its reliable performance and compatibility with SMA connectors.
Low VSWR value of 1.11 indicates minimal signal loss and efficient power transfer, ensuring high quality RF signal transmission.
Standard impedance of 50 ohm ensures compatibility with a wide range of RF systems, making it a versatile choice for various applications.
Comes with the option of cable assembly, providing a convenient solution for connecting the connector to the rest of the system.
Female connector allows for easy mating with male connectors, providing a reliable and secure connection.
Jack style connector is commonly used in RF applications, offering a compact and low-profile design for space-constrained installations.
Straight mounting style allows for easy installation and alignment of the connector, ensuring a proper connection with minimal signal loss.
Supports high-frequency operations up to 6 GHz, making it suitable for a wide range of RF applications including wireless communications and networking.
SSMA Connectors 930-124J-51S attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Maximum Operating Frequency:
Option:
Panel Mount:
Voltage Standing Wave Ratio:
930-124J-51S Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200168
Molex
WIRE AND CABLE;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Hy Electronic
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
EU2B-YS2J03F
Idec
ROTARY SWITCH;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
142-9701-301
Bel Fuse
Bel Fuse's 142-9701-301 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and 0.375" Body Width. Ideal for RF applications up to 18 GHz, with POLYTETRAFLUOROETHYLENE insulator material and GOLD shell finish.
1051788-1
TE Connectivity
TE Connectivity's 1051788-1 SSMA Connector features a body length of 1.3" and gold termination contact finish. With an insertion loss of 0.21 dB, it is ideal for RF applications up to 12.4 GHz. The connector has a threaded coupling type and operates b/w -65°C to 165°C, suitable for cables like RG 400 and RG 223.
132255-11
Amphenol
Amphenol 132255-11 is an RF SMA connector with gold shell finish. It features a 0.375" x 0.312" x 0.562" body made of brass and PTFE insulator. Ideal for commercial applications, it offers right-angle mounting on boards with locking option for secure connections.
11_SMA-50-2-65/119_NH
Huber+suhner Ag
11_SMA-50-2-65/119_NH by Huber+suhner Ag is a threaded RF SMA connector with gold finish, suitable for commercial applications. It features a 50 ohm characteristic impedance, gold-over-nickel mating contact finish, and operates b/w -65 to 165°C. Ideal for cable mounting with durability of 500 cycles at a max frequency of 18 GHz.
142-1701-616
Ef Johnson
RF SMA CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Maximum Operating Frequency: 26.5 GHz; MIL Conformity: NO; Panel Mount: YES;
142-0701-841
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Characteristic Impedance: 50 ohm;
CONSMA003.062
Linx Technologies
Linx Technologies' CONSMA003.062 is a SSMA RF SMA connector with gold finish, threaded coupling, and 50 ohm impedance. Ideal for board and panel mounting in applications requiring reliable signal transmission, such as telecommunications and wireless networking.
M39012/80-3107
TE Connectivity's M39012/80-3107 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.05 dB Insertion Loss, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for RF applications up to 12.4 GHz with MIL-C-39012 reliability standard compliance.
32K10K-400L5
Rosenberger Hochfrequenztechnik & Kg
32K10K-400L5 by Rosenberger is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.11 dB. It features a threaded coupling type, gold termination contact finish, and PTFE insulator material. Ideal for applications requiring high durability and operating frequencies up to 12.4 GHz.
73251-1350
Molex 73251-1350 is an RF SMA connector with 50 ohm impedance, 0.17 dB insertion loss, and 1.07 VSWR. Ideal for board and panel mounting in applications requiring a durable female jack connector with surface mount termination up to 18 GHz frequency range.
1058576-1
TE Connectivity's 1058576-1 SSMA Connector features 0.42" body diameter, 5000000000 ohm insulation resistance, and 0.281 dB insertion loss. Ideal for RF applications with a max operating frequency of 22 GHz, it is designed for use in panels with RG 178 cable types. The connector has a dielectric voltage of 750VAC and operates b/w -65 to 125 °C.
73391-0083
The Molex 73391-0083 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
132147-48
Amphenol 132147-48 is an RF SMA connector with a body depth of 0.31". Featuring a gold shell finish and PTFE insulator, it is ideal for commercial applications requiring reliable coaxial connections. The jack-style connector has a straight mounting style with locking option for secure installations.
SF2921-61356-2S
Sv Microwave
RF SMA CONNECTOR;
SF2960-6025
21_SMA-50-2-15/111_NH
21_SMA-50-2-15/111_NH by Huber+suhner Ag is a threaded RF SMA connector with gold finish, suitable for commercial applications. Featuring a 50 ohm characteristic impedance and gold over nickel mating contact finish, it operates from -65 to 165 °C and supports up to 18 GHz frequency range. Ideal for cable mounting with female gender and jack shell style.
M39012/55-3009
Kings Electronics
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: THREADED; Termination Contact Finish: GOLD; Filter Feature: NO;
Radiall S A
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Termination Contact Finish: GOLD; Characteristic Impedance: 75 ohm;
SMA-J-P-H-ST-EM1
Samtec
SMA-J-P-H-ST-EM1 by Samtec is a RF SMA connector with gold finish, threaded coupling, and 18 GHz operating frequency. Ideal for commercial applications requiring reliable surface mount female connectors on boards.
1-1478979-0
TE Connectivity 1-1478979-0 is an RF SMA connector with threaded coupling, suitable for board mounting. Featuring a 50 ohm characteristic impedance, it operates from -65 to 165°C and supports up to 26 GHz frequency. The female contact connector has a stainless steel shell with gold finish, ideal for commercial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
930-129P-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; IEC Conformity: NO; Mounting Type: CABLE; Manufacturer Series: QMA;
930-112J-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: FEMALE; Maximum Operating Frequency: 6 GHz; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED;
930-114P-51A
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.11; Maximum Operating Frequency: 6 GHz; Coupling Type: THREADED;
930-115P-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; MIL Conformity: NO;
930-120P-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: MALE; MIL Conformity: NO; Mounting Style: STRAIGHT; Mounting Type: CABLE;
930-121J-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Body Depth: .591 inch;
930-122J-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: STRAIGHT;
930-123J-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
930-125J-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Durability: 100 Cycles;
930-126J-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: FEMALE; Mounting Style: STRAIGHT; IEC Conformity: NO; Characteristic Impedance: 50 ohm;
930-127J-51S
RF SMA CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: FEMALE; IEC Conformity: NO; Panel Mount: YES; Characteristic Impedance: 50 ohm;
930-117J-51S
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; DIN Conformance: NO; Minimum Operating Temperature: -40 Cel;
930-102J-51P
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Length: .155 inch; Minimum Operating Temperature: -40 Cel; MIL Conformity: NO;
930-107J-51P
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; Panel Mount: NO; Contact Style: COAX;
930-109J-51S
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 6 GHz; Filter Feature: NO; Minimum Operating Temperature: -40 Cel;
930-116J-51P
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Depth: .434 inch; Body or Shell Style: JACK;
930-119P-51S
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; Body or Shell Style: PLUG; Maximum Operating Frequency: 6 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved