Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 132118 is an RF SMA connector with a threaded coupling type, gold termination finish, and PTFE insulator. It has an insertion loss of 0.14 dB, withstands up to 1400VAC, and operates b/w -65 to 165°C. Ideal for RG-58 cables in applications requiring high durability and reliability at frequencies up to 12.4 GHz.
Median Price
$7.530
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$4.080
100+ parts
-
1k+ parts
10k+ parts
TTI
$6.560
TTI Europe
$6.715
$5.436
$4.736
$4.637
Arrow
$6.677
$6.503
DigiKey
$7.830
$6.034
$4.808
RS Americas
$8.020
$6.170
Element14
$8.479
$6.277
$5.591
Mouser Electronics
$9.060
$8.450
$7.000
Newark
$9.720
Farnell
$11.951
$9.792
Powell Electronics
$6.270
$4.820
Master Electronics
$4.930
$4.430
$4.410
Verical
$7.059
$6.800
Nova Conductors
$4.612
EMSNET
IBS Electronics
$8.415
$7.153
$7.139
Microwave Components, LLC
Electro Sonic
$5.450
$4.290
$4.270
Kallista Electronics Ltd
Vyrian
American Microsemiconductor Inc.
VNN
Sunrise Surplus Inc.
Elcom Components
Mil-Aero Solutions, Inc.
Advanced Electronics
$4.143
$3.770
$3.397
Abianca Electronics
$4.463
$4.285
Aranea Global
$4.519
$4.339
Ampacity Inc.
$4.550
Gateway Technologies
$4.104
Aztec Data Supply Inc.
$4.900
Singapore Electronics
$5.072
$4.716
$4.514
$4.311
Allen Electronics Distributors
$6.120
Andel Nordic
$22.430
$15.701
Argo Parts USA
Perfect Parts
Continental Prestige Electronics
This feature allows for easy and secure mounting, making it convenient for various applications.
High insulation resistance ensures minimal signal loss and interference, making it a reliable choice for connections.
Low insertion loss indicates efficient signal transmission, ideal for maintaining signal integrity.
High dielectric voltage capacity ensures safe operation and reliable performance in high voltage environments.
Gold contact finish provides excellent conductivity and corrosion resistance for long-lasting connections.
Compact body depth allows for space-efficient installations while maintaining durability.
Threaded coupling ensures a secure and stable connection, suitable for rugged environments.
Polytetrafluoroethylene insulation material offers high temperature and chemical resistance for reliable performance.
With a high maximum operating temperature, this connector can withstand harsh environmental conditions.
Low minimum operating temperature allows for use in extreme cold environments without compromising performance.
Gold shell finish provides both aesthetic appeal and enhanced durability for long-term use.
This specific connector type is commonly used in RF applications due to its reliable performance and compatibility.
Gold mating contact finish ensures a secure and reliable connection, ideal for high-frequency applications.
Low VSWR value indicates minimal signal reflection and loss, ensuring high-quality signal transmission.
Natural insulator color allows for easy identification and maintenance of the connector.
With a durability of 100 cycles, this connector can withstand repeated connections and disconnections without compromising performance.
Versatile mounting options make this connector suitable for various installation requirements.
50 ohm impedance ensures compatibility with standard RF systems, making it a versatile choice for many applications.
Brass shell material provides durability and excellent conductivity for reliable signal transmission.
Compatible with RG-58 cables, allowing for easy integration into existing systems using this cable type.
Crimp termination offers a secure and reliable connection method, suitable for demanding applications.
Female contact gender allows for easy mating with compatible male connectors, providing a reliable connection.
Low contact resistance ensures efficient signal transmission and minimal power loss for optimal performance.
Jack style body or shell design offers compatibility with various mating connectors for versatile connectivity options.
Straight mounting style simplifies installation and alignment, making it easy to integrate into different configurations.
Coaxial contact style ensures consistent signal transmission and minimizes signal interference for high-quality connections.
Locking mounting option provides added security and stability, preventing accidental disconnections in demanding environments.
With a high maximum operating frequency, this connector is suitable for high-speed data transmission and RF applications.
Commercial-grade reliability ensures consistent performance and longevity, making it a dependable choice for various industries.
SSMA Connectors 132118 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body Depth:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
132118 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
3120-21-007-3149, 3120210073149, 5930-17-024-5793, 5930170245793, 7420-14-342-4980, 7420143424980
NIIN
210073149, 170245793, 143424980
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
NXP Semiconductors
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Sensitron Semiconductor
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
142-0701-301
Bel Fuse
Bel Fuse's 142-0701-301 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications up to 18 GHz, this durable connector with POLYTETRAFLUOROETHYLENE insulator is designed for commercial use in board mounting setups.
142-0701-841
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: SMA; Body or Shell Style: RECEPTACLE; JESD-609 Code: e4;
142-0701-201
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Body Depth: .375 inch; Body Diameter: .312 inch;
M39012/56-3107
Sv Microwave
RF SMA CONNECTOR; Reliability: MIL-C-39012; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; MIL Conformity: YES; Maximum Operating Temperature (Cel): 165;
16_SMA-50-2-43/133_NE
Huber+suhner Ag
16_SMA-50-2-43/133_NE by Huber+suhner Ag is a threaded RF SMA connector with 50 ohm impedance, gold over nickel finish, and brass shell. It operates b/w -65 to 165 °C, suitable for applications requiring durability of 500 cycles at up to 18 GHz frequency. Compatible with cable types EZ_86_TP_M17, SUCOFORM_86, MULTIFLEX_86 for solder termination in male plug configuration.
132203-14
Amphenol
Amphenol 132203-14 is a SSMA connector with gold shell finish, PTFE insulator, and brass shell material. It features right-angle mounting, solder termination, and coax contact style. Ideal for commercial applications requiring board or panel mounting with locking option for secure connections.
901-9531-3
Amphenol 901-9531-3 is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 12.4 GHz operating frequency. Ideal for RG-316 cables in commercial applications due to its durable stainless steel shell, gold finish, and PTFE insulator material.
132255-11
Amphenol 132255-11 is an RF SMA connector with gold shell finish. It features a 0.375" x 0.312" x 0.562" body made of brass and PTFE insulator. Ideal for commercial applications, it offers right-angle mounting on boards with locking option for secure connections.
BJ77
Trompeter Electronics
RF SMA/SSMA Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Body or Shell Style: JACK; Body Depth: .487 inch;
16_SMA-50-2-103/111_NH
16_SMA-50-2-103/111_NH by Huber+suhner Ag is a threaded RF SMA connector with 50 ohm impedance, suitable for commercial applications. Featuring gold shell finish, it operates b/w -65 to 165 °C and supports up to 18 GHz frequency. With brass shell material and male contact gender, it offers durability of 500 cycles.
R125.462.000
Radiall S A
Radiall S A's R125.462.000 RF SMA Connector features 0.3 dB insertion loss, 1.1 VSWR, and 50 ohm impedance for up to 18 GHz applications. With a gold termination finish and PTFE insulator, this threaded coupling type connector is panel mountable and has a female contact gender.
R125.075.000
R125.075.000 by Radiall S A is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.21 dB, suitable for applications requiring high durability and reliability up to 12.4 GHz frequency range. Featuring gold termination contact finish, threaded coupling type, and polytetrafluoroethylene insulator material, it offers a max operating temperature of 165°C and min of -65°C for use in commercial settings with RG-141 cable types.
142-0335-401
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); IEC Conformity: NO; Coupling Type: THREADED;
1051660-1
TE Connectivity
TE Connectivity's 1051660-1 SSMA Connector features TFE insulator, gold shell finish, and stainless steel shell material. With a max operating frequency of 18 GHz, it is ideal for RF applications requiring a threaded coupling type and crimp termination on cables like RG 55, RG 223, RG 400, and RG 142.
142-0701-411
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Manufacturer Series: SMA; JESD-609 Code: e4;
11_SMA-50-3-100/111_NE
11_SMA-50-3-100/111_NE by Huber+suhner Ag is a RF SMA CONNECTOR with gold-plated contacts, suitable for applications up to 26.5 GHz. Featuring a threaded coupling type and durable beryllium copper shell, it offers a characteristic impedance of 50 ohm. Ideal for commercial use in cable assemblies requiring reliable signal transmission at temperatures ranging from -65 to 165 °C.
1340153
Phoenix Contact
RF SMA CONNECTOR;
142-0307-411
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Additional Features: APPLICABLE CABLES: RG-58/U; RG-141; RG-303; Characteristic Impedance: 50 ohm;
142-0761-831
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Coupling Type: THREADED;
5692
Carlisle Interconnect Technologies
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 470VAC; No. of Ports: 1; Mounting Option-1: LOCKING;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132134RP
The Amphenol 132134RP is a SSMA connector with dielectric voltage of 1400VAC, operating temperature range from -65 to 165°C, and impedance of 50 ohm. Ideal for RF applications up to 18 GHz, it features gold-nickel finish, PTFE insulator, and brass shell for reliable commercial use in board mounting setups.
132134
Amphenol 132134 is an RF SMA connector with threaded coupling, gold over nickel finish, and PTFE insulator. It has a characteristic impedance of 50 ohm, solder termination, and female contact gender. Ideal for board mounting applications requiring a straight jack configuration.
132134-15
Amphenol 132134-15 is an RF SMA connector with a threaded coupling type, suitable for board mounting. With a dielectric voltage of 1400VAC, it operates b/w -65 to 165°C and has a max frequency of 12.4 GHz. The connector features a gold shell finish, PTFE insulator material, and offers durability up to 500 cycles.
132114
Amphenol 132114 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and CRIMP termination on CABLE mounting.
132134-10
Amphenol 132134-10 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for surface mount termination in applications requiring a female jack connector on a straight board mount.
132114RP
132114RP by Amphenol is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. It is a male plug connector for crimp solder termination on cables. Ideal for applications requiring reliable RF connections in straight mounting configurations.
132134-11
Amphenol 132134-11 is a RF SMA connector with threaded coupling, suitable for board mounting. Features include gold shell finish, PTFE insulator, and brass shell material. With 50 ohm impedance and max frequency of 18 GHz, it's ideal for high-frequency applications in temperatures ranging from -65 to 165°C.
132113RP
Amphenol's 132113RP is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a characteristic impedance of 50 ohm and is commonly used with RG-58C/U cables for commercial applications.
132123RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Shell Finish: GOLD; Mounting Style: RIGHT ANGLE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Option-1: LOCKING;
132123
Amphenol 132123 is an RF SMA connector with a characteristic impedance of 50 ohm, suitable for RG-174/U cable types. It features a dielectric voltage of 1400VAC and insertion loss of 0.14 dB, making it ideal for applications requiring durability up to 500 cycles at temperatures ranging from -65 to 165 °C.
132108
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Voltage Standing Wave Ratio: 1.14; Mounting Type: CABLE AND PANEL;
132136
Amphenol 132136 is an RF SMA connector with a characteristic impedance of 50 ohm and a max operating frequency of 6 GHz. Featuring gold termination contact finish, it has a durability of 500 cycles and operates b/w -65 to 165 °C. Ideal for board mounting applications in telecommunications and aerospace industries.
132170-12N
132136-12
Amphenol 132136-12 is an RF SMA connector with gold shell finish, brass shell material, and PTFE insulator. It has a right-angle mounting style for board termination. Ideal for commercial applications requiring reliable coaxial connections in tight spaces.
132113
Amphenol 132113 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.14 dB Insertion Loss, and 1000VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-58 cable type, operating from -65 to 165 °C at frequencies up to 12.4 GHz.
132108RP
The Amphenol 132108RP is an RF SMA connector with a body depth of 0.31". It features a gold shell finish and PTFE insulator material. Ideal for commercial applications, this SSMA connector has a male contact gender and straight mounting style.
132118-RP
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Filter Feature: NO; No. of Ports: 1; Shell Finish: GOLD;
132178
Amphenol 132178 is an RF SMA connector with 0.14 dB insertion loss, threaded coupling type, and gold termination contact finish. It has a max operating frequency of 12.4 GHz and is suitable for applications requiring a 50 ohm characteristic impedance, such as cable mounting in high-frequency communication systems.
132111
The Amphenol 132111 SSMA Connector features 0.14 dB insertion loss, GOLD termination contact finish, and THREADED coupling type. Ideal for RF applications up to 12.4 GHz, this connector has a POLYTETRAFLUOROETHYLENE insulator and BRASS contact material for reliable performance in high-frequency environments.
132117
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Insulator Color: NATURAL; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved