Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Mounting Style: STRAIGHT; Filter Feature: NO;
Median Price
$4.338
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
PEI Genesis
1+ parts
$2.450
100+ parts
-
1k+ parts
10k+ parts
Powell Electronics
$3.080
$2.750
RS Americas
$3.120
Heilind Electronics
$3.640
$3.033
$2.844
Interstate Connecting
$4.056
$3.532
$3.174
Arrow
$4.265
$3.870
Richardson RFPD
$4.310
$3.240
$2.790
Farnell
$5.344
$4.854
$4.105
Mouser Electronics
$5.840
$4.220
$3.150
$3.140
Element14
$6.680
$6.370
$6.290
RS (Exports)
$6.800
Newark
$8.040
$6.300
$5.730
DigiKey
$9.810
$7.710
Master Electronics
$4.160
$3.490
$3.470
Verical
$4.918
$4.206
Avnet
$3.146
$2.600
Chip1Stop
$7.810
Nova Conductors
$4.200
Voyager Components
$6.789
Electro Sonic
$3.010
$2.860
$2.810
Component Sense
IBS Electronics
$5.527
$4.427
$4.103
Vyrian
SPM Sales
Netsource Technology, Inc.
Elcom Components
Semtec, LLC
Bristol Electronics
VNN
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Legend Electronics Inc.
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
EMSNET
R&J Components
Bisco
Sunrise Surplus Inc.
Ampacity Inc.
$2.020
Argo Parts USA
$3.845
Corohmni
Advanced Electronics
$3.986
$3.787
Aranea Global
$4.116
$3.951
Semicontronic
$4.400
$4.290
$4.268
Aztec Data Supply Inc.
$4.840
Continental Prestige Electronics
$6.130
$4.490
$3.740
Allen Electronics Distributors
$6.180
$4.750
Authorized Procurement Solutions
Kepictronics
Perfect Parts
Metaverse IC Inc.
Robosynatics
$1.850
Lucentia Tech
Computer Components Inc. - USA
Futuretech Components
Speed Components Ltd (Excess)
RTC Component Inc.
SSMA Connectors 142-0711-821 attributes and parameters. Explore more SSMA Connectors devices from Cinch Connectivity Solutions
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
142-0711-821 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Panjit International
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
Eic Semiconductor
Jiangsu Jiejie Microelectronics
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1051156-1
TE Connectivity
TE Connectivity's 1051156-1 SSMA Connector features 0.675" body length, 0.17 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 12 GHz with RG 405 cable type, it has a threaded coupling type and TFE insulator material.
2921-6002
Sv Microwave
The SV Microwave 2921-6002 SSMA Connector features a dielectric voltage of 1400VAC, insulation resistance of 5G ohm, and operating frequency up to 18GHz. Ideal for RF applications requiring a durable female jack connector with a characteristic impedance of 50 ohm.
132106
Amphenol
Amphenol 132106 is an RF SMA Connector with threaded coupling, gold finish, and 50 ohm impedance. Featuring 0.14 dB insertion loss and 1.14 VSWR, it operates up to 18 GHz. Ideal for panel mount applications requiring high-frequency signal transmission with low loss and impedance matching.
16SMA-50-2-100/199NH
Huber+suhner Ag
16SMA-50-2-100/199NH by Huber+suhner Ag is an RF SMA connector with a threaded coupling type. It has an insertion loss of 0.5 dB and operates at frequencies up to 26.5 GHz. Ideal for commercial applications requiring a durable, right-angle plug with a characteristic impedance of 50 ohm.
142-0203-101
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Coupling Type: THREADED; Termination Type: CLAMP;
R125.464.270W
Radiall S A
R125.464.270W by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.07 dB insertion loss, and 18 GHz operating frequency. Ideal for panel mounting in commercial applications, it offers high durability with a gold shell finish and can withstand temperatures from -65 to 165 °C.
23N-50-0-30/133NE
23N-50-0-30/133NE by Huber+suhner Ag is an RF SMA connector with a characteristic impedance of 50 ohm and max operating frequency of 11 GHz. It features a threaded coupling type, brass shell material, and durability of 500 cycles. Ideal for applications requiring reliable cable and panel mounting in high-frequency environments up to 165°C.
142-9701-201
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Type: BOARD; Maximum Operating Frequency: 18 GHz;
901-9511-2
Amphenol 901-9511-2 is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1400VAC dielectric voltage. Ideal for RG-58 cables in commercial applications up to 12.4 GHz frequency due to its gold finish, PTFE insulator, and stainless steel shell.
73251-2200
Molex
Molex 73251-2200 is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.04 dB. It features a dielectric voltage rating of 1400VAC, suitable for applications requiring high durability and reliability up to 18 GHz frequency operation. The panel mount connector has a female contact gender, right-angle mounting style, and PTFE insulator material for insulation resistance of 5 Gohm.
142-0701-501
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Maximum Operating Frequency: 18 GHz; Panel Mount: YES;
R124.426.123
Radiall S A's R124.426.123 SSMA Connector features 0.21 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 18 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and FEMALE contact gender.
11_SMA-50-2-65/119_NE
11_SMA-50-2-65/119_NE by Huber+suhner Ag is a RF SMA connector with gold finish, suitable for commercial applications. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it offers durability up to 500 cycles. This threaded coupling type connector has a temperature range from -65°C to 165°C, making it ideal for various cable mounting applications.
901-10510-2
Amphenol's 901-10510-2 is an RF SMA connector with a threaded coupling type. It has a max operating frequency of 26.5 GHz and can withstand temperatures ranging from -65 to 165°C. This connector, suitable for board mounting, is commonly used in applications requiring high insulation resistance and low contact resistance.
R125603000
R125603000 by Radiall S A is a RF SMA Connector with 1.27 dB Insertion Loss and 1.28 VSWR, suitable for applications up to 18 GHz. Featuring gold-plated contacts with nickel barrier, threaded coupling, and PTFE insulator, it is a panel-mount receptacle connector ideal for hermetic sealing in high-frequency systems.
142-0701-631
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Insulator Material: POLYTETRAFLUOROETHYLENE;
73391-0083
The Molex 73391-0083 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
132173
Amphenol 132173 is an SSMA connector with a threaded coupling type. It has a max operating frequency of 12.4 GHz and can withstand temperatures from -65 to 165 °C. This plug-style connector is commonly used in RF applications requiring a durable, high-frequency connection.
R124426123W
R124426123W by Radiall S A is an RF SMA connector with gold termination finish, threaded coupling, and PTFE insulator. It has a characteristic impedance of 50 ohm and operates up to 12.4 GHz. Ideal for board mounting applications requiring high-frequency signal transmission.
R125.055.000
R125.055.000 by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.15 dB insertion loss, and 1.26 VSWR. It is suitable for applications requiring a durable, threaded coupling type connector with gold over nickel finish, operating in temperatures ranging from -65 to 125 °C at frequencies up to 26.5 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142-0701-851
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; IEC Conformity: NO; Mounting Style: STRAIGHT;
Bel Fuse
The Bel Fuse 142-0701-851 SSMA Connector features a body length of 0.375", insulation resistance of 5G ohm, and dielectric voltage of 1400VAC. Ideal for RF applications up to 18GHz, this female connector with brass shell is designed for surface mount on boards, offering durability with 500 cycles.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; DIN Conformance: NO; Panel Mount: NO;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Type: BOARD;
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Coupling Type: THREADED; Insulator Material: POLYTETRAFLUOROETHYLENE;
142-0701-801
Emerson Electric
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Termination Type: SOLDER;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; DIN Conformance: NO; Maximum Operating Frequency: 18 GHz;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; Insulator Material: POLYTETRAFLUOROETHYLENE; Contact Style: COAX;
Bel Fuse's 142-0701-801 SSMA Connector features a dielectric voltage of 1400VAC, insulation resistance of 5000000000 ohm, and operates b/w -65 to 165 °C. Ideal for RF applications up to 18 GHz, this female connector with brass shell is durable for 500 cycles in commercial settings.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Additional Features: STANDARD: MIL-C-39012; Manufacturer Series: SMA;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Ports: 1;
142-0701-201
Bel Fuse's 142-0701-201 is an RF SMA connector with a characteristic impedance of 50 ohm and dielectric voltage of 1400VAC. With a durability of 500 cycles, it is ideal for commercial applications requiring high insulation resistance and operating temperatures ranging from -65 to 165°C.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Body Depth: .375 inch; Body Diameter: .312 inch;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Termination Contact Finish: GOLD (30); Mounting Style: STRAIGHT;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Manufacturer Series: SMA; Panel Mount: NO;
142-0701-871
The Bel Fuse 142-0701-871 is an RF SMA connector with a dielectric voltage of 1400VAC, impedance of 50 ohm, and operating frequency up to 18 GHz. It is used in commercial applications requiring durable connectors for board mounting with a right-angle style.
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Maximum Operating Frequency: 18 GHz; Body or Shell Style: RECEPTACLE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Contact Finish: GOLD; JESD-609 Code: e4;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Style: STRAIGHT; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved