Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
132289RP by Amphenol is an RF SMA connector with a body depth of 0.435". Featuring a gold shell finish and PTFE insulator, it is ideal for commercial applications requiring reliable coax connections. This SSMA connector has a brass shell material and female contact gender, with a straight mounting style and locking option-1.
Median Price
$7.650
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$6.000
100+ parts
$4.010
1k+ parts
-
10k+ parts
Newark
$6.350
Verical
$8.750
$8.330
$7.600
$7.290
DigiKey
$10.240
$7.931
$6.313
Mouser Electronics
$6.400
Farnell
$10.690
$8.080
Element14
$16.620
$13.950
Master Electronics
$6.370
TTI Europe
$2.701
$2.200
Powell Electronics
$7.380
$5.670
$5.230
Chip1Stop
$7.360
Nova Conductors
$6.800
IBS Electronics
$9.425
$8.047
NAC Semi
$14.430
VNN
Electro Sonic
$7.420
$5.270
Vyrian
Prism Electronics
Semicontronic
$2.300
$2.242
$2.231
Ampacity Inc.
$5.000
Aztec Data Supply Inc.
$5.026
Corohmni
$6.164
Gateway Technologies
$6.760
$6.016
Netroflash
Singapore Electronics
$7.436
$6.915
$6.618
$6.320
Continental Prestige Electronics
$9.220
$7.490
GreenTree Electronics
Argo Parts USA
Perfect Parts
Abacus Technologies
Eastek
The compact body depth of 0.435 inch allows for easy installation in tight spaces or crowded areas.
With PTFE insulator material, this connector offers high electrical insulation and stability over a wide range of temperatures.
The gold shell finish provides excellent conductivity and resistance to corrosion, ensuring reliable signal transmission.
As an RF SMA connector, this product is suitable for high-frequency applications with low reflection and insertion loss.
The natural insulator color signifies purity and transparency, allowing for easy identification and maintenance.
Brass shell material offers durability and strength, making this connector suitable for long-term use in various environments.
The female contact gender ensures compatibility with male connectors, providing a secure and reliable connection.
The receptacle style allows for easy mating with corresponding connectors, simplifying installation and maintenance.
The straight mounting style offers a straightforward installation process, suitable for applications where a straight connection is preferred.
With a coaxial contact style, this connector ensures optimal signal transfer and RF performance in high-frequency applications.
The locking mounting option provides added security and stability, preventing accidental disconnection in critical applications.
Designed for commercial use, this connector meets industry standards for reliability and performance, making it a trusted choice for various applications.
SSMA Connectors 132289RP attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Connector Type:
Contact Gender:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
No. of Ports:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Total No. of Contacts:
132289RP Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
Continental Device India
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
73251-0410
Molex
Molex 73251-0410 is an RF SMA connector with threaded coupling, gold nickel termination, and 0.312 dB insertion loss. It has a max operating frequency of 27 GHz and is ideal for commercial applications requiring a 50 ohm characteristic impedance. This female receptacle connector can be panel mounted and offers reliable performance with a VSWR of 1.42.
23_SMA-50-0-13/111_NH
Huber+suhner Ag
23_SMA-50-0-13/111_NH by Huber+suhner Ag is a SSMA Connector with threaded coupling, gold shell finish, and 50 ohm impedance. It has a max operating frequency of 18 GHz and is suitable for commercial applications requiring RF SMA connectors with durability up to 500 cycles.
SMA6252A2-3GT50G-50
Amphenol
Amphenol's SMA6252A2-3GT50G-50 is a threaded RF SMA connector with 50 ohm impedance, PTFE insulator, and solder termination. Ideal for board mounting in applications requiring a female jack connector with right-angle mounting style.
73251-2200
Molex 73251-2200 is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.04 dB. It features a dielectric voltage rating of 1400VAC, suitable for applications requiring high durability and reliability up to 18 GHz frequency operation. The panel mount connector has a female contact gender, right-angle mounting style, and PTFE insulator material for insulation resistance of 5 Gohm.
R124426123W
Radiall S A
R124426123W by Radiall S A is an RF SMA connector with gold termination finish, threaded coupling, and PTFE insulator. It has a characteristic impedance of 50 ohm and operates up to 12.4 GHz. Ideal for board mounting applications requiring high-frequency signal transmission.
TC-400-SM-X
L-com
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: THREADED; IEC Conformity: NO; Mounting Type: CABLE;
63012242124506
Wuerth Elektronik & Kg
RF SMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1051113-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: GOLD; MIL Conformity: NO;
R125.426.000W
R125.426.000W by Radiall S A is a RF SMA CONNECTOR with 50 ohm impedance, 0.05 dB insertion loss, and 1.04 VSWR. It is ideal for board mounting applications in commercial settings, offering durability of 500 cycles and operating frequency up to 18 GHz.
901-9875
Amphenol 901-9875 is an RF SMA connector with threaded coupling, gold termination, and PTFE insulator. It offers low insertion loss of 0.25 dB and VSWR of 1.51 up to 18 GHz. Ideal for panel and cable mounting applications requiring a 50 ohm impedance connection.
2052-1352-02
TE Connectivity's 2052-1352-02 SSMA Connector features gold termination with nickel barrier, threaded coupling, and PTFE insulator. With a frequency range up to 18 GHz, it is ideal for RF applications requiring a 50 ohm impedance. The connector has a female gender, straight mounting style, and operates b/w -65°C to 125°C.
1053354-1
TE Connectivity's 1053354-1 SSMA Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 18 GHz with a female contact gender and solder termination. The connector is designed for commercial reliability in board mounting configurations.
R124.426.123
Radiall S A's R124.426.123 SSMA Connector features 0.21 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 18 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and FEMALE contact gender.
142-9701-301
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; IEC Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
M39012/93-3001
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-C-39012; Mounting Type: BOARD; Mounting Style: STRAIGHT;
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Coupling Type: THREADED; Mounting Style: RIGHT ANGLE;
142-0701-301
Bel Fuse
Bel Fuse's 142-0701-301 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications up to 18 GHz, this durable connector with POLYTETRAFLUOROETHYLENE insulator is designed for commercial use in board mounting setups.
R125238000
R125238000 by Radiall S A is an RF SMA connector with a 50 ohm impedance and 0.21 dB insertion loss. Featuring gold termination contacts, it operates up to 12.4 GHz and is ideal for hermetic applications requiring a threaded coupling type. The connector's PTFE insulator ensures reliable performance in high-frequency environments.
SF2915-6001
Sv Microwave
SF2915-6001 by Sv Microwave is an RF SMA connector with 50 ohm impedance, 12.4 GHz frequency, and 1400VAC dielectric voltage. Ideal for semi-rigid cables in applications requiring durable male plug connectors with right-angle mounting.
132203-12
Amphenol 132203-12 is an RF SMA connector with gold shell finish, PTFE insulator, and brass shell material. It features a right-angle mounting style for board and panel installation. This SSMA connector has a 0.411" body width and 0.926" body depth, making it ideal for commercial applications requiring reliable coaxial connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132203RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Contact Finish: NOT APPLICABLE; Durability: 500 Cycles;
132203
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Material: NOT SPECIFIED;
132203-14
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: BOARD AND PANEL; Body Depth: .926 inch;
132284RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: CRIMP; Shell Finish: GOLD; Total No. of Contacts: 1;
132203-18
RF SMA CONNECTOR; Reliability: COMMERCIAL; No. of Ports: 1; Mounting Option-1: LOCKING; Mounting Style: RIGHT ANGLE; Termination Type: SOLDER;
132203-16
RF SMA CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; No. of Ports: 1; Termination Type: SOLDER; Shell Material: BRASS;
132284
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Body or Shell Style: JACK; DIN Conformance: NO;
132289
Amphenol 132289 is an RF SMA connector with threaded coupling, gold finish, and 50 ohm impedance. It can withstand up to 1400VAC, operates b/w -65 to 165 °C, and has a max frequency of 18 GHz. Ideal for commercial applications requiring reliable signal transmission in high-frequency environments.
132255-11
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body Width: .312 inch; Total No. of Contacts: 1; Shell Material: BRASS; Termination Type: SURFACE MOUNT;
132225
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE;
132291-12
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Mounting Option-1: LOCKING; Termination Type: SOLDER; Insulator Color: NATURAL;
132255
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 132255; Mating Contact Finish: GOLD; Coupling Type: THREADED;
132231
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
132241
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Termination Type: CRIMP SOLDER; Total No. of Contacts: 1;
132291
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Style: STRAIGHT; Body or Shell Style: JACK;
132231RP
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: LOCKING; No. of Ports: 1; Total No. of Contacts: 1;
132255-12
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Termination Type: SURFACE MOUNT; No. of Ports: 1; Mounting Type: BOARD;
132255-12N
RF SMA CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Contact Material: NOT SPECIFIED; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Contact Finish: NOT APPLICABLE;
132285
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved