Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol 132284RP is an RF SMA connector with a threaded coupling type and gold shell finish. It features a body depth of 0.414" and insulator material made of PTFE, suitable for RG-174/U cable termination in commercial applications. The connector has a brass shell, crimp termination, and male contact gender for reliable coaxial connections.
Median Price
$15.676
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$17.140
100+ parts
$12.383
1k+ parts
$11.055
10k+ parts
-
Mouser Electronics
$12.380
$11.120
Newark
$20.610
$16.050
Verical
$14.212
Master Electronics
$10.850
$8.040
PSC Electronics
Powell Electronics
$9.910
$7.920
Nova Conductors
$9.917
VNN
Vyrian
IBS Electronics
$16.942
$15.077
Electro Sonic
$12.940
$9.930
Aztec Data Supply Inc.
$3.280
Corohmni
$6.232
Ampacity Inc.
$8.420
Continental Prestige Electronics
$9.719
Netroflash
$9.421
$9.223
Gateway Technologies
$8.826
Singapore Electronics
$10.908
$10.144
$9.708
$9.271
AZTECH Wire
$15.252
Argo Parts USA
The compact body depth allows for easy installation in tight spaces while maintaining a secure connection.
The threaded coupling type ensures a secure connection that is resistant to loosening during vibrations or movements.
The use of Polytetrafluoroethylene as the insulator material provides excellent electrical insulation and high temperature resistance, ensuring reliable performance in demanding environments.
The gold shell finish not only enhances the appearance of the connector but also provides superior conductivity and corrosion resistance.
The RF SMA connector type is widely used in various applications, ensuring compatibility and versatility.
The natural insulator color signifies the high-quality materials used in the construction of the connector.
The cable mounting type allows for easy and secure connection to a compatible cable, ensuring a reliable signal transmission.
The brass shell material provides durability and excellent electrical conductivity, making the connector suitable for long-term use.
Designed for use with RG-174/U cables, ensuring a proper and secure fit for optimal performance.
The crimp termination type simplifies the installation process and ensures a strong connection between the connector and the cable.
The male contact gender is common in RF connectors, providing compatibility with a wide range of devices and equipment.
The plug-style body or shell design makes it easy to connect and disconnect the connector quickly and securely.
The straight mounting style allows for a direct and straightforward installation, perfect for applications where space is limited.
The coax contact style ensures a reliable and interference-free signal transmission, suitable for high-frequency applications.
The locking mounting option provides added security, preventing the connector from accidentally disconnecting during operation.
Designed for commercial use, this connector offers consistent performance and durability in various industrial and commercial applications.
SSMA Connectors 132284RP attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Cable Types:
Connector Type:
Contact Gender:
Contact Style:
Coupling Type:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
132284RP Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
Rectron
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
First Components International
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
16_SMA-50-2-103/111_NE
Huber+suhner Ag
16_SMA-50-2-103/111_NE by Huber+suhner Ag is a SSMA Connector with gold finish, threaded coupling, and 50 ohm impedance. Ideal for RF applications up to 18 GHz, it features a durable brass shell, solder termination, and operates b/w -65°C to 165°C.
142-0771-821
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO; Mating Contact Finish: GOLD;
142-0694-101
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Voltage Standing Wave Ratio: 1.87; Contact Material: NOT SPECIFIED;
142-0711-811
Bel Fuse
Bel Fuse's 142-0711-811 SSMA Connector features a body length of 0.375", dielectric voltage of 1400VAC, and operating temp range from -65 to 165°C. Ideal for RF applications up to 18GHz, this female coax connector with brass shell is designed for board mounting in commercial settings.
CONREVSMA003.062-L
Linx Technologies
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
142-0711-301
Bel Fuse's 142-0711-301 is an RF SMA connector with a body length of 0.25", width of 0.325", and depth of 0.525". It has a max operating frequency of 18 GHz and is commonly used in commercial applications.
R125603000
Radiall S A
R125603000 by Radiall S A is a RF SMA Connector with 1.27 dB Insertion Loss and 1.28 VSWR, suitable for applications up to 18 GHz. Featuring gold-plated contacts with nickel barrier, threaded coupling, and PTFE insulator, it is a panel-mount receptacle connector ideal for hermetic sealing in high-frequency systems.
132119
Amphenol
Amphenol 132119 is an RF SMA connector with threaded coupling, 0.14 dB insertion loss, and 1.4 VSWR. Ideal for panel mount applications up to 12.4 GHz frequency range, featuring a 50 ohm impedance and crimp solder termination for female contacts.
M39012/93-3001
Kings Electronics
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Panel Mount: NO; Characteristic Impedance: 50 ohm;
R125252000
R125252000 by Radiall S A is a panel mount RF SMA connector with a threaded coupling type. It has an insertion loss of 0.1 dB and a voltage standing wave ratio of 1.06, making it suitable for applications requiring high-frequency performance up to 18 GHz.
23_SMA-50-0-324/111_NY
23_SMA-50-0-324/111_NY by Huber+suhner Ag is a threaded RF SMA connector with a characteristic impedance of 50 ohm, suitable for panel mounting. With a max operating frequency of 18 GHz and durability of 500 cycles, it is commonly used in commercial applications requiring reliable signal transmission.
132284RP
16SMA-50-2-100/199NH
16SMA-50-2-100/199NH by Huber+suhner Ag is an RF SMA connector with a threaded coupling type. It has an insertion loss of 0.5 dB and operates at frequencies up to 26.5 GHz. Ideal for commercial applications requiring a durable, right-angle plug with a characteristic impedance of 50 ohm.
8018-6174
Sv Microwave
8018-6174 by Sv Microwave is an RF SMA connector with a characteristic impedance of 50 ohm and max operating frequency of 18 GHz. Featuring gold over nickel termination, it is ideal for applications requiring high-quality signal transmission in aerospace and telecommunications industries. With a threaded coupling type and PTFE insulator material, this connector ensures reliable performance in temperatures ranging from -55 to 125°C.
MP-19-49-5-TGG
Multicomp Pro
RF SMA CONNECTOR;
142-0701-231
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Coupling Type: THREADED; IEC Conformity: NO;
5692
Connecting Devices
RF SMA CONNECTOR; Contact Gender: FEMALE; JESD-609 Code: e4; DIN Conformance: NO; Characteristic Impedance: 50 ohm; Termination Contact Finish: GOLD (50);
R125.464.274
The Radiall S A R125.464.274 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.3 dB and a VSWR of 1.1, making it ideal for applications requiring high-frequency signal transmission up to 18 GHz, such as in telecommunications and aerospace industries.
142-0701-631
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Termination Contact Finish: GOLD (30); Characteristic Impedance: 50 ohm;
1052902-1
TE Connectivity
TE Connectivity's 1052902-1 is an RF SMA connector with threaded coupling, 0.375" body length, and 50 ohm impedance. Ideal for applications requiring a female contact gender, it operates at temperatures from -65 to 125°C and supports frequencies up to 18 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132203-12
Amphenol 132203-12 is an RF SMA connector with gold shell finish, PTFE insulator, and brass shell material. It features a right-angle mounting style for board and panel installation. This SSMA connector has a 0.411" body width and 0.926" body depth, making it ideal for commercial applications requiring reliable coaxial connections.
132289RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Shell Finish: GOLD; Body or Shell Style: RECEPTACLE; Mounting Option-1: LOCKING;
132203RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Contact Finish: NOT APPLICABLE; Durability: 500 Cycles;
132203
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Material: NOT SPECIFIED;
132203-14
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: BOARD AND PANEL; Body Depth: .926 inch;
132203-18
RF SMA CONNECTOR; Reliability: COMMERCIAL; No. of Ports: 1; Mounting Option-1: LOCKING; Mounting Style: RIGHT ANGLE; Termination Type: SOLDER;
132203-16
RF SMA CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; No. of Ports: 1; Termination Type: SOLDER; Shell Material: BRASS;
132284
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Body or Shell Style: JACK; DIN Conformance: NO;
132289
Amphenol 132289 is an RF SMA connector with threaded coupling, gold finish, and 50 ohm impedance. It can withstand up to 1400VAC, operates b/w -65 to 165 °C, and has a max frequency of 18 GHz. Ideal for commercial applications requiring reliable signal transmission in high-frequency environments.
132255-11
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body Width: .312 inch; Total No. of Contacts: 1; Shell Material: BRASS; Termination Type: SURFACE MOUNT;
132225
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE;
132291-12
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Mounting Option-1: LOCKING; Termination Type: SOLDER; Insulator Color: NATURAL;
132255
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 132255; Mating Contact Finish: GOLD; Coupling Type: THREADED;
132231
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
132241
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Termination Type: CRIMP SOLDER; Total No. of Contacts: 1;
132291
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Style: STRAIGHT; Body or Shell Style: JACK;
132231RP
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: LOCKING; No. of Ports: 1; Total No. of Contacts: 1;
132255-12
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Termination Type: SURFACE MOUNT; No. of Ports: 1; Mounting Type: BOARD;
132255-12N
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Contact Material: NOT SPECIFIED; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Contact Finish: NOT APPLICABLE;
132284-10
RF SMA CONNECTOR; Reliability: COMMERCIAL; Mounting Type: CABLE; Body Depth: .414 inch; Body or Shell Style: JACK; Contact Style: COAX;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved