Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73251-0111 is an RF SMA connector with threaded coupling, PTFE insulator, and stainless steel shell. It has a characteristic impedance of 50 ohm and is terminated by crimping for RG-55 cables. This plug-style connector is commonly used in commercial applications requiring reliable coaxial connections.
Median Price
$12.675
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$7.430
100+ parts
$5.880
1k+ parts
$4.330
10k+ parts
-
Newark
$17.920
$15.400
$6.650
Digiode
$6.745
Vyrian
VNN
Nova Conductors
AZTECH Wire
$1.470
$1.410
$1.380
$1.360
Aztec Data Supply Inc.
$2.095
Continental Prestige Electronics
$5.870
$4.160
Semicontronic
$6.030
$5.879
$5.849
Corphita
$6.390
Andel Nordic
$17.600
$12.317
Argo Parts USA
Bastille Electronics
Assy Fe
The threaded coupling type ensures a secure and reliable connection, making this product ideal for applications where vibration or movement may occur.
The use of polytetrafluoroethylene as the insulator material provides excellent electrical insulation and high temperature resistance, ensuring reliable performance even in demanding environments.
The RF SMA connector type is commonly used in high-frequency applications, making this product suitable for wireless communication, test equipment, and other RF applications.
The cable mounting type allows for easy installation and removal, making this product convenient for use in various setups.
The 50 ohm characteristic impedance is standard for RF applications, ensuring compatibility with other RF components and systems.
The stainless steel shell material offers durability and corrosion resistance, making this product suitable for use in harsh environments.
The compatibility with RG-55 cable types ensures a proper fit and reliable performance in specific applications requiring this cable type.
The crimp termination type allows for quick and secure attachment of the connector to the cable, ensuring a strong and stable connection.
The male contact gender is commonly used for plug connectors, making this product suitable for connecting to female connectors in various devices or systems.
The plug body or shell style is compact and easy to connect, making this product ideal for applications where space is limited.
The straight mounting style allows for a direct and simple connection, making this product suitable for setups where a straight connector orientation is required.
The coaxial contact style ensures a secure and reliable RF connection, making this product suitable for high-frequency applications that require low signal loss.
The locking mounting option provides additional security and stability, preventing accidental disconnection or loosening of the connector.
The commercial reliability of this product ensures consistent performance and durability, making it a cost-effective choice for various commercial applications.
SSMA Connectors 73251-0111 attributes and parameters. Explore more SSMA Connectors devices from Molex
Additional Features:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Option:
Panel Mount:
Reliability:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
73251-0111 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
LL4148
Rfe International
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
1554216002
Molex
WIRE AND CABLE;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Kec
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
Diotec Semiconductor Ag
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Transys Electronics
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
901-9210-2
Amphenol
Amphenol 901-9210-2 is an RF SMA connector with 0.13 dB insertion loss, 1.14 VSWR, and 18 GHz max operating frequency. It features gold termination finish, PTFE insulator, and stainless steel shell for RG-405 cable applications in commercial reliability settings.
22_SMA-50-0-12/111_NE
Huber+suhner Ag
22_SMA-50-0-12/111_NE by Huber+suhner Ag is an RF SMA CONNECTOR with a characteristic impedance of 50 ohm. It features a threaded coupling type, gold over nickel termination contact finish, and perfluoroalkoxy/polytetrafluoroethylene insulator material. Ideal for applications requiring durability up to 500 cycles, operating temperatures from -65 to 165 °C, and a max frequency of 18 GHz.
132147-48
Amphenol 132147-48 is an RF SMA connector with a body depth of 0.31". Featuring a gold shell finish and PTFE insulator, it is ideal for commercial applications requiring reliable coaxial connections. The jack-style connector has a straight mounting style with locking option for secure installations.
2903-6001
Sv Microwave
The SV Microwave SSMA Connector 2903-6001 features a dielectric voltage of 1050VAC, insulation resistance of 5000000000 ohm, and operates up to 12.4 GHz. Ideal for RF applications, it has a MIL-G-45204 reliability rating and can withstand temperatures from -65 to 165 °C.
16_SMA-50-2-103/111_NE
16_SMA-50-2-103/111_NE by Huber+suhner Ag is a SSMA Connector with gold finish, threaded coupling, and 50 ohm impedance. Ideal for RF applications up to 18 GHz, it features a durable brass shell, solder termination, and operates b/w -65°C to 165°C.
21_SMA-50-2-15/111_NE
21_SMA-50-2-15/111_NE by Huber+suhner Ag is an RF SMA connector with gold/nickel finish, suitable for commercial applications up to 18 GHz. Featuring a threaded coupling type and beryllium copper shell material, it offers a characteristic impedance of 50 ohm. With durability of 500 cycles, this jack-style connector operates b/w -65°C to 165°C.
1052944-1
TE Connectivity's 1052944-1 SSMA Connector features threaded coupling, PTFE insulator, and female contact gender. With a max operating frequency of 18 GHz, it is ideal for RF applications requiring panel mount connectors with straight mounting style.
1051164-1
TE Connectivity's 1051164-1 SSMA Connector features 0.666" body length, 0.18 dB insertion loss, and gold termination contact finish. Ideal for RF applications up to 12.4 GHz with threaded coupling type and PTFE insulator material. Suitable for RG 402 semi-rigid cables in high-temp environments (-65 to 165°C).
141-0701-402
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; MIL Conformity: NO; Coupling Type: THREADED;
5350-3
Connecting Devices
RF SMA CONNECTOR; Contact Gender: MALE; Manufacturer Series: SMA; IEC Conformity: NO; Mating Contact Finish: GOLD (50); Mounting Style: STRAIGHT;
R125.603.000W
Radiall S A
R125.603.000W by Radiall S A is an RF SMA connector with 50 ohm impedance, 1.2 dB insertion loss, and 18 GHz operating frequency for commercial applications. Featuring a gold shell finish, PTFE insulator material, and female contact gender, it offers durability of 500 cycles and operates b/w -40 to 100°C temperatures.
SMA-J-P-GF-RA-SM1
Samtec
SMA-J-P-GF-RA-SM1 by Samtec is a RF SMA connector with gold termination, threaded coupling, and right-angle mounting. Operating at 18 GHz, it's ideal for commercial applications requiring reliable surface mount female connectors.
R125.076.001
Radiall S A R125.076.001 is an RF SMA connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.27 VSWR. It features gold over nickel termination for crimp applications up to 12.4 GHz in cable assemblies requiring threaded coupling for high-frequency signal transmission.
142-0701-851
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Type: BOARD;
16_SMA-50-2-53/119_NH
16_SMA-50-2-53/119_NH by Huber+suhner Ag is an RF SMA connector with gold-plated nickel finish, suitable for commercial applications. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it offers durability up to 500 cycles. This threaded coupling type connector has a temperature range from -65°C to 165°C, making it ideal for various RF cable mounting setups.
142-0701-841
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: SMA; Body or Shell Style: RECEPTACLE; JESD-609 Code: e4;
9408-1113-000
Radiall S A's 9408-1113-000 SSMA Connector features gold termination with nickel barrier, threaded coupling, and PTFE insulator. With a 50 ohm impedance and 18 GHz operating frequency, it is ideal for RF applications requiring high reliability in commercial settings.
142-0721-871
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SOLDER; Contact Material: NOT SPECIFIED;
SMA-J-P-H-ST-PN4
SMA-J-P-H-ST-PN4 by Samtec is a RF SMA connector with 50 ohm impedance, gold-plated contacts, and threaded coupling. It has an insulation resistance of 5 Gohm, dielectric voltage rating of 1400VAC, and operates b/w -65 to 125°C. Ideal for commercial applications requiring reliable connections up to 6 GHz frequency.
11_SMA-50-2-112/133_NE
11_SMA-50-2-112/133_NE by Huber+suhner Ag is a SSMA Connector with gold termination, suitable for RF applications up to 18 GHz. Featuring a threaded coupling type, it has a VSWR of 1.11 and can withstand temperatures from -65 to 165°C. Ideal for commercial use, this connector offers durability with 500 mating cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73251-2201
Molex 73251-2201 is an RF SMA connector with 50 ohm impedance, 0.04 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications requiring high durability, it features a threaded coupling type, gold shell finish, and polytetrafluoroethylene insulator material. Operating b/w -65 to 165°C, it offers reliable performance up to 18 GHz frequency.
73251-1150
Molex 73251-1150 is a SSMA Connector with 0.375" body length, 5000000000 ohm insulation resistance, and 0.04 dB insertion loss. Ideal for RF applications up to 18 GHz, featuring gold nickel termination contact finish and PTFE insulator material. Suitable for commercial use with 50 ohm impedance and 1.06 VSWR.
73251-1350
Molex 73251-1350 is an RF SMA connector with 50 ohm impedance, 0.17 dB insertion loss, and 1.07 VSWR. Ideal for board and panel mounting in applications requiring a durable female jack connector with surface mount termination up to 18 GHz frequency range.
73251-2120
Molex 73251-2120 is an RF SMA connector with 0.04 dB insertion loss and 1.06 VSWR, suitable for panel mount applications. Featuring gold nickel termination, PTFE insulator, and brass shell material, it has a characteristic impedance of 50 ohm. Ideal for commercial use in board and panel mounting setups.
73251-2200
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Coupling Type: THREADED; Shell Material: BRASS;
73251-0211
Molex 73251-0211 is an RF SMA connector with 0.312 dB insertion loss, 1.42 VSWR, and 27 GHz max operating frequency. It is a threaded coupling type plug suitable for cable mounting applications requiring 50 ohm impedance and crimp solder termination.
73251-1352
Molex 73251-1352 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz with FEMALE contact gender, POLYTETRAFLUOROETHYLENE insulator material, and NICKEL shell finish.
73251-2123
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE; No. of Ports: 1;
73251-0112
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: STRAIGHT; No. of Ports: 1; Contact Style: COAX;
73251-0930
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body Depth: .45 inch; Manufacturer Series: 73251; Mounting Option-1: LOCKING; Body or Shell Style: JACK;
73251-2122
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Total No. of Contacts: 1; Characteristic Impedance: 50 ohm;
73251-2121
The Molex 73251-2121 is a SSMA connector with a body depth of 0.45 inch and a gold shell finish. It has 1 port and is designed for RF SMA connections. Its surface mount termination type makes it suitable for commercial applications.
73251-0450
Molex 73251-0450 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-316 cable type, operating in temperatures from -65 to 165 °C.
73251-2300
RF SMA CONNECTOR; Reliability: COMMERCIAL; Characteristic Impedance: 50 ohm; Termination Type: SOLDER; Contact Material: NOT SPECIFIED; Mounting Style: STRAIGHT;
73251-0410
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; No. of Ports: 1;
73251-0451
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Mating Contact Finish: NOT SPECIFIED;
73251-0151
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved