Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73251-2200 is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.04 dB. It features a dielectric voltage rating of 1400VAC, suitable for applications requiring high durability and reliability up to 18 GHz frequency operation. The panel mount connector has a female contact gender, right-angle mounting style, and PTFE insulator material for insulation resistance of 5 Gohm.
Median Price
$4.470
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Newark
1+ parts
$2.740
100+ parts
1k+ parts
10k+ parts
-
Avnet
$3.747
$3.077
Interstate Connecting
$3.843
Heilind Electronics
$4.133
Chip1Stop
$5.300
$2.680
$2.350
$2.310
Sager
$5.420
Mouser Electronics
$5.530
$4.430
$3.720
Arrow
$5.638
$4.255
$3.608
DigiKey
$6.880
$4.877
$4.016
RS Americas
$6.980
$4.190
Element14
$7.032
$6.481
$6.288
Verical
$4.307
$3.185
Master Electronics
$4.530
$3.890
$3.690
Farnell
$2.970
TTI
$4.080
$4.000
Powell Electronics
$3.760
$3.630
$3.560
TTI Europe
$4.411
$4.019
$3.834
RS (Exports)
$5.120
$4.719
Digiode
$3.926
Nova Conductors
$4.196
TME
$4.990
$4.100
Bristol Electronics
$6.384
$3.001
NAC Semi
$5.600
Chip Stock
IBS Electronics
$4.698
$3.506
Vyrian
VNN
ComSIT Distribution GmbH
Sensible Micro Corp
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Prism Electronics
Semicontronic
$2.520
$2.457
$2.444
Aztec Data Supply Inc.
$3.195
Corphita
Modulus Dynamics
$3.970
Advanced Electronics
$4.089
$3.885
Netroflash
$3.987
$3.903
Argo Parts USA
Continental Prestige Electronics
$5.980
$3.870
$3.180
Andel Nordic
$10.056
$9.654
Authorized Procurement Solutions
Perfect Parts
GreenTree Electronics
Abacus Technologies
Robosynatics
$3.891
$3.811
Lucentia Tech
Speed Components Ltd (Excess)
Assy Fe
Eastek
Allows for secure and stable installation on a panel, reducing the risk of damage during use.
High insulation resistance ensures minimal signal loss and interference, leading to reliable performance.
Low insertion loss ensures efficient signal transmission without significant loss of power.
High dielectric voltage rating provides safety and protection against electrical breakdown.
Compact body depth allows for easy installation in limited space applications.
Threaded coupling ensures secure connection and resistance to vibration or shock.
PTFE insulator material offers excellent electrical properties and high temperature resistance for dependable performance.
High maximum operating temperature allows for use in a wide range of environments without performance degradation.
Low minimum operating temperature ensures functionality in extreme cold conditions.
Nickel shell finish provides corrosion resistance and durability for long-lasting performance.
RF SMA connector type is widely used and compatible with many devices, offering versatility in connectivity options.
Low VSWR indicates efficient power transfer between connected components.
Withstands repeated mating and unmating cycles for prolonged use and reliability.
Offers flexibility in mounting options for various applications and installations.
Standard impedance rating ensures compatibility with a wide range of RF devices and systems.
Brass shell material provides strength and durability in demanding environments.
Solder termination ensures secure and reliable connections for optimal signal transmission.
Female contact gender is commonly used for RF applications and offers compatibility with various connectors.
Low contact resistance minimizes signal loss and ensures efficient power transfer.
Jack body style is versatile and compatible with a range of mating connectors and adapters.
Right angle mounting style allows for space-saving and versatile installation options.
Coaxial contact style ensures reliable signal transmission and reduces interference.
Optimal terminal length for secure connections and efficient signal transmission.
Locking mounting option provides additional security and stability during use.
High frequency rating allows for use in high-speed data transfer applications without signal degradation.
Designed for commercial use, ensuring consistent performance and durability in various applications.
SSMA Connectors 73251-2200 attributes and parameters. Explore more SSMA Connectors devices from Molex
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
Dielectric Withstanding Voltage (V):
Durability:
Insertion Loss:
Insulation Resistance:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73251-2200 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Littelfuse
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Lite-on Semiconductor
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
142-0711-811
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE; Total No. of Contacts: 1;
M39012/55-3026
Delta Electronics Manufacturing
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Termination Type: CRIMP; IEC Conformity: NO;
1340153
Phoenix Contact
RF SMA CONNECTOR;
1052098-1
TE Connectivity
1052098-1 by TE Connectivity is an SSMA Connector with 0.665" body length, 10000000000 ohm insulation resistance, and 0.25 dB insertion loss. Ideal for RF applications up to 12.4 GHz, it features a threaded coupling type and PTFE insulator material.
132289
Amphenol
Amphenol 132289 is an RF SMA connector with threaded coupling, gold finish, and 50 ohm impedance. It can withstand up to 1400VAC, operates b/w -65 to 165 °C, and has a max frequency of 18 GHz. Ideal for commercial applications requiring reliable signal transmission in high-frequency environments.
141-0701-402
Vertiv
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1; Maximum Operating Frequency: 18 GHz;
11_SMA-50-3-77/119_NH
Huber+suhner Ag
11_SMA-50-3-77/119_NH by Huber+suhner Ag is a threaded RF SMA connector with gold over nickel finish. Featuring 50 ohm impedance, it operates up to 18 GHz and is ideal for MIL and IEC conformity applications requiring male solder termination on cables.
M39012/80-3107
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mating Contact Finish: NOT SPECIFIED; Additional Features: STANDARD: MIL-C-39012;
5-1814400-1
TE Connectivity 5-1814400-1 is an RF SMA connector with threaded coupling, suitable for board mounting. With a characteristic impedance of 50 ohm and max operating frequency of 3 GHz, it features a zinc alloy shell and polytetrafluoroethylene insulator material. Ideal for applications requiring high-frequency signal transmission in electronic devices.
132231
The Amphenol 132231 SSMA Connector features a low insertion loss of 0.14 dB and a dielectric voltage rating of 1400VAC. With a threaded coupling type, it is ideal for RF applications up to 12.4 GHz. This durable connector has a gold shell finish, operates in temperatures ranging from -65°C to 165°C, and is suitable for commercial use with LMR240 cables.
R125603000
Radiall S A
R125603000 by Radiall S A is a RF SMA Connector with 1.27 dB Insertion Loss and 1.28 VSWR, suitable for applications up to 18 GHz. Featuring gold-plated contacts with nickel barrier, threaded coupling, and PTFE insulator, it is a panel-mount receptacle connector ideal for hermetic sealing in high-frequency systems.
1045598-1
TE Connectivity's 1045598-1 is an RF SSMA connector with a threaded coupling type and a body depth of 0.31 inch. It has a max operating frequency of 38 GHz and is commonly used in commercial applications requiring a 50 ohm characteristic impedance.
1050525-1
TE Connectivity's 1050525-1 SSMA Connector features gold termination, 50 ohm impedance, and 18 GHz frequency. Ideal for RF applications with RG402 semi-rigid cables, it offers low insertion loss of 0.13 dB and high insulation resistance of 5000000000 ohm.
SF8018-6007
Sv Microwave
R125075000
Radiall S A R125075000 is an RF SMA connector with 1.08 dB insertion loss and 1.06 VSWR, suitable for up to 18 GHz frequency applications. It features gold termination contact finish, threaded coupling type, and PTFE insulator material for reliable performance in cable mounting setups.
5646
Connecting Devices
5646 by Connecting Devices is an RF SMA connector with gold finish, threaded coupling, and 50 ohm impedance. It features a panel mount design, female contact gender, and right angle mounting style. Ideal for applications requiring secure connections in RF systems with high frequency signals.
SF2921-61345-2S
R125055002
The Radiall S A R125055002 SSMA Connector features low insertion loss of 0.02 dB and gold termination for optimal performance. With a threaded coupling type, it is ideal for RF applications up to 18 GHz, offering a VSWR of 1.05 and a characteristic impedance of 50 ohms.
132170-12N
142-0701-501
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: SMA; MIL Conformity: NO; Characteristic Impedance: 50 ohm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73251-2201
Molex
Molex 73251-2201 is an RF SMA connector with 50 ohm impedance, 0.04 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications requiring high durability, it features a threaded coupling type, gold shell finish, and polytetrafluoroethylene insulator material. Operating b/w -65 to 165°C, it offers reliable performance up to 18 GHz frequency.
73251-1150
Molex 73251-1150 is a SSMA Connector with 0.375" body length, 5000000000 ohm insulation resistance, and 0.04 dB insertion loss. Ideal for RF applications up to 18 GHz, featuring gold nickel termination contact finish and PTFE insulator material. Suitable for commercial use with 50 ohm impedance and 1.06 VSWR.
73251-1350
Molex 73251-1350 is an RF SMA connector with 50 ohm impedance, 0.17 dB insertion loss, and 1.07 VSWR. Ideal for board and panel mounting in applications requiring a durable female jack connector with surface mount termination up to 18 GHz frequency range.
73251-2120
Molex 73251-2120 is an RF SMA connector with 0.04 dB insertion loss and 1.06 VSWR, suitable for panel mount applications. Featuring gold nickel termination, PTFE insulator, and brass shell material, it has a characteristic impedance of 50 ohm. Ideal for commercial use in board and panel mounting setups.
73251-0211
Molex 73251-0211 is an RF SMA connector with 0.312 dB insertion loss, 1.42 VSWR, and 27 GHz max operating frequency. It is a threaded coupling type plug suitable for cable mounting applications requiring 50 ohm impedance and crimp solder termination.
73251-1352
Molex 73251-1352 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz with FEMALE contact gender, POLYTETRAFLUOROETHYLENE insulator material, and NICKEL shell finish.
73251-2123
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Insulator Material: POLYTETRAFLUOROETHYLENE; No. of Ports: 1;
73251-0112
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: STRAIGHT; No. of Ports: 1; Contact Style: COAX;
73251-0930
RF SMA CONNECTOR; Reliability: COMMERCIAL; Body Depth: .45 inch; Manufacturer Series: 73251; Mounting Option-1: LOCKING; Body or Shell Style: JACK;
73251-2122
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Total No. of Contacts: 1; Characteristic Impedance: 50 ohm;
73251-2121
The Molex 73251-2121 is a SSMA connector with a body depth of 0.45 inch and a gold shell finish. It has 1 port and is designed for RF SMA connections. Its surface mount termination type makes it suitable for commercial applications.
73251-0450
Molex 73251-0450 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-316 cable type, operating in temperatures from -65 to 165 °C.
73251-0111
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; Termination Type: CRIMP;
73251-2300
RF SMA CONNECTOR; Reliability: COMMERCIAL; Characteristic Impedance: 50 ohm; Termination Type: SOLDER; Contact Material: NOT SPECIFIED; Mounting Style: STRAIGHT;
73251-0410
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; No. of Ports: 1;
73251-2206
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Shell Material: BRASS; Maximum Operating Frequency: 18 GHz;
73251-2208
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Durability: 500 Cycles; Voltage Standing Wave Ratio: 1.07;
73251-2203
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulation Resistance: 5000000000 ohm; Minimum Operating Temperature: -65 Cel;
73251-2209
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Characteristic Impedance: 50 ohm; Body Depth: .77 inch;
73251-2202
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Option-1: LOCKING; Maximum Operating Frequency: 18 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved