Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 901-9867-RFX is an RF SMA connector with threaded coupling, gold termination, and PTFE insulator. It offers low insertion loss of 0.25 dB and VSWR of 1.25 up to 18 GHz. Ideal for applications requiring a 50 ohm impedance, such as cable mounting in high-frequency environments.
Median Price
$4.260
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$2.380
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$3.870
$3.371
$3.029
Heilind Electronics
$3.920
$3.267
$3.063
Arrow
$4.175
PEI Genesis
$4.300
$3.960
Farnell
$4.590
$3.300
$3.030
RS Americas
$4.640
$3.990
Mouser Electronics
$5.000
$3.620
$3.080
$2.880
DigiKey
$5.010
$3.615
$3.073
$2.881
Newark
$5.730
$4.350
$4.080
Element14
$6.870
$5.250
$4.720
TTI
Powell Electronics
$3.940
$3.000
$2.580
Master Electronics
$3.570
$2.810
Verical
$4.221
$3.933
Maritex
$4.114
$3.331
TME
$4.670
$4.210
TestEquity
$5.340
IBS Electronics
$7.078
$6.246
ECAB
Electro Sonic
$3.170
$2.590
$2.400
Nova Conductors
Chip Stock
R&J Components
VNN
Sunrise Surplus Inc.
Resion
Continental Prestige Electronics
$2.740
$2.720
$2.690
Allen Electronics Distributors
$3.840
Gateway Technologies
$7.000
$6.230
Singapore Electronics
$7.700
$7.161
$6.853
$6.544
Perfect Parts
Kepictronics
Netroflash
Argo Parts USA
Authorized Procurement Solutions
Low insertion loss ensures minimal signal loss during transmission, making this connector suitable for high-frequency applications.
Gold termination contact finish provides excellent conductivity and corrosion resistance, ensuring reliable and long-lasting performance.
Threaded coupling type ensures a secure and stable connection, suitable for applications where vibration or movement may occur.
Polytetrafluoroethylene insulator material offers high dielectric strength and low signal loss, enhancing the overall performance of the connector.
RF SMA connector is a standard and widely used connector type, ensuring compatibility with various devices and equipment in the market.
Gold mating contact finish provides reliable and stable connections, minimizing signal degradation and ensuring signal integrity.
Low VSWR of 1.25 indicates minimal signal reflection and efficient power transfer, making this connector suitable for high-frequency applications.
Cable mounting type allows for easy installation and connection to various cable types, offering flexibility and versatility in installation.
50 ohm characteristic impedance is a standard impedance value for RF connectors, ensuring compatibility with various RF systems and devices.
Solder termination type offers a reliable and durable connection, suitable for applications where a secure and permanent connection is required.
Male contact gender is common in RF connectors and provides a secure connection to female connectors, ensuring reliable signal transmission.
Plug body style is easy to connect and disconnect, making it convenient for applications that require frequent mating and unmating of connectors.
Straight mounting style allows for a direct and simple connection, suitable for applications where a straight-line signal path is required.
High maximum operating frequency of 18 GHz makes this connector suitable for high-frequency applications, including telecommunications and radar systems.
SSMA Connectors 901-9867-RFX attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
901-9867-RFX Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
BAV99WT1G
Fairchild Semiconductor
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
16_SMA-50-3-43/133_NE
Huber+suhner Ag
16_SMA-50-3-43/133_NE by Huber+suhner Ag is a threaded RF SMA connector with gold over nickel mating contact finish. It has a characteristic impedance of 50 ohm, operates b/w -65 to 165 °C, and can handle frequencies up to 18 GHz. Ideal for commercial applications requiring durable connectors with high reliability.
142-0304-411
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 12.4 GHz; Insertion Loss: .21 dB; JESD-609 Code: e4;
142-9701-201
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; IEC Conformity: NO; Mating Contact Finish: GOLD;
1052409-1
TE Connectivity's 1052409-1 SSMA Connector features threaded coupling, 0.528" body depth, and PTFE insulator. Ideal for RF applications up to 18 GHz with 50 ohm impedance. Suitable for board and panel mounting in commercial settings.
132123RP
Amphenol
The Amphenol 132123RP is an RF SMA connector with a body depth of 0.689". It features a gold shell finish, PTFE insulator material, and brass shell material. Ideal for RG-174/U cable termination in commercial applications requiring reliable right-angle mounting with locking option.
MP-19-49-5-TGG
Multicomp Pro
RF SMA CONNECTOR;
R125.464.270W
Radiall S A
R125.464.270W by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.07 dB insertion loss, and 18 GHz operating frequency. Ideal for panel mounting in commercial applications, it offers high durability with a gold shell finish and can withstand temperatures from -65 to 165 °C.
M39012/56-3030
Sv Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Characteristic Impedance: 50 ohm; Filter Feature: NO;
142-0701-301
Bel Fuse
Bel Fuse's 142-0701-301 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications up to 18 GHz, this durable connector with POLYTETRAFLUOROETHYLENE insulator is designed for commercial use in board mounting setups.
132121
The Amphenol 132121 is an RF SMA Connector with a max operating frequency of 12.4 GHz and insertion loss of 0.14 dB. Featuring gold termination contact finish, it is ideal for applications requiring a threaded coupling type, such as panel mount installations in high-frequency communication systems.
142-9701-301
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Coupling Type: THREADED; Mounting Style: RIGHT ANGLE;
M39012/55-3009
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Manufacturer Series: SMA; Coupling Type: THREADED;
1051690-1
TE Connectivity's 1051690-1 is an RF SMA connector with a threaded coupling type and TFE fluorocarbon insulator material. It has a max operating temperature of 165°C and can handle frequencies up to 12.4 GHz. This connector is commonly used in applications requiring a 50 ohm characteristic impedance, such as cable mounting for SF 142B cables.
M39012/93-3001
TE Connectivity's M39012/93-3001 SSMA Connector has 0.375" body length, 5000000000 ohm insulation resistance, and 0.21 dB insertion loss. Ideal for RF applications up to 18 GHz with threaded coupling type and PTFE insulator material. Suitable for commercial use with 50 ohm impedance and gold finish shell in board mounting configuration.
142-0701-841
The Bel Fuse 142-0701-841 SSMA Connector features a body length of 0.375", dielectric voltage of 1400VAC, and operating temperature range from -65 to 165°C. Ideal for RF applications, this female connector with 50 ohm impedance is designed for board mounting in commercial settings with durability up to 500 cycles.
142-4701-801
The Bel Fuse 142-4701-801 is an RF SMA connector with a dielectric voltage of 1400VAC, operating from -65 to 165°C. With a characteristic impedance of 50 ohm and durability of 500 cycles, it's ideal for commercial applications up to 18 GHz requiring high insulation resistance and male contact gender.
M39012/94-3003
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Termination Type: SOLDER; Additional Features: STANDARD: MIL-C-39012;
142-0403-011
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Maximum Operating Frequency: 12.4 GHz; Insertion Loss: .21 dB;
M39012/60-3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Panel Mount: YES; Mounting Style: STRAIGHT;
Winchester Interconnect
M39012/56-3030 by Winchester Interconnect is a SSMA connector with a body length of 0.7" and depth of 1.04". It has a snap coupling type and is made of stainless steel. This RF SMA connector operates at a max frequency of 12.4 GHz and is commonly used in cable applications for its crimp termination and 50 ohm characteristic impedance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
901-9875
Amphenol 901-9875 is an RF SMA connector with threaded coupling, gold termination, and PTFE insulator. It offers low insertion loss of 0.25 dB and VSWR of 1.51 up to 18 GHz. Ideal for panel and cable mounting applications requiring a 50 ohm impedance connection.
901-9511-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Characteristic Impedance: 50 ohm; Insertion Loss: .11 dB;
901-9601-3
Amphenol's 901-9601-3 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.11 dB and can operate at frequencies up to 12.4 GHz. This connector is commonly used in cable applications requiring a 50 ohm characteristic impedance.
901-9511-12SF
Amphenol 901-9511-12SF SSMA Connector features 0.11 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz, with POLYTETRAFLUOROETHYLENE insulator material and 50 ohm impedance. Suitable for cable mounting with CRIMP SOLDER termination type.
901-9210-2
Amphenol 901-9210-2 is an RF SMA connector with 0.13 dB insertion loss, 1.14 VSWR, and 18 GHz max operating frequency. It features gold termination finish, PTFE insulator, and stainless steel shell for RG-405 cable applications in commercial reliability settings.
901-9877-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm;
901-9511-3SF
Amphenol 901-9511-3SF is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.51 VSWR. It is used in commercial applications at frequencies up to 12.4 GHz for reliable signal transmission in high-temp environments.
901-9876-RFX
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; MIL Conformity: NO; Mounting Style: STRAIGHT;
901-9511-1
Amphenol 901-9511-1 SSMA Connector features 0.11 dB insertion loss, GOLD termination, and threaded coupling. Ideal for RF applications up to 12.4 GHz with 50 ohm impedance. Suitable for cable mounting with crimp solder termination and male contact gender.
901-9723
Amphenol 901-9723 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 26.5 GHz with 50 ohm impedance. Suitable for commercial use with durability of 100 cycles.
901-9531-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG; Mounting Type: CABLE;
901-9511-3SFC
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Termination Type: CRIMP; Characteristic Impedance: 50 ohm;
901-9531-3SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; JESD-609 Code: e4;
901-9511-2
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulator Material: POLYTETRAFLUOROETHYLENE;
901-9531-3
Amphenol 901-9531-3 is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 12.4 GHz operating frequency. Ideal for RG-316 cables in commercial applications due to its durable stainless steel shell, gold finish, and PTFE insulator material.
901-9602-3
Amphenol's 901-9602-3 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 12.4 GHz and is commonly used in cable applications for its low insertion loss (0.11 dB) and gold termination contact finish.
901-9531-1
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: COAX; No. of Ports: 1;
901-9531-12SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Material: NOT SPECIFIED;
901-9602-1SF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP SOLDER; Body or Shell Style: JACK; Mounting Type: CABLE;
901-9184-CCSF
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved